2000~2250LM - 6163 Annonces

Mercredi 22 avril 2015

Main technical data of Hydrogen vacuum sintering furnace Model Effective working Dimension (mm) Max temperature (℃) Ultimate pressure (pa) Pressure rising rate(pa/h) IF power (KW) IF voltage (V) IF Frequency (HZ) Temperature Uniformity(℃) RHIS-160 350×500 2400 10-1 0.67...

Mercredi 22 avril 2015

Main technical data of Ultra high temperature vacuum induction furnace Model Effective working dimension mm(Φ×H) Max temperature(℃) Ultimate pressure (Pa) Pressure rising rate (Pa/h) IF power (KW) IF frequency (HZ) Temperature Uniformity (℃) RVIS-160 500×800...

Mercredi 22 avril 2015

Main technical data of Horizontal vacuum induction furnace Model Effective working dimension mm(H×W×L) Max temperature (℃) Ultimate pressure (Pa) Pressure rising rate (Pa/h) IF power (KW) IF frequency (HZ) Temperature Uniformity (℃) RVIS-160W 400×400×800 2550...

Mercredi 22 avril 2015

Main technical data of Vacuum silicon carbide sintering furnace Model Effective working dimension mm(Φ×H) Max temperature (℃) Ultimate pressure (Pa) Pressure rising rate (Pa/h) IF power (KW) IF frequency (HZ) Temperature Uniformity (℃) RHIS-160 500×800 2400 7×10-1 1...

Mercredi 22 avril 2015

Application The aluminum conductor alloy reinforced (ACAR) is an excellent conductor choice where current carrying capacity, higher strength and a lower conductor weight are critical to the line design. Property - improved strength to weight ratio - better mechanical properties...

Dimanche 19 avril 2015

Quantité : 100 units - Prix : Negotiable

Hitop est un ISO 9001: 2000 certifié fabricant de moules, privée avec une usine ultra-of-the-art production en Chine. Hitop vous donne les avantages de la baisse des coûts couplés aux normes d'ingénierie et de production élevées attendues dans la européen et nord-américain. La...

Jeudi 16 avril 2015

Quantité : 1set - Prix : 34 400,00 €

- Specifications - 1.Twin Screw and Atomizing System; 2.The Filling Seal For Ends of Shaft to Improve Tightness and Prevent From Leakage. 1. The mixing chamber is constituted by twin screw and atomizing system. The filling seal is adopted for ends of shaft to improve tightness...

Jeudi 16 avril 2015

Quantité : 1set - Prix : 30 400,00 €

- Specifications - 1.Suitable For Feed Factory And Especially For Fertilizer Factory; 2.Mixing Time Is 1-3 Minutes.The Homogenity Can Reach 10%. 1. It is suitable for feed factory and fertilizer factory, the best choice for fertilizer factory; < br /> 2. The mixing time is 1-3 minutes...

Jeudi 16 avril 2015

Quantité : 1set - Prix : 46400rmb

- Specifications - 1.Suitable For Feed Factory And Especially For Fertilizer Factory; 2.Mixing Time Is 1-3 Minutes.The Homogenity Can Reach 10%. 1. It is suitable for feed factory and fertilizer factory, the best choice for fertilizer factory; < br /> 2. The mixing time is 30-120s...

Jeudi 16 avril 2015

Quantité : 1set - Prix : 46400rmb

- Specifications - 1.Suitable For Feed Factory And Especially For Fertilizer Factory; 2.Mixing Time Is 1-3 Minutes.The Homogenity Can Reach 10%. 1. It is suitable for feed factory and fertilizer factory, the best choice for fertilizer factory; < br /> 2. The mixing time is 30-120s...

Mercredi 15 avril 2015

Specification: Technical code for testing of building foundation piles JGJ 106-2003 Technical specification of Dynamic pile tests for Highway Engineering JTG/TF81-01-2004 Technical specification for inspection of concrete defects by ultrasonic method CECS21: 2000 Technical specification...

Mercredi 15 avril 2015

Specification Technology specification for inspection of concrete defects by ultrasonic method CECS 21: 2000 Technical specification for detecting strength of concrete by ultrasonic-rebound combine method CECS 02: 2005 Purpose Testing building foundation piles by crosshole ultrasonic...

Mercredi 15 avril 2015

Executive Standard: Standard for test methods of long-term performance and durability of ordinary concrete（GB/T50082-2009） The Provisional Technical conditions of Passenger special line high-performance concrete Corrosion prevention technical specification for concrete structure...

Mardi 14 avril 2015

Quantité : 20 tons/da - Prix : 10-14usd/kg

Specification of Medical Grade liquid silicone rubber for shoe insoles - Food grade - Medical grade - High tear strength - Fast curing time - High translucent Medical Grade liquid silicone rubber for shoe insoles Application of Medical Grade liquid silicone rubber for shoe insoles...

Mardi 14 avril 2015

Quantité : 100 units - Prix : negotiable

Hitop is an ISO 9001: 2000 certified, privately owned mold manufacturer with a state-of-the-art production plant in China. Hitop gives you the benefits of lower costs coupled with the high engineering and production standar ds expected in the European and North American. The ability...

