PERFORMANCES - 17892 Annonces

Mardi 08 août 2023

Quantité : 10 million - Prix : 0.4-1.2 usd per sqm

VHB foam tape stands for very high bonding foam tape. It is also called acrylic foam tape. Because it has very high bonding features. Thus, it can be excellent alternatives of metal fasteners and liquid adhesives. For example, it can used for mounting glass curtain walls and doors...

Mardi 08 août 2023

Quantité : 10 million - Prix : 0.4-1.2 usd per sqm

Polyethylene fiber mesh laminated with foil is very popular in HVAC industry. It can used for wrapping the air ducts and laminating the glass wool or rock wool thermal insulation, duct board joints applications. It can be either easy tear or hard tear as per customers requirements...

Mardi 08 août 2023

Quantité : 10 million - Prix : 0.4-1.2 usd per sqm

Industrial felt is made of wool which is machined and bonded (non-weft and warp interwoven). The main features are as follows: Elastic, can be used as shockproof, sealing, gasket and elastic wire needle cloth bottom felt material. Good bonding performance, not easy to loose, can...

Mardi 08 août 2023

Quantité : 10 million - Prix : 0.4-1.2 usd per sqm

Egret series refrigeration ball valve is a manually regulated shut-off valve, which is applicable to two-direction flow. It is used on the liquid, air suction, and hot vapor piping of the freezer, cold store, and air conditioning unit. The valve seat is well sealed with perfect...

Mardi 08 août 2023

Quantité : 10 million - Prix : 0.4-1.2 usd per sqm

Egret so-called pvc pipe wrap tape is used a lot for wrapping air ducts, so it is also called PVC pipe wrap tape. Important to realize, the main difference with non adhesive pvc tape is about the glue. The base material is pure PVC resin, and coated with aggressive synthetic rubber adhesive...

Mardi 08 août 2023

Shine i1910 is a fully automatic and simple-to-use benchtop chemiluminescence immunoassay analyzer with a throughput of 120 tests per hour. Based on various modes of antigen-antibody immunoreactivity and with paramagnetic particles as a carrier, i1910 utilizes the indirect chemiluminescence...

Mardi 08 août 2023

coxsackievirus diagnosis diagnosis of coxsackievirus coxsackievirus rna Coxsackievirus A6 is a positive-strand RNA virus that may cause Hand-foot-mouth disease (HFMD), herpes pharyngitis and demodicosis, etc. This HFMD test kit is a real-time (rt) reverse transcriptase (RT) polymerase...

Mardi 08 août 2023

Tesoo provides premium quality cctv camera wide angle lens with excellent reliability and performance, which can be used under extreme environment. Part of the wide angle lenses are warmly welcomed by vehicle applications, which can work stablely under -40℃~+105℃. Tesoo has various...

Mardi 08 août 2023

The ball valve is composed of a valve body and a bonnet. It is called a two-piece type. The one-piece type is an integrated structure. The two-piece ball valve has improved the one-piece valve with less flow and is easy to leak. The gland is added to prevent leakage. Nominal pressure: 1...

Mardi 08 août 2023

As the most commonly used fabric for adhesive fabric bandages, flexible fabric is really versatile. As the adhesive bandage material, the fabric is not only reasonably priced but also has stable functions. Flexible fabric stretch and flexes as you move,fabric adhesive bandage has...

Mardi 08 août 2023

Prix : 2.8-3.2USD

What is plastic injection molding? Plastic Injection molding is a molding method that combines injection and molding. The advantages of plastic small scale injection molding method are fast production speed, high efficiency, operation can be automated, variety of colors, shapes can...

Mardi 08 août 2023

Prix : 2.8-3.2USD

What materials are used in injection moulding? Materials used in injection moulding generally include abs molding, nylon injection molding, polycarbonate injection molding, PP injection molding, PVC injection molding, HDPE injection molding, and so on. Feel free to check out the injection...

Mardi 08 août 2023

Prix : 2.8-3.2USD

Plastic Injection Molding Plastic Injection Molding Plastic injection moulding is a method of making plastic products. The molten plastic is injected into the mold by pressure, and then cooled and molded to obtain various plastic parts. There are mechanical injection molding machines...

Mardi 08 août 2023

A led filament bulb china is an LED lamp that mimics a typical incandescent light bulb with visible filaments for aesthetic and lighting distribution reasons while utilizing light-emitting diodes, which have a high efficiency (LEDs). As one of the leading LED filament bulb suppliers...

