INSTALLED - 5225 Annonces

Jeudi 23 avril 2015

JZP2H is roots and rotary piston vacuum pump system. The unit used in transformer, coating, smelting, heat treatment, drying, distillation, such as aviation simulation test. Roots and Rotary piston vacuum pump system has a remarkable energy saving effect. It has very fast pumping...

Mercredi 22 avril 2015

Product Information Vacuum and Dosing System Omel and Vacuum Systems Omel, besides the liquid ring vacuum pumps, manufactures vacuum systems for specific applications. Those systems are specially designed for the severe conditions demanded by several industrial processes. Omel, besides...

Mercredi 22 avril 2015

Application The assembled insulated conductor shall be suitable for use in a system having a standard operating voltage not exceeding 600/1000V. The cores of an aerial bundled conductor shall be laid-up with a left-hand lay. The length of lay shall be 55-75 times the diameter of...

Mardi 21 avril 2015

Application Covered line Wire is used primarily for overhead secondary distribution lines. It is not an electrically insulated conductor and is treated as bare conductor when installed. The code words as given apply to conventional polyethylene line wire. Property Operation Temperature...

Dimanche 19 avril 2015

Application Medium voltage UD-P suitable for Primary underground Distribution System; buried directly or installed in underground ducts or conduits or exposed to sunlight for above ground application. To be used a 15,000 volts or less. Rated for continuous operation at 90℃ conductor...

Samedi 18 avril 2015

Application： These cables are intended for drawing into trunking andfixed, protectedconduit. They may also be used inside installations such as lighting fittings, appliances, switchgear andcontrolgear, which are to be used in normal temperature zones. Property: LSOH cables are...

Samedi 18 avril 2015

Application Directly buried or installed in ducts for 600 volt secondary distribution. ·Cable in Duct(CIC) ·Abrasion Resistant Specification 1. Standards：ASTM B-230, B-231 and ICEA S-66-524, UL Standard 854 for type USE 2. Construction: Concentric stranded or compressed 1350-H19...

Samedi 18 avril 2015

Application With the characteristics of stable capability, advanced technology, broad material resources, low price, good flexible and easy to lay and maintain, the PVC Insulated and Sheathed Power Cable are suitable to be laid for distribution line with A.C.50HZ and rated voltage up to 1kV...

Mardi 14 avril 2015

Li Battery Advantage: Product Features: High Energy Density High Power Density Tailored Size Superior Safety Performance Low Internal Resistance Superior Cycle Performance High Discharge Platform Advantages: 1.High energy density 2.High working voltage for single battery cells 3...

Vendredi 10 avril 2015

FST800-220 industrial pressure transmitter is sealed with the standard 2088 shell and is a silicon MEMS strain gauge sensor which is glass bonded to a stainless steel diaphragm. It avoids influences on product caused by temperature, humidity, mechanical fatigue and medium, thus to...

Vendredi 10 avril 2015

FST800-216 high-temperature pressure transmitter is a silicon MEMS strain gauge sensor which is glass bonded to a stainless steel diaphragm. It avoids influences on product caused by temperature, humidity, mechanical fatigue and medium, thus to improve its longterm stability in the...

Vendredi 10 avril 2015

FST800-215 explosion-isolated pressure transmitter is a silicon MEMS strain gauge sensor which is glass bonded to a stainless steel diaphragm. It avoids influences on product caused by temperature, humidity, mechanical fatigue and medium, thus to improve its longterm stability in...

Vendredi 10 avril 2015

FST800-214 intrinsic-safety pressure transmitter is a silicon MEMS strain gauge sensor which is glass bonded to a stainless steel diaphragm. It avoids influences on product caused by temperature, humidity, mechanical fatigue and medium, thus to improve its longterm stability in the...

Jeudi 09 avril 2015

DY-TMAL-I/II Cette machine est utilisée pour le marquage à longue distance. Elle doit être installée au camion dans la position correspondante avec le support du pistolet de spray, la tige de guide et l'encodeur. - Données techniques - Type DY-TMAL-I DY-TMAL-II A B A B Moteur...

Jeudi 02 avril 2015

China Mining Equipment Co., Ltd takes the differentiation of product as a long plan for the future of the development of an enterprise, and seeks for new market demands and builds new economic growth pole in order to realize the sustainable development of an enterprise. dryer machine...

Vendredi 27 mars 2015

Hanron Lighting Co. Limited's SMD3528 LED Flexible Strip Light, 60LED/Meter, waterproof &non-waterproof, 9.6W/M, 6-7lm/LED, 30,000hrs lifetime. Features: 1. TOP SMD3528 chip, high brightness, wide beam angle, low decay. 2. Easy to install for any bending 3. Low power consumption...

