COOLED - 986 Annonces

Jeudi 21 avril 2022

Prix : 100USD

Features of thermal imaging for boats High sensitivity cooled infrared, long-distance observation, clear image Infrared triple view, duel view or continuous zoom lens is optional HD fog penetrating telephoto lens, auto focus Laser ranging, laser lighting module are optional Radar tracking...

Jeudi 21 avril 2022

Prix : 100USD

Gas leak camera is an instrumentation tool for infrared gas leak detector. Below are two of our featured gas leak detection cameras. Application of Infrared Gas Imaging Camera Most of the gases have characteristic absorption peaks in the mid-infrared region, and the concentration...

Jeudi 21 avril 2022

Prix : 100USD

Cooled Thermal Systems 1. Basic Concept The first is a cooled thermal imaging core. The imaging detector of the cooled infrared camera core is equipped with an integrated cryogenic refrigerator unit. This is a device that reduces the detector temperature to the cooling temperature...

Mercredi 20 avril 2022

Our Ventilation series products include energy recovery ventilator(ERV), heat recovery ventilator(HRV) and some single ventilator (without heat recovery core). As for HRV and ERV, its function are not only as common exhausting fan but also a fresh air ventilation system. It helps...

Mercredi 20 avril 2022

Quantité : more than - Prix : 3000-6500 euro per M

Description of Cold Rolled Coil Cold rolled coil, as known as CR coil, CRS or CRC. Cold rolled steel coils are a farther product that uses hot rolled steel coils to do further processing. The further processed steel coil put in a cold rolling mill where the material is cooled (at...)

Mercredi 20 avril 2022

Quantité : more than - Prix : 3000-6500 euro per M

Aluminum Ingot Product Details and Application Aluminum is a silver-white metal and ranks third in the earth's crust after oxygen and silicon. The density of aluminum is relatively small, only 34.61% of iron and 30.33% of copper, so it is also called light metal. Aluminum is a non-ferrous...

Mercredi 20 avril 2022

Mesh Net for Sale The HDPE net is a food grade plastic raw material (HDPE) which is heated and melted in an extruder, extruded through a screw, and enters an extra-rotary head with a small hole in the surface of the mold. The molten plastic flows through the pores of the die to form...

Mardi 19 avril 2022

Prix : 10-30USD

Employing advanced frequency conversion technology and microelectronic technology, the CNC router inverter can effectively change the frequency and speed of spindle motors like the air cooled spindle motor and the water cooled spindle motor. While using the inverter, it should be...

Mardi 19 avril 2022

Prototype molds are rapid processing for the molds. It's totally different from production molds as they can't be used in the long term. As a professional mold maker for over 15 years,Packson can handle all kinds of mold including prototypes. We bring not only high skilled engineering...

Samedi 16 avril 2022

Quantité : 10 product - Prix : USD 30,000.00-700,00

Plastic extrusion is defined as a manufacturing process (high-volume), in which the raw plastic / raw plastic material is melted and then formed in a continuous profile. With this process, various products can be manufactured such as pipe/tubing, window frames, weather stripping, wire insulation...

Samedi 16 avril 2022

The solid state frequency converter adopts a relatively sealed structure, and the protection level can reach IP55. This solid state frequency converter is a high frequency to low frequency converter. The high to low frequency converter application is very extensive. This solid state...

Mardi 12 avril 2022

The flame cutting machine is a multifunctional thermal auto-cutting device combined microcomputer controlling, precise machinery and oxygen-acetylene gas cutting. Its CNC cutting torch can cut plates in an arbitrary shape. Several cutting torches that are used to cut strips are fixed...

Mardi 12 avril 2022

Prix : 100USD

What is exothermic welding supplies Exothermic welding, also called hot melt welding, fire-clay welding, thermite welding and explosion welding, is a high-heat principle that utilizes the redox reaction between metals, the operation of which is simple, easy to learn, safe and efficient...

Mardi 12 avril 2022

CNG Production Process Unit Rich methane gas meets with rich gas ethane reheated by cooling heat exchanger, this steam of gas flows through the CNG processing compressor to increase pressure to 25Mpag, CNG plant product can be obtained. The compressor skid adopts motor drive, and...

Jeudi 17 mars 2022

The sanitary napkin sealing machine produced by Soontrue Machinery have a compact structure and good stability. They can conduct simple and uncomplicated operation. The system of our sanitary napkin packing machine is efficient and reliable. The maintenance of this tissue packing...

