TREATMENTS - 8529 Annonces

Vendredi 14 mai 2021

Features of Cassava Starch Hydrocyclone(Extraction Machine) Cassava Sieving Machine - Starch Hydrocyclone Processing Capacity: 25m3/hour Application Scope: Starch milk concentrating and refining Product Introduction: Starch hydrocyclone, cassava sieving machine, starch refining machine...

Jeudi 13 mai 2021

Aura quartz which is known Titanium Quartz as well is made from natural crystal, aura quartz is divided into aqua aura quartz, rainbow aura quartz, rose aura quartz,ect.. But manufactured coating on quartz crystal. This aura treatment is no longer a topical coating and permeates...

Mercredi 12 mai 2021

Product description Blind flange is also called blind board, and its proper name is flange cover. It is a flange without holes in the middle for sealing the pipe plug. There are many types of sealing surface, such as rise face, ring joint face, large or smalltongue face and groove face...

Mercredi 12 mai 2021

Product description Tube cap, also known as end cap, plug, cap, pipe cap, stuffy head, welded in the end of the pipe or installed on the outside thread of the end of the pipe to cover the pipe plugging fittings. It is used to close the pipeline and has the same function as pipe plugging...

Mercredi 12 mai 2021

Product description We are a stub end manufacturer, supplier and exporte, stub end divided into Europe system, Japan system, America system and lap Joints. ASME/ANSI B61.9 for long type stub end, MSS SP 43 for short stub end. HG20621 for short stub end, GB9118 1TYPE for long stub end...

Mercredi 12 mai 2021

Product description We are manufacturers, suppliers, and exporter of reducing tee, branches diameters are different with the other two main pipe diameters and are called three-way with different diameters. Our reducing tee are widely used in construction and maintenance of petrochemical...

Mercredi 12 mai 2021

Product description We are manufacturer, supplier, and exporter of equal tees, which are also understood as straight tees, these equal tees have a diameter that is same to the diameter of the main pipe, as a result, the name equal tee. We furnish ss butt weld equal tees that are set...

Mercredi 12 mai 2021

Threaded rod magnets: Material Sintered Neodymium Iron Boron, Steel Dimensions Diameter Min.10 mm—Max.136 mm Pull Force 5 lbs — 900 lbs Magnetization Orientation Axial Magnetic Properties Grade Max. Operating Temperatures N35-N52 80°C (176°F) Remanence(Br) 11,300 Gauss — 14...

Mercredi 12 mai 2021

Material Sintered Neodymium Iron Boron, Rubber, Steel Dimensions Round / Rectangular Customized Pull Force 8 lbs — 50 lbs Magnetization Orientation Axial / Through Thickness Magnetic Properties Grade Max. Operating Temperatures N35-N52 80°C (176°F) Remanence(Br) 11...

Mercredi 12 mai 2021

We offer many tapes of industrial magnetic hooks,and mow the magnetic hooks for sale is doing.if you want buy one,you can contact us anytime. Material Sintered Neodymium Iron Boron, Steel Dimensions Diameter Min.16 mm—Max.136 mm Pull Force 12 lbs — 900 lbs Magnetization...

Mercredi 12 mai 2021

Neodymium Magnets with Countersunk Holes: Material Sintered Neodymium Iron Boron, Steel Dimensions Diameter Min.16 mm—Max.136 mm Pull Force 10 lbs — 900 lbs Magnetization Orientation Axial Magnetic Properties Grade Max. Operating Temperatures N35-N52 80°C (176°F) ...

Mercredi 12 mai 2021

C Channel Magnets Material Sintered Neodymium Iron Boron, Steel Dimensions Length Min.38 mm—Max.136 mm Pull Force 28 lbs — 900 lbs Magnetization Orientation Through Thickness Magnetic Properties Grade Max. Operating Temperatures N35-N52 80°C (176°F) Remanence(Br) 11...

Mardi 11 mai 2021

Quantité : 100 - Prix : 6 000,00 €

ZYD Transformer Oil Purification Machine Thousands of oil filled transformers that contain huge quantities of insulating oils inside them are in service today. Transformer Oil Treatment machine at regular intervals ensures; - Provide efficient cooling system. - Protect the transformer...

Mardi 11 mai 2021

Quantité : 100 - Prix : 7 000,00 €

ASSEN ZYD Transformer Oil Degassing Plant Application: Oils inside transformers are mainly for insulating purpose- apart from which they also suppress corona and arcing, and also act as coolants inside the machines. These oils must be maintained absolutely clean and dry in order...