Vendredi 27 mars 2015

Hanron Lighting Co. Limited's SMD2835 LED Flexible Strip Lighting, 60LED/Meter, waterproof &non-waterproof, 14.4W/M, 22-24lm/LED, 30,000hrs lifetime. Features: 1. TOP SMD2835 chip, high brightness, wide beam angle, low decay. 2. Easy to install for any bending 3. Low power consumption...

Vendredi 27 mars 2015

Hanron Lighting Co. Limited's SMD5050 LED Flexible Strip Lighting, 30LED/Meter, waterproof &non-waterproof, 7.2W/M, 18-20lm/LED, 30,000hrs lifetime. Features: 1. TOP SMD5050 chip, high brightness, wide beam angle, low decay. 2. Easy to install for any bending 3. Low power consumption...

Jeudi 26 mars 2015

1. Fast drying performance of tumble dryer machine 2. Micro processor control. temperature control and over-temperature protection device installed. 3. Durable stainless steel drum , prevent the fabric from pollution, anti-corrosion. 4. Concentrated airflow and sealed drum ensure...

Jeudi 19 mars 2015

Specifications Rubber Speed Bump 1. Model: GY-SP-1 2. Size: main 500*600*50mm side 200*600*50mm (L*W*H) 3. Weight: 14kg/main,9kg/side Rubber Speed Bump 1. Model: GY-SP-1 2. Size: main 500*600*50mm side 200*600*50mm (L*W*H) 3. Weight: 14kg/main,9kg/side Rubber Speed Hump Characteristics...

Lundi 16 mars 2015

Forever SIPs is an incredible framing alternative to traditional brick or lumber. Builders are saving construction time and money. It is sandwich panel with skin board and insulation core. There are three boards available for skin, they are: Magnesium Oxide board (MGO board), Fiber...

Lundi 16 mars 2015

Forever SIPs is an incredible framing alternative to traditional brick or lumber. Builders are saving construction time and money. It is sandwich panel with skin board and insulation core. There are three boards available for skin, they are: Magnesium Oxide board (MGO board), Fiber...

Lundi 16 mars 2015

Forever SIPs is an incredible framing alternative to traditional brick or lumber. Builders are saving construction time and money. It is sandwich panel with skin board and insulation core. There are three boards available for skin, they are: Magnesium Oxide board (MGO board), Fiber...

Lundi 09 mars 2015

FST800-214 intrinsic-safety pressure transmitter is a silicon MEMS strain gauge sensor which is glass bonded to a stainless steel diaphragm. It avoids influences on product caused by temperature, humidity, mechanical fatigue and medium, thus to improve its longterm stability in the...

Lundi 09 mars 2015

FST800-215 explosion-isolated pressure transmitter is a silicon MEMS strain gauge sensor which is glass bonded to a stainless steel diaphragm. It avoids influences on product caused by temperature, humidity, mechanical fatigue and medium, thus to improve its longterm stability in...

Lundi 09 mars 2015

FST800-216 high-temperature pressure transmitter is a silicon MEMS strain gauge sensor which is glass bonded to a stainless steel diaphragm. It avoids influences on product caused by temperature, humidity, mechanical fatigue and medium, thus to improve its longterm stability in the...

Lundi 09 mars 2015

MB510 Differential PressureTransmitter Features  316L stainless steel construction, compact size, easy installation;  Laser welding, full-sealed construction; Protection IP67;  High precision, wider temperature compensate range;  Anti-impact, anti-vibration, anti-overloading...

Samedi 07 février 2015

Description： Glass wool blanket, with thin and long inner fiber,once installed, the high performance insulation blanket will not off-gas formaldehyde in the indoor environment and acts as a highly effective barrier to heat flow, keeping your building cool during hot weather and conserving...

Vendredi 30 janvier 2015

New Products Alert >>> 2015 Chevrolet CRUZE Parts and Accessories SZGMYA81094 2015 Chevrolet Cruze Rear Bumper Chrome Trim SZGMYA74004 2015 Chevrolet Cruze Engine Cowl Hood Molding Trim SZGMFS67058 2015 Chevrolet Cruze Car Body Side Moulding SZGMEA84046 2015 Chevrolet...

Jeudi 29 janvier 2015

Quantité : 1 set - Prix : EXW USD670 per set,

APPLICATION AND PROPERTIES: 1.Plastic injection mold temperature controller is mainly applied for heating and maintaining the temperature of mould,and is also applicable for fields of same demands. 2.It adopts most advanced microcomputer control principle with precise electronic...