BARS - 5364 Annonces

Mercredi 29 avril 2015

Prix : $10000-80000/set

Section Steel shot peening surface cleaning machine 1.ISO9001 CE 2.good service 3.high efficiency 4.OEM is acceped Section Steel shot peening surface cleaning machine Technique Parameter type QH698 QH6912 QH6915 QH6920 QH6925 QH6930 QH6940 effective cleaning width(mm) 800...

Mardi 28 avril 2015

Quantité : 100 - Prix : negotiation

sapphire rods Typical Applications: 1 laser guidance; 2 Laser Rods; 3 Plunger rod; 4 Insulator; 5 wearing surface; 6 pump; Technical Index: Surface roughness: Rz0.05 Surface quality: S/D40/20 Material: Sapphire,magnesium fluoride,germanium,silicon,quartz,optica l glasses and ect. Order...

Mardi 28 avril 2015

Quantité : 20 sets - Prix : 28 000,00 €

Tube Ice Machine Brife Introduction: ALLCOLD engineers designed the unique Tube-Ice Machine specifically to freeze ice automatically in vertical tubes, momentarily thaw ice loose from the tubes and then cut it into short cylinders with a hole in the center. The hole in the ice cube...

Mardi 28 avril 2015

Quantité : 20 sets - Prix : 28 000,00 €

Tube Ice Machine Brife Introduction: ALLCOLD engineers designed the unique Tube-Ice Machine specifically to freeze ice automatically in vertical tubes, momentarily thaw ice loose from the tubes and then cut it into short cylinders with a hole in the center. The hole in the ice cube...

Mardi 28 avril 2015

Quantité : 20 sets - Prix : 28 000,00 €

Tube Ice Machine Brife Introduction: ALLCOLD engineers designed the unique Tube-Ice Machine specifically to freeze ice automatically in vertical tubes, momentarily thaw ice loose from the tubes and then cut it into short cylinders with a hole in the center. The hole in the ice cube...

Mardi 28 avril 2015

Quantité : 20 sets - Prix : 28 000,00 €

Tube Ice Machine Brife Introduction: ALLCOLD engineers designed the unique Tube-Ice Machine specifically to freeze ice automatically in vertical tubes, momentarily thaw ice loose from the tubes and then cut it into short cylinders with a hole in the center. The hole in the ice cube...

Jeudi 23 avril 2015

Quantité : 300 pieces - Prix : 0,00 €

1.Material: High quality stainless steel AISI/SUS 304 and 316. 2.Size: 1)Steel solid bar's thickness: 5mm,6mm,8mm 2)Handrail Balustrade Height: 870mm,950mm,1050mm,1100mm,1200mm 3)Diameter of solid rods: 10mm,12mm, 14mm,16mm,19mm and so on 3.Function: Support handrails and hold solid rods...

Jeudi 23 avril 2015

It has high conductivity, visible light transmittance and mechanical semiconductor film hardness and good stability. Operational principle: Taking use of different target basement structure and different target materials, the machine will coat one or more layer of nano film on...

Jeudi 23 avril 2015

This equipment mainly used in drill bits, milling cutter, core shaft, blades, precision mould, cutting tools industry, etc. Operational principle: This equipment adopts the vacuum evaporation ion beam technology. This equipment can install two to six different pure metal or alloy...

Jeudi 23 avril 2015

Prix : USD1-10

Localisation : Room D,12F,First Trading Building,No.985 DongFang Rd, Pu-Dong, Shanghai, China, 200122 SHANGHAI, Personne à contacter : Moussa Hassane, 86 21 58921782

Mercredi 22 avril 2015

It is applied for vacuum quenching of high alloy steel such as high-speed tool steel,mould steel,gauge steel and cutlery steel.The machine can achieve in isothermal quenching & multi-grade quenching.With the function of convective heating,it can also be used as annealing and...

Mercredi 22 avril 2015

Main technical data of Vacuum carburizing furnace Model Effective working dimension (mm) Loading capacity (Kg) Max temperature (℃) Ultimate pressure (Pa0 Pressure rising rate (Pa/h0 Heating Power (Kw) Temperature uniformity (℃) Gas Cooling pressure (bar) WZST-223...))

Lundi 20 avril 2015

Quantité : 1000 - Prix : negotiation

sapphire and ruby rods/quartz rods Typical Applications: 1 Ultra-high pressure waterjet cutting; 2 Gas/liquid control switch; 3 Blood corpuscle analyzer; 4 ink-jet printing; 5 Flow Mete ; Details for reference: Surface roughness: Rz0.05 Material: Sapphire,magnesium fluoride,germanium...

Lundi 20 avril 2015

Quantité : 1000 - Prix : negotiation

sapphire bearing /RING TYPE JEWEL Bearings Typical Applications: 1 Ohmmeter; 2 Voltmeter; 3 Measuring instruments; 4 Compasses; 5 Timer; 6 Relays; Other Indicators Technical Index: Surface roughness: Rz0.05~Rz0.8 Material: Sapphire,magnesium fluoride,germanium,silicon,quartz,optica l...

Dimanche 19 avril 2015

Charger des appareils de retenue en ce qui concerne les poteauxd'étaiement exemple et poutres d'étayage, sont très utiles pour fixer leséléments. les titres sur les murs, le plancher et le toit, rendentpossible de positionner des poteaux et besms près ou même directementcontre les...