Mardi 11 mai 2021

Prix : 2300 USD/Ton--3700 U

The medical caps are mostly made of non-woven fabrics, without adding harmful materials when producing. Non woven fabric itself has good air permeability, so non woven medical caps are also air permeability, sterilized by ethylene oxide. The product is sterile and non-toxic, it can...

Mardi 11 mai 2021

Prix : 2300 USD/Ton--3700 U

PE laminated non woven garments is a uniform coating of PE formed by high-temperature heating on the surface of other non-woven fabric, after cooling and pressing, a new composite non woven fabric is formed. We can use PE film to treat other kinds of fabrics composite in many ways...

Mardi 11 mai 2021

Prix : 2300 USD/Ton--3700 U

The medical cloth is mainly coated on the surface of other non-woven fabrics cloth uniformly with PE in hot melt state after high-temperature heating and formed new composite non-woven fabrics by cooling and pressing or other forms of a composite non-woven fabric without PE film....

Mardi 11 mai 2021

Prix : 2300 USD/Ton--3700 U

Pp spun bond non-woven fabric are widely used in baby diapers, sanitary materials, and other industries because of its soft, breathable, non-irritating, non-sensitizing and hydrophilic properties. Both the surface and bottom of baby diapers are made of non woven fabric. The leak-proof...

Mardi 11 mai 2021

Well solve the hydrophobicity loss problem of silicone rubber external insulation when in continual rainy and wet weather. It also helps to lessen the happening chance of unknown flashover on the silicone rubber external insulation. Applicable voltage: 1~1000kV rated voltage. Applicable...

Mardi 11 mai 2021

Multifunctional Insulator Cleaning Agent (RS-10) is mainly used for eradicating dirt, dust and contaminations on surface of the power equipment, especially clean that which surface was heavily polluted. After cleaning, RS-10 can significantly enhance the adhesion between the RTV...

Mardi 11 mai 2021

Prix : 100USD

Description of Stainless Steel Gate Valve: ZECO stainless steel gate valve is basically used for pipelines with corrosive media. For any kind of stainless steel material, the ability to resist medium corrosion is relatively limited, and is affected by many external factors, such as temperature...

Mardi 11 mai 2021

Conventional capacitors can only meet the requirements of circuit operation with a simple structure and small load, but it is difficult to store charge for circuit operation with a large load. In recent years, the popularization and application of supercaps have effectively solved...

Dimanche 09 mai 2021

Prix : 25$/kg

La composition du moringa Les spécialistes sont unanimes : la composition du moringa est particulièrement riche d'un point de vue nutritif. De nombreux nutriments s'y retrouvent et particulièrement des vitamines. Au total, ils seraient même plus de quatre vingt dix. Beaucoup estiment...

Samedi 01 mai 2021

Wet type fish feed extruder machine is mainly used to produce all kinds of floating or sinking aqua feed for fish, shrimp, eel, bullfrog, etc. It can also be adopted to produce feed pellets for a pet, such as dogs, cats, and so on. Raw materials for this machine can be corn, soybean meal...

Mercredi 28 avril 2021

CNC metal parts are about to turn the manual work into computer programming. Of course, you need to have experience in manual processing. General CNC machining usually refers to computer digital control precision machining, CNC machining lathes, CNC machining milling machines, CNC...

Mercredi 28 avril 2021

Sheet metal stamping (also known as metal pressing and forming) is the process of placing flat sheet metal in either blank or coil form into a stamping press where a tool and die surface forms the metal into a net shape. Metal pressing and forming include a variety of sheet metal...

Mercredi 28 avril 2021

The sheet metal chassis is a chassis that is required for the use of a comprehensive cold working process for metal sheets (usually below 6 mm). Processing techniques include shearing, punching, cutting, compounding, folding, welding, riveting, splicing, forming (such as car body)...

Mercredi 28 avril 2021

Sheet metal bending is a process in which a metal sheet is passed through a pressure device and a special mold to transform a flat sheet into a three-dimensional process called bending. Due to the different materials, thicknesses, lengths, and widths of the plates and the different...

Mercredi 28 avril 2021

Detail The alloy of copper and zinc is called brass! The content of brass elements affects its processing properties. Our brass has strong wear resistance. High corrosion resistance, excellent hot workability and weldability, good machinability and easy soldering. All the holes and...

Mercredi 28 avril 2021

Detail Introduction of Stamped Sheet Metal Panels Material: aluminum galvanized sheets（stainless steel, mild steel, steel alloy） Process: stamping- forming- riveting- deburring assembly Feature: good quality, custom made Surface treatment： electroplating， Black oxide，anodizing，Sand blasting...