INDUSTRIAL - 16782 Annonces

Samedi 08 avril 2023

Geko provides various types of severe service ball valve. Our severe service metal seated ball valve are subjected to high cycle rates, high temperatures, high pressures, abrasives and corrosiveness, so they can be applied in many industrial fields. GEKO Valves & Controls, born in Germany...

Samedi 08 avril 2023

High flow rate, low fluid resistance, no water-hammer Maintenance-free, super long life; Low control air consumption. Contact Geko, one of the specialized angle seat valve factory, for the angle seat valve price. Advantages Of GEKO Pneumatic Gauge Valves Large flux, low resistance...

Samedi 08 avril 2023

Geko pneumatic actuators used compressed air to exert force on a cylinder piston and thus push or pull it in a specific direction. The motion of the piston is delivered to the parts to be moved via the piston rod or magnetic friction closure. A pneumatic cylinder is an actuator operated...

Samedi 08 avril 2023

Technical Data Painted steel or stainless steel casing. Casing and operating screw oversized. Tightness with gasket when closed. Stainless steel gate(reinforced). No retention zone on stainless steel back seat. All manoeuvring parts in stainless steel (stem and supports). Bronze nut...

Samedi 08 avril 2023

Geko one piece ball valve consist of one body piece, which means the valve cannot be disassembled for cleaning and there are no joints to reduce the risk of leakage. Due to low cost, it is generally not repaired, but the valve is robust. GEKO Valves & Controls, born in Germany...

Samedi 08 avril 2023

Geko multi way ball valve include 3-way and 4-way ball valves designed to be used as 3-way selectors for hydraulic applications (L-port, T-port or X-port, 90° operation). And Geko multi-way ball valves are available in nominal widths from DN 4 to DN 65. GEKO Valves & Controls...

Samedi 08 avril 2023

Geko knife gate valves are mainly manufactured for industrial shut-off applications, especially for media with high content of suspended solids. The polishing of faces facilitates the of the gate in the product. At the end of the valve closing, the gate is stuck to the joint to assure...

Samedi 08 avril 2023

Sand casting means the main material consisting of the mold is sand, and the melted metal fills the casting cavity only by its gravity. Generally, this method of making the casting products is so-called sand casting. There are several different kinds of sand applying to industrial...

Samedi 08 avril 2023

Quantité : 200sets pe - Prix : 100-5000

ZP series vertical sump slurry pump is specially designed for various oil sump conditions and can also be used for floating dewatering or other floating pump platforms. As a cantilevered china vertical slurry pump, ZP series pumps have no underwater bearings or seals; Thereby avoiding...

Samedi 08 avril 2023

Quantité : 200sets pe - Prix : 100-5000

vertical multistage centrifugal pump manufacturers All Pumps Machinery provides SDL/SDLT vertical multistage centrifugal pump parts, which can be used as booster pumps, are specially designed and manufactured for municipal water supply and have a wide range of applications. One...

Samedi 08 avril 2023

Quantité : 200sets pe - Prix : 100-5000

Vertical centrifugal sump pump designed in accordance with ISO2858 standard, are single-stage single-suction horizontal and vertical inline centrifugal pumps has good performance of reliable operation and high efficiency, featured by integrated simple construction for less space,...

Samedi 08 avril 2023

Quantité : 200sets pe - Prix : 100-5000

Designed for dual functions, it can maintain a constant vacuum in the well point system and transport sewage and mud. The start-up is completely automatic without adding water (dry start), and it can even run under dry conditions (dry run). Dry start-up pumps can be used to pump any...

Samedi 08 avril 2023

Quantité : 200sets pe - Prix : 100-5000

All Pumps Machinery's automatic oil filling pump is designed with a clear focus on reliability, efficiency and durability. The vacuum pump for priming centrifugal pump has a 100% mechanical starting system, which can be quickly started and restarted even under dry conditions. The...

Samedi 08 avril 2023

Quantité : 200sets pe - Prix : 100-5000

GNWQ vertical submersible sewage pump is a cutting sewage pump which is designed to transport sewage and waste. Its cutting part has a unique spiral structure and a sharp edge design. Material Rockwell hardness above HRC49-52 (special materials need to be customized in advance for...)

Samedi 08 avril 2023

Quantité : 200 - Prix : 100-5000

GNWQ series sewage cutting pump non-clogging submersible sewage water pump is suitable for 0-20 meters, large flow, medium and low head use, full head, low energy consumption. The product also adopts an easy-to-remove cutter head design, which can be replaced with different forms...