Mardi 08 août 2023

TFT LCD is an abbreviation of thin film transistor LCD, Zhunyi Technology china tft lcd module covered 0.96 inches to 15.6 inches. Screen resolution from 80*160 to 1920*1200.china tft module included round, bar, square, 4: 3, 16: 9, and other shapes. Optional interfaces are SPI...

Mardi 08 août 2023

Touch type: Capacitive or resistive Welcome to our comprehensive guide on square TFT LCD display screens! If you're in search of a reliable supplier for your Square TFT screen module needs, you've made a great choice. We specialize in offering a wide range of square TFT display modules...

Mardi 08 août 2023

Single layer to 12 flex pcb layers manufacturing service. Different stiffener materials: Fr4, PI, Aluminum, different flex materials such as Doupont, Panasonic etc are available. A flexible board is made of flexible insulating material, which has many advantages that a rigid printed...

Mardi 08 août 2023

We can provide you with up to 64 layers, 12oz copper, HDI, high frequency, high TG, flex, MC pcb from prototype to mass production. As a rigid pcb manufacturer, Fastlink Electronics offers the highest quality printed circuit boards at the most competitive pricing. Whether you need...

Mardi 08 août 2023

Switch, Router, Line Card, Antenna The upstream industry of electronic communication products is mainly electronic component manufacturing, the middle is communication equipment manufacturing and telecom operation services, and the downstream is the government, public utilities,...

Mardi 08 août 2023

We provide services for turnkey PCB production. We produced mixed panels with up to 50 designs combined in one gerber. To give you more options. We continually stock materials (even rare ones) to be ready to go when you are inneed. Rigid, rigid-flex, and flex boards are available...

Mardi 08 août 2023

Our DIP process workers are rich experienced with a variety of products. They can solder them very beautifully. Through hole assembly is used in many fields. The time and money required to complete an through hole mount PCB Assembly makes it especially popular for large equipment...

Mardi 08 août 2023

Most of Rogers 4003 Material, Rogers 4350 Material is available, Rogers 4003 PCB, Rogers RO3003C PCB, Rogers RO4350B PCB, Rogers RO5880 PCB, Rogers RO5870 PCB, etc. At rogers pcb manufacturer Fastlink Electronics, we combine state of the art technology with our advanced engineering...

Mardi 08 août 2023

On the mounted flap wheel for drill, the flap made of coated abrasive is arranged radially around the tool axis in a fan-shaped structure. Their flexibility enables them to fully adapt to the contour of the workpiece. Abrasive particles are embedded in a strong and flexible cloth...

Mardi 08 août 2023

The flexibility of 8 inch flap wheel enables them to fully adapt to the contour of the workpiece. Abrasive particles are embedded in a strong and flexible cloth backing material through a resin adhesive. Flap Wheel 3/8inch Specification: Diameter: 3/8 inch=10mm Max. RPM: 25000 RPM Raw Materials...

Mardi 08 août 2023

On the mounted abrasive flap wheel, the flap made of coated abrasive is arranged radially around the tool axis in a fan-shaped structure. Their flexibility enables them to fully adapt to the contour of the workpiece. Abrasive particles are embedded in a strong and flexible cloth backing...

Mardi 08 août 2023

On the Mounted Small Flap Wheel, the flap made of coated abrasive is arranged radially around the tool axis in a fan-shaped structure. Their flexibility enables them to fully adapt to the contour of the workpiece. Abrasive particles are embedded in a strong and flexible cloth backing...

Mardi 08 août 2023

On the Mounted Emery Flap Wheel, the flap made of coated abrasive is arranged radially around the tool axis in a fan-shaped structure. Their flexibility enables them to fully adapt to the contour of the workpiece. Abrasive particles are embedded in a strong and flexible cloth backing...

Mardi 08 août 2023

On the Mounted Flap Wheel, the flap made of coated abrasive is arranged radially around the tool axis in a fan-shaped structure. Their flexibility enables them to fully adapt to the contour of the workpiece. Abrasive particles are embedded in a strong and flexible cloth backing material...

Mardi 08 août 2023

On the mounted aluminium oxide flap wheel, the flap made of coated abrasive is arranged radially around the tool axis in a fan-shaped structure. Their flexibility enables them to fully adapt to the contour of the workpiece. Abrasive particles are embedded in a strong and flexible...

Mardi 08 août 2023

High Voltage Wiring Harness For Electric Vehicle is a necessary component of electric car and it should be used in accordance with the requirements of voltage and current. The main function of High Voltage Wiring Harness For Electric Vehicle is to ensure the safety of all people in...