DIAMETER - 10932 Annonces

Mercredi 28 avril 2021

Corner cube is total reflecting prism formed by 3 perpendicular surfaces, where the incident light angle does not influence the final emerging light angle but reflected by 180°, it offers excellent parallelism between the incident and exit beams. Hyperion Optics supplies both corner...

Mercredi 28 avril 2021

Elliptical Mirror is still a flat mirror, but the shape is cut into an oval, and the outer circle and the mirror into a 45 ° angle. When the elliptical mirror is mounted in the optical path by 45 [deg.], The optical aperture of the lens is just circular. Elliptical mirrors are also...

Mercredi 28 avril 2021

TECON Scaffold Ringlock is designed & manufactured to be the most convenient and efficient scaffolding ring lock system available for sale. With only a few user-friendly components and a hammer, it can be used as a shoring system, facade platform as well as work access for both...

Mercredi 28 avril 2021

FLOAT EQUIPMENT Floating equipment is generally used in the lower section of the well to help: Reduce strain on the derrick while guiding casing past ledges and slough zones in the hole; Provide a landing point for bottom and top cementing plugs (pumped ahead of and behind the slurry...)

Mardi 27 avril 2021

Pump parts A pump is a machine for conveying or pressurizing a fluid. It transfers the mechanical energy or other external energy of the prime mover to the liquid, so that the liquid energy increases. Pump is mainly used to transport water, oil, acid and alkali liquid, emulsion, suspended...

Mardi 27 avril 2021

Our company, Hangzhou Roll Forming Technology Co., Ltd, is a China stainless steel tube mill manufacturer and steel tube mill manufacturers, has engaged in designing and manufacturing roll forming, coil processing equipment and stainless tube mills for 17 years. Stainless Steel Tube...

Lundi 26 avril 2021

Laifual adopts our newest developed "LS" tooth profile, which improves harmonic reducer's comprehensive performance a lot. Compared to the original "δ" tooth profile, the load capacity of our harmonic drive reducers/gearboxes increases 15%; temperature rise decreases 8-10 ℃; gear's...

Lundi 26 avril 2021

Laifual prides itself on delivering innovative solutions for our customers in varying industry sectors, applications, and locations all over the world. Our gearbox products are aimed at providing optimal performance solutions for industry partners. Harmonic Gearbox LSS/LSG/LSN Standard...

Lundi 26 avril 2021

Rubber sealed deep groove ball bearings have rubber seals installed on one or both sides and are pre-lubricated with grease. rubber sealed deep groove ball bearings with their simple design, high resistance and low-maintenance, while many different retainers are available, pressed...

Lundi 26 avril 2021

Prix : 400USD

The LHT Series of hollow output shaft gearboxes use hat type flex spline. We can divide the LHT drive actuators into 5 versions, LHT-I, LHT-II, LHT-III, LHT-IV and LHT-V. Differences Among Different LHT Hollow Shaft Gearbox: LHT-I: use uni-body type wave generator LHT-II: cross...

Lundi 26 avril 2021

The most important in the running of the conveyor is the conveyor roller. And the most important part of the roller is bearing. Shandong Xinkaite bearing Co.,Ltd.is located in Yandian, the Chinese Bearing City. concentrates on manufacturing industrial bearing, mainly used in conveying equipment...

Lundi 26 avril 2021

Started in 2006 (Former Shandong Guan County XinKai Bearing Co., Ltd.), depending on the Yandian Professional Bearing Market, our company pushes the business to market domestic and abroad. And now there are many long-term fixed partners of ours, in the industrial areas of conveying...

Lundi 26 avril 2021

Ortec provides a variety of dump truck tires for sale in both bias and radial construction to its clients in open-pit mining and quarrying. The range of dump truck tyres includes 14.00×24, 14.00×25, 16.00×25 in both radial and bias construction (TRA code E3 and E4) for the economic...

Lundi 26 avril 2021

XKTE - Ball Bearings and Rolling Bearings in Conveyor Technology XKTE is the specialist in rolling bearing technology for the mechanical application of continuous conveyors. Design Characteristic: Shandong Xinkaite Bearing Co., Ltd. is a manufacturer of industrial Bearing in Liaocheng Shandong...

Lundi 26 avril 2021

Prix : 100USD

WLS-MDD binocular night vision device is a high-performance pure military head-mounted night vision device, which is designed with reference to the current head-mounted night vision device PVS-31 in the United States. The night working binoculars are divided into two models: low-light...