Jeudi 10 mars 2022

Quantité : 30-40sets/ - Prix : USD3000-200000

Gas & Water assisted injection molding Since the thermal conductivity and heat capacity of water are much bigger than nitrogen, so the injection cycle of water-assisted is about 70% shorter than the injection cycle of gas-assisted molding; The product wall thickness of water-assisted...

Jeudi 10 mars 2022

Quantité : 30-40sets/ - Prix : USD3000-200000

Types of Runners in Injection Moulding Generally, the temperature-sensitive wire is composed of steel wire insulated with a heat-sensitive material, the temperature sensing wire is commonly known as the "thermocouple", and there are many types, but hot runner thermocouple has two types...

Jeudi 10 mars 2022

10G SFP+ DWDM GrenTech 10g dwdm sfp+ uses a C-band fixed wavelength (100GHz or 50GHz) cooled EML laser, with a PIN (40km) or APD (80km) receiver. It supports 10GE and OTN OTU2e standards and is compatible with SONET/SDH and 10G Fiber Channel. Contact GrenTech for more 10g dwdm sfp+ transceivers...

Mercredi 09 mars 2022

Prix : 100USD

Two shot molding, also called double shot moulding, dual shot injection molding，multi shot injection molding or 2k injection moulding is one category of injection molding using two different thermoplastic materials to produce injection molded parts in two colors or two components...

Mardi 08 mars 2022

A multi cavity mold is known as a mould with multiple cavities. The multi-cavity mold consists of a multi-cavity of different plastic parts. Though multi-cavity plastic injection molding process may be much more complex than others such as insert injection molding process, it is still...

Mardi 08 mars 2022

This flamingo cake mold is non-stick and easy to detachable feature makes it the perfect molded tray for baking cakes, cupcakes, muffins, ice cream, chocolate,cookie and pudding. Technical Details of Flamingo Silicone Cake Mold This flamingo cake pan mold has different kinds of shapes...

Mardi 08 mars 2022

H10 Steel ASTM/AISI specification classifies chromium hot work tool steels as group H steels, ranging from H10, H11, H12 to H19. AISI H10 tool steel is one of chromium hot working tool steels. Chemical properties of H10 Steel Steel Grade Application of H10 Steel Hot punch, hot forging die...

Dimanche 27 février 2022

Prix : 1000-6000USD

As a professional oil immersed transformer factory our oil immersed transformers are specially developed and designed based on the advanced technology abroad for rough mountainous topography and transportation difficulties to meet the requirement of China Grid. The main characters...

Jeudi 24 février 2022

It is a new product developed in the world in recent 50 years, which is closely related to today's high technology. It has the properties of high-temperature resistance, corrosion resistance, high strength, good conductivity, and thermal conductivity, self-lubrication, low coefficient...

Dimanche 20 février 2022

Quantité : 5000pcs ea - Prix : USD 1.00 to USD 500.

As one of garden floor spotlights, AE01 eagle spot light can be used as lighting up and down. Dimming of garden ground spotlights is available between 3W and 12W. The Angle of the eagle spot light is a kind of new garden lights and the outdoor garden lighting fixtures can be changed...

Dimanche 20 février 2022

Quantité : 20,000 ton - Prix : $850~$2000 / ton

Sand casting is the most commonly applied method for casting the metal part. It suits most of the raw materials, ferroalloy, and non-ferroalloy both can be used to do the sand casting. Sand casting is able to produce the part varying from several gram weight to dozens of tons, or...

Samedi 19 février 2022

Quantité : ＜20pcs - Prix : 10-300$

As one of the mature CNC components manufacturers in China, HYCNC can provide various CNC router parts including spindle motors, CNC controllers, AC motor drivers, linear motion parts, servo motors and drivers. Our CNC Machines are extensively applicable in many areas of mechanical processing...

Samedi 19 février 2022

Quantité : ＜20pcs - Prix : 10-300$

As one of the mature CNC components manufacturers in China, HYCNC can provide various CNC router parts including spindle motors, CNC controllers, AC motor drivers, linear motion parts, servo motors and drivers. Our CNC Machines are extensively applicable in many areas of mechanical processing...

Dimanche 23 janvier 2022

CLT-T100L is an extension model based on CLT-T100 professional coffee and hot chocolate machine, equipped with big hoppers, big waste container as base, water supply system and milk cooler; Big hoppers: Expand coffee bean container capacity from 550g to 1500g, and expand the chocolate...

Vendredi 07 janvier 2022

Quantité : 500 units/ - Prix : 28,000-300,000USD/un

Founded in 1993, Shanghai Soontrue is an international professional packing machine manufacturer, which involved in R&D, manufacturing, sales and some other services. With establishment fund 5 million dollars, Soontrue has become a bigger and stronger group by the supporting of...