COMPLEX - 3298 Annonces

Vendredi 29 décembre 2023

Brass Non-standard Parts Brass is an alloy of copper and zinc. Brass consisting of copper and zinc is called common brass, which has high strength, high wear resistance and high hardness. The mechanical properties of cutting are also outstanding. That's why we brass cnc machining company...

Vendredi 29 décembre 2023

405nm is widely using in disinfection, bacterial disease cure,or microbial infection prevention etc. It does no harm to human. But it's blue not friendly for eye view. Feton LED chip model COB SW1919-40W-40FR90 emits this disinfection blue light as white. Lighting while disinfection...

Jeudi 28 décembre 2023

Compression Molding PEEK PEEK has excellent corrosion resistance, radiation resistance, high-temperature resistance, low-temperature resistance, hydrolysis resistance and good electrical properties, can be used under high temperature, high pressure and high radiation and other harsh...

Jeudi 28 décembre 2023

Polyetheretherketone PEEK for Medical Applications PEEK medical grade has good biocompatibility, non-toxicity, low density, and excellent mechanical properties. Its elastic modulus is very close to human bones. The peek medical material can be circularly disinfected by ethyl , steam thermal...

Jeudi 28 décembre 2023

Natural PEEK Plastic Applications PEEK polyetheretherketone raw material has excellent comprehensive properties and can replace traditional materials such as metals and ceramics in many special fields. PEEK has applications in mechanical engineering, aerospace, automotive industry...

Jeudi 28 décembre 2023

PEEK is a C-level insulating material, keeps excellent insulating properties under high temperature, high pressure, high humidity and other environments, has wave permeability, dimensional stability and self-lubrication, keeps lower dielectric dissipation factor under various frequencies...

Jeudi 28 décembre 2023

Auto Part Mold With the vigorous development of the automotive industry, plastic auto part mold is also developing rapidly. 90% of auto parts are produced by injection molds, which is a huge market opportunity for plastic auto plastic parts manufacturers. Common large-size auto parts...

Jeudi 28 décembre 2023

Aluminum Die Casting Mold When working at high or low temperatures, they also maintain good mechanical properties and have good corrosion resistance. properties and antioxidant properties. Die castings are widely used in construction, hardware, equipment, machine tools, ships, aerospace...

Jeudi 28 décembre 2023

MIM China is a repeatable process for complex components made from high-temperature alloys. MIM parts are near fully dense, which provides excellent mechanical, magnetic, corrosion, and hermetic sealing properties, and allows secondary operations like plating, heat treating, and...

Jeudi 28 décembre 2023

MIM stand for Metal Injection Molding, it's a forming method of a metal parts and can provide a nearly unlimited shape, geometric-feature capability, high-production rates through the use of multi-cavity tooling. Compared with conventional technology like press sintered and CNC, MIM...

Jeudi 28 décembre 2023

MIM stand for Metal Injection Molding, it's a forming method of a metal parts and can provide a nearly unlimited shape, geometric-feature capability, high-production rates through the use of multi-cavity tooling. Compared with conventional technology like press sintered and CNC, MIM...

Jeudi 28 décembre 2023

CNC milling processing is suitable for precision and complex parts processing, periodically repeated production parts processing, multi-station, multi-process concentrated part processing. The main processing objects are box parts, complex curved parts, special-shaped parts and discs...

Jeudi 28 décembre 2023

Spinning in sheet metal belongs to the processing of local continuity, the instantaneous deformation zone is small, and the total deformation force is small. Some parts with complex shapes or materials that are difficult to deform are difficult or even impossible to process with...

Vendredi 15 décembre 2023

L'exposition internationale sur la sécurité d'urgence IESE 2024 en Chine (Guangzhou) se tiendra au complexe de la foire de Canton de Chine (Guangzhou) (zone B) IESE est un salon influent de l'industrie des urgences en Chine qui crée une plate-forme permettant aux plus grandes sociétés...

Vendredi 15 décembre 2023

A connector mold, also known as a connector tooling, is a type of injection mold that is specifically designed to produce connectors or cable assembly components. Connectors are widely used in different industries, such as telecommunications, automotive, consumer electronics, and many others...

Mardi 12 décembre 2023

Mid motor is mounted on the frame where the pedal crank is. Mid motor are far more complex than hub motors, which also cost too much. The major advantage of the mid-motor drive is the mechanical characteristics offered by the gears. Mid-motor bikes could clearly outperform hub motor...