Lundi 26 avril 2021

Prix : 100USD

Protecting cameras from water, the camera housings produced by Walson are all made in accordance with the IP66 standard. Heater and fans are available to provide stable environment for camera work. The housing material will be tested by fog, salty, water, strong light/wind and snow...

Mercredi 21 avril 2021

Hay refers to dried grass used as livestock fodder. It is fed to especially pasturing animals, for instance, sheep, goats, horses and cattle when grazing is unobtainable due to harsh climatic conditions. Pellets are renewable organic matter made from compressed hay and other biomass...

Mercredi 21 avril 2021

Prix : 100USD

Better clarity and WBC, higher telecentricity Especially suitable for round workpiece measurement、 Specification Of Telecentric Illuminator Model Focal Distance (MM) Rated Power (W) Rated Voltage (V) Max Current (MA) Output Light Diameter Φ (MM) WD (MM) WD Tolerance (±mm)...

Mercredi 21 avril 2021

Prix : 100USD

Suitable for ITO, particle detection, wafer inspection Infinity optical design can match infinity objective lens with a different mag High-contrast & brightness image solution New modular design allows customizing different optical layouts on customers' requests Specification...

Mercredi 21 avril 2021

Prix : 100USD

Since 2009, Canrill has provided more than 1700 kinds of high-performance telecentric lens and illuminator for machine vision system. With the characteristics of extensive models, immediate delivery, cost-effective solutions and free customization service, Canrill can always be your...

Mercredi 21 avril 2021

Function, consistency and fun are the hallmark of our quality elastomerics, including latex-free options, interesting shape and dozens of ligature colors. We provide a wide variety of colors and sizes of teeth rubber for your clinical needs. Our superior elastic power chain and brilliant...

Mardi 20 avril 2021

Compression Spring The compression spring produced by KC Hardware adopts automatic coil spring equipment controlled by Taiwan computer. The feeding accuracy of the equipment is controlled at 0.02MM. The free length of the spring is fully inspected online to ensure the spring length tolerance...

Mardi 20 avril 2021

The outer diameter of the shaft products that can be processed by KC Hardware is from 1MM to 60MM. The materials of the products can be copper, iron, aluminum, and stainless steel. The products are formed at one time on a CNC lathe, and they can be turned and processed. The surface...

Mardi 20 avril 2021

All metal materials with round cross-section up to 60mm can be turned in steps drilled and tapped, and surface knurled for optimal machining by KC Hardware. HomeCapabilitiesCNC Lathe Service KC Hardware Company has more than 100 automatic lathes, which can meet the mass production...

Mardi 20 avril 2021

KC Hardware has several cylindrical grinding processing equipment for shaft products. The outer diameter tolerance of the product can reach an accuracy of 0.001MM, and the surface finish of the product can reach Ra0.1 or more. The equipment has high grinding efficiency and can meet...

Mardi 20 avril 2021

PVC pipe production line is mainly used in the manufacture of the plastic PVC pipe with various tube diameters and wall thickness in the aspects such as the agricultural and constructional plumbing, cable laying etc. This set is composed of the conical twin-screw extruder, vacuum...

Mardi 20 avril 2021

Features of Saddle Welding Machine LHA serial saddle welding machine can fabricate the reducing tee welding fittings in PE, PP, or other thermoplastic material, specified, Germany hydraulic seal, with the optional data logger in different languages (Mandarin, English, Vietnamese and Thai)...

Mardi 20 avril 2021

Features of Manual Butt Welding Machine LHM Series Manual butt welding machines are suitable for PE & PP and fittings on the building site and in the factory, with high-quality aluminum casting without compromising strength. PTFE coated heating plate, adjustable and digital temperature...

Vendredi 16 avril 2021

Place of origin Jinan Brand Hongyang model cnc router multi spindle machine using dust shoe Delivery time 1-7 days Specifications: The diameter is 100mm Application: used in multi spindle cnc router machine Material Iron Function: used in multi spindle machine to...

Jeudi 15 avril 2021

Quantité : No MOQ - Prix : Depends on size

Diameter Surface Roughness Sphericity Circular run-out 2--6 mm RA0.04 0.001 ↑0.1 6.5-10 mm RA0.04 0.001 ↑0.1 10.5-14 mm RA0.04 0.002 ↑0.1 14.5-20 mm RA0.04 0.004 ↑0.05 >20 mm RA0.04 0.005 ↑0.03 ISO 286-2 Carbide Round Bar Tolerances "h Series" in Millimeters ...