Mardi 14 avril 2015

Quantité : 100 units - Prix : Negotiable

Hitop is an ISO 9001: 2000 certified, privately owned mold manufacturer with a state-of-the-art production plant in China. Hitop gives you the benefits of lower costs coupled with the high engineering and production standar ds expected in the European and North American. The ability...

Mardi 14 avril 2015

- Place of Origin: Guangdong, China (Mainland) - Brand Name: UFO/OEM - Model Number: 12v 110ah - Type: Li-polymer - Nominal Voltage: 12V - Size: Prismatic - Nominal Capacity: 110ah - voltage: 12V - capacity: 110ah - shape: prismatic - material: li - application...

Mardi 14 avril 2015

Quantité : 10 - Prix : 34800 dollar

Cummins Marin moteur de propulsion KTA19-351kw@1800rpm fabriqué par cummins chine joint-venture usine CCEC (Chongqin Cummins Engine Company) Gamme de Moteur : KTA19-M(470HP) Type de Moteur: 6 Cylindres, en Ligne Déplacement : 19 L Vitesse Nominale: 1800 rpm Puissance Nominale...

Dimanche 12 avril 2015

2, sand making machine at work 400 hours should be the addition of appropriate amount of grease, to work 2000 hours to open the spindle assembly bearing cleaning, if the work until 7200 hours when it must be replaced with new bearings.2, sand making machine at work 400 hours should...

Dimanche 12 avril 2015

In the calculation of feed particle size, is open side of maximum size of feed inlet multiplied by 0.85 dimensions as the basis for the selection of the feeding, while the average size of the product is divided by the maximum feed crushing ratio.In the calculation of feed particle size...

Samedi 11 avril 2015

Established in 2000, Sigma CNC Technology Machinery Co., Ltd. is a newly emerged manufacturer of various Machining Centers, such as Double Column Machining Center, Five Face Machining Center, Moving Column Horizontal Machining Center and so on. Despite that Sigma CNC is a young company...

Vendredi 10 avril 2015

Quantité : 100

Shenzhen CBD Furniture Group was founded in 1993. CBD is mainly engaged in the research, development,production,sale and related services of upholstered beds,sofas,mattresses,bedding. As a largest enterprise in the Chinese bedding industry.CBD has more than 500 staff-owned design...

Jeudi 09 avril 2015

Quantité : 2000 - Prix : 10-15 usd/kg

1. Description -Liquid platinum cure silicone rubber for adult women toys making Liquid platinum cure silicone rubber for adult women toys making is generally named two-componen ts silicone rubber, Part A and part B. It features an exceptional fluidity and good operability. The...

Jeudi 09 avril 2015

Quantité : 2000 - Prix : 10-15 usd/kg

1. Description -Liquid platinum cure silicone rubber for adult women toys making Liquid platinum cure silicone rubber for adult women toys making is generally named two-componen ts silicone rubber, Part A and part B. It features an exceptional fluidity and good operability. The...

Jeudi 09 avril 2015

Quantité : 2000 - Prix : 10-15 usd/kg

1. Description -Liquid platinum cure silicone rubber for adult women toys making Liquid platinum cure silicone rubber for adult women toys making is generally named two-componen ts silicone rubber, Part A and part B. It features an exceptional fluidity and good operability. The...

Jeudi 09 avril 2015

Quantité : 8 tons/day - Prix : 10-14usd/kg

Specification of Medical Grade liquid silicone rubber for shoe insoles - Food grade - Medical grade - High tear strength - Fast curing time - High translucent Application of Medical Grade liquid silicone rubber for shoe insoles The product is a two component high elongation...

Jeudi 09 avril 2015

Quantité : 100 grams - Prix : 10USD

RTV Silicone Rubber Applications: RTV Silicone Rubber is great to make poly resin crafts, PU crafts, PU resin crafts, gypsum crafts, u nsaturated resin crafts, lighting and candles crafts, plastic toy, stationery gifts crafts industry, RTV Silicone Rubber Advantages: light viscosity...

Mercredi 08 avril 2015

Quantité : 2000 - Prix : 6-9usd/kg

Application of rtv liquid moulding silicone rubber : liquid molding casting silicone rubber is mainly applied for making various molds,such as reproducti on of poly resin, epoxy, polyurethane-polymer, plaster, gypsum casting and moulding, soaps, candle & lighting, architecture...

Mercredi 08 avril 2015

Quantité : 100 grams - Prix : 10USD

Food Grade Silicone Rubber Description Food grade silicone rubber It have FDA Certificate and excellent for high-detail cake molds and comp lex design. Also it very suitable for making ice trays molds , baking molds,casting butter and other application you can image to produce foods...

Mercredi 08 avril 2015

Quantité : 2000 - Prix : 6-9usd/kg

Application of rtv liquid moulding silicone rubber : liquid molding casting silicone rubber is mainly applied for making various molds,such as reproducti on of poly resin, epoxy, polyurethane-polymer, plaster, gypsum casting and moulding, soaps, candle & lighting, architecture...