Samedi 09 décembre 2023

Quantité : 500000piec - Prix : 0-100000USD/piece

The differential hall effect sensor is made according to the principle of the Hall effect, and the Ampere's law is applied at the same time,that is, a magnetic field proportional to the current is generated around the current-carrying conductor, and the hall effect current measurement...

Samedi 09 décembre 2023

Quantité : 500000piec - Prix : 0-100000USD/piece

ACREL AHKC-EKA OPEN-LOOP HALL EFFECT TRANSDUCER (SPLIT-CORE) AHKC-EKA series open-type Hall current sensor is a new generation of current sensor developed by applying the principle of Hall effect. It can measure DC, AC, pulse and various irregular waveform currents under electrical...

Samedi 09 décembre 2023

Building decoration materials, also known as building finishing materials, refer to the materials laid or painted on the surface of buildings to decorate and beautify the environment. Building decoration materials are the important material basis of building decoration engineering...

Vendredi 08 décembre 2023

Quantité : 700ton/mon - Prix : USD3000-USD10000/ton

Biodegradable Straw Advantages The incision is smooth without burrs. Oblique design, easy to puncture the parafilm. 100% Biodegradable PLA straw can withstand 75°C. Individually packaged, clean, and hygienic. Why Choose Wholesale PLA Straws from Easy Joint? You can comfortably enjoy...

Mardi 05 décembre 2023

This is the Brass CNC Lathing Parts recently produced by us. It meets the requirements of ISO9001: 2008. Specification: 44mm*44mm Raw material: AL6061-T6 Surface Treatment: clear anodizing Finish: anodizing Specifications of brass precision parts Our strengths 1. Quick reply: DF will...

Mardi 05 décembre 2023

This is the High Precision 5axis CNC Machining, CNC Turning Mechanical Component recently produced by us. It meets the requirements of ISO9001: 2008. Specification: 46mm*45mm Raw material: AL6061-T6 Surface Treatment: clear anodizing Finish: anodizing Benefits of five-axis machining...

Mardi 05 décembre 2023

This is the Slide milling Nissan juke turning service enclosure machining machined aluminum motorcycle auto spare parts recently produced by us. It meets the requirements of ISO9001: 2008. Specification: 68mm*86mm Raw material: AL6061-T6 Surface Treatment: clear anodizing Finish:...

Mardi 05 décembre 2023

Quantité : 200sets-10 - Prix : $60~$20,000

Low Voltage Inverter MICNO series low voltage ac inverter has excellent performance and rich function and is reliable and easy to use with complete specifications. The low voltage VFD is widely used in more than 80 countries abroad in various application fields and is generally recognized...

Mardi 05 décembre 2023

Quantité : 5000 units - Prix : 8-2 million

NDT Application: Eddy current hardness testing technology has been widely used in the detection of metal components in the automotive The eddy current technology is usually used to detect engine blade cracks, bolts, cracks in the screw holes, multi-layer structure of the aircraft...

Samedi 02 décembre 2023

Product description Precision Tubes Description Precision steel pipe features in large size, high precision, smooth surface inside and outside, precision steel tubing suppliers and precision steel tube manufacturers produces no oxide film on the surface inside and outside of the steel...

Samedi 02 décembre 2023

Anern has the WSPI series and the SPI series low-frequency solar inverters. The AN-WSPI low-frequency hybrid inverter is the best choice for small household inverters, stores, and other solar energy generation needs. The AN-SPI low-frequency power inverter with UPS function is the...

Samedi 02 décembre 2023

Prix : MSRP US$10K~US$450K

Tire Mol 3D Printer RA600 is made for tire molds, reproduces patterns perfectly, and it increases productivity while reducing expenses. Digital tire mold manufacturing based on 3D printing effectively shortens the lead time of the tire master mold and optimizes the process, reducing labor costs...

Samedi 02 décembre 2023

Jacquard curtain fabric can be used for high-grade clothing production materials and decorative industrial materials (such as curtains, and sofa fabric materials). The jacquard fabric manufacturing process is complex. Warp and weft are woven each other, forming different patterns...

Vendredi 01 décembre 2023

YiRui Metal can provide the service of magnesium die cast, provide the related magnesium alloy parts according to the customer's requirements, and also can produce to meet the customer's needs. Cold type magnesium alloy dies casting machine(Thixo) 250T/2 sets. 500t/2 sets , 1200t/2...