Dimanche 19 avril 2015

Nous sommes l'usine proessional les pièces de contrôle du fret Nous pouvons produire : 1. charger la cargaison barres/gardiens 2. délocalisation poutres/poteaux/barres 3. planches de cargaison 4. cliquet buckles 5. treuils 6. Accessoires matériels tels que les points d'ancrage...

Dimanche 19 avril 2015

Load restraint equipment as for example shoring poles and shoring beams, are very useful securing elements. tracks on the walls, floor and roof, make it possible to position poles and besms nearly or even directly against cargo sections. In addition, Echometal also offers products...

Samedi 18 avril 2015

Prix : USD2.50/pcs

10cm (W) x 4.5m (L) with the pad 10x18cm Compositions: elastic bandage, non-stick pad, closure clip and clamp bar Advantages: 1. Effective bleeding control 2. Firm fixing 3. Convenient operation 4. Multi-angle wrapping Technical information: 1. Highly absorbent pad that offers...

Mercredi 15 avril 2015

Purpose SYR51+ rebar Location system is used to test rebar diameter, distribution, coating thickness in concrete. Specification JGJ/T152-2008 Performance Longer service life of the Connector Clip: The instrument has long service life because of using Lemo Connector Clip which...

Mercredi 15 avril 2015

Quantité : Inquiry - Prix : USD 0.25-0.5/Watt

Dimensions : 156mm x 156mm ± 0.5mm. Thickness (Si): 180μm ± 20μm / 200μm ± 20μm. Front : Silver bus bars Silicon nitride anti-reflection coating. Back : Silver bus bars Full-surface aluminum BSF. Localisation : 5F,No.2.Sec.4.JhongyangRd,TuchengCity.Ta ipei County 236,Taiwan R.O...

Mercredi 15 avril 2015

Quantité : Inquiry - Prix : USD 0.8-1.5/piecs

Dimensions : 156mm x 156mm ± 0.5mm. Thickness (Si): 180μm ± 20μm / 200μm ± 20μm. Front : Silver bus bars Silicon nitride anti-reflection coating. Back : Silver bus bars Full-surface aluminum BSF. Localisation : 5F,No.2.Sec.4.JhongyangRd,TuchengCity.Ta ipei County 236,Taiwan R.O...

Mardi 14 avril 2015

Quantité : 20 tons/da - Prix : 11.98--16.28USD/KG

JA203# Polyurethane Resin Description JA203# polyurethane resin is a polymer material developed material， room temperature curing， two-com ponent, with low viscosity, small odor, soft, transparent glue. For it's good advantages of Wear res istance, yellowing resistance, UV resistance...

Lundi 13 avril 2015

Quantité : 1000 - Prix : negotiation

sapphire and ruby rods/quartz rods Typical Applications: 1 Ultra-high pressure waterjet cutting; 2 Gas/liquid control switch; 3 Blood corpuscle analyzer; 4 ink-jet printing; 5 Flow Mete ; Details for reference: Surface roughness: Rz0.05 Material: Sapphire,magnesium fluoride,germanium...

Lundi 13 avril 2015

Quantité : 1000 - Prix : negotiation

sapphire bearing /RING TYPE JEWEL Bearings Typical Applications: 1 Ohmmeter; 2 Voltmeter; 3 Measuring instruments; 4 Compasses; 5 Timer; 6 Relays; Other Indicators Technical Index: Surface roughness: Rz0.05~Rz0.8 Material: Sapphire,magnesium fluoride,germanium,silicon,quartz,optica l...

Lundi 13 avril 2015

Quantité : 1000 - Prix : negotiation

sapphire nozzles/jewel nozzles/ sapphire stylus-in Sen Hishi Sapphire / ruby nozzle and brass, copper, stainless steel, aluminum, etc. with a jacket fitted Typical Applications: 1 Ultra-high pressrue water jet cutting; 2 Blood corpuscle analyzer; 3 high pressure shower; 4 inkjet printing...

Lundi 13 avril 2015

Quantité : 10 - Prix : negotiation

screen printing machine for mugs/ single color printing This machine special on printing cylindrical products with diameter 110mm.And also can printing flat products. Feature: 1. Comprehensive function, can printing cylindrical, conical and great circle surface. 2. Per position is...

Lundi 13 avril 2015

Quantité : 10 - Prix : negotiation

automatic flat/cylindrical screen printing machine for cups, bottles in Upart This machine special on printing cylindrical products with diameter 110mm.And also can printing flat products. Feature: 1. Comprehensive function, can printing cylindrical, conical and great circle surface...

Lundi 13 avril 2015

Quantité : 10 - Prix : negotiation

flat/cylindrical screen printing machine for cups, bottles This machine special on printing cylindrical products with diameter 110mm.And also can printing flat products. Feature: 1. Comprehensive function, can printing cylindrical, conical and great circle surface. 2. Per position...

Jeudi 09 avril 2015

Quantité : 20 tons/da - Prix : 11.98--16.28USD/KG

JA203# Polyurethane Resin Description JA203# polyurethane resin is a polymer material developed material， room temperature curing， two-com ponent, with low viscosity, small odor, soft, transparent glue. For it's good advantages of Wear res istance, yellowing resistance, UV resistance...

Jeudi 09 avril 2015

Quantité : 100kgs - Prix : $20

Materia: Gr2,Gr5,Gr7,Gr9 Standard: AMST,AMS,ASME,BS,DIN,NF,GB,MIL,JIS,SAE Certificate: ISO9001: 2008,SGS Surface Treatment: Acid cleaning,Polished,Casting skin Color: Metal colour Features: 1.Low Density and High Specification Strength 2.Excellent Corrosion Resistance 3...