Samedi 08 avril 2023

Quantité : 200sets pe - Prix : 100-5000

TPOW series single-stage double suction split case centrifugal pump adopts the original and modified impeller and cutting and has the characteristics of full range, wide range and high efficiency. The single stage centrifugal horizontal split case pump can provide the operating...

Samedi 08 avril 2023

BS6004 6243Y cables refer to the flat three cores and circuit protective core (earth core) with a voltage of 300/500v. 6243y flat 3 core zhls cable is normally used fixed installation in domestic locations and industrial lighting in both dry and damp walls, and also can be fixed in cable tray...

Samedi 08 avril 2023

BS6004 624-Y flat twin and earth cable refer to the flat cores with the earth with a voltage of 300/500v. They could be single-core +earth 6241Y, twin cores +earth 6242Y cable, three cores +earth 6243Y, normally used fixed installation and industrial lighting. These flat twin and...

Vendredi 07 avril 2023

Quantité : Quantities

Sibai provide custom metal washers from almost any material: Steel, Stainless Steel, Aluminum, Brass, Copper, Titanium, Nylon, Acetal, PTFE, Fiberglass, Rubber and more. The finishing capabilities Sibai can provide are Heat treating, Plating, Flattening, Painting, Grinding, Coating...

Vendredi 07 avril 2023

Quantité : Quantities

Sibai does not manufacture its own springs. But springs are often an essential part in the assembly of products. Sibai purchases a large number of springs of various types for customers' assembled products. Custom springs Features A spring is a mechanical part that uses elasticity to work...

Vendredi 07 avril 2023

Cylindrical graphite crucible works best with a quartz jacket because graphite oxidizes. High purity graphite crucible is good or bad with its material and density. Good graphite crucible doesn't oxidizes easily, so that the production loss is low. Bad graphite oxidation is not uniform...

Vendredi 07 avril 2023

Natural graphite powder is widely used in advanced refractory materials and coatings in metallurgical industry. After in-depth processing, graphite emulsion can be produced, which is used in lubricants, demoulding agents, drawing agents, conductive coatings and so on. NATURAL FLAKE...

Vendredi 07 avril 2023

The application of large graphite block in photovoltaic industry has been rapidly developed, and the output and market of polysilicon ingot materials for solar panels have increased by leaps and strides, which also provides a promising new market for graphite products in the field...

Mercredi 05 avril 2023

On Metal 7020 Anti Metal Tag Demension 70 x 20 x 3,4 mm XCTF-7020-EU (Monza 4QT) XCTF-7020-FCC (Monza 4QT) Main Features of On Metal 7020 High performance for a wide range of industrial and metal asset management applications Compact slim design IP65 rated Serialized TID Excellent...

Mercredi 05 avril 2023

Invengo's diversified and specialized Hard Tag RFID product portfolio offers global customers a broad range of options to address the increasing rugged cloth rfid tag demand from various industries. Innovative broadband RFID antenna design from rfid service providers enables end-users...

Mercredi 05 avril 2023

Ceramic On Metal 2525 RFID Ceramic Tag Demension 25 x 25 x 3 mm XCTF-2525-EU (Alien Higgs 3) XCTF-2525-FCC (Alien Higgs 3) Main Features of Ceramic On Metal 2525 High performance for a wide range of industrial and metal asset management applications Compact slim design IP65 rated...

Mardi 04 avril 2023

Prix : 100USD

China UTMOST Valves for Chemical Industry UTMOST types of valves used in chemical industry is small in size, light in weight, high in performance, and used for precise control of small flow. For example, it is used in precision chemicals and scientific research institutions to perform...

Samedi 01 avril 2023

Prix : USD0.1-15

A thread is a continuous helical ridge formed on the inside (nut) or outside (screw) of a cylinder. This ridge is called the crest. Between each crest is a space, called the root. Threads are set at an angle to the axis of the bolt or nut. DESCRIPTION OF THREADED PARTS What Is Thread's Function...

Vendredi 31 mars 2023

Product Description CAS: 28578-16-7 Type: Pharmaceutical Intermediates Purity: >99% Appearance: Powder Packaging Detail: Professional, environmentally friendly, convenient and efficient packaging services will be provided. 0.5kg/1.0kg/2.0kg/5.0kg/Al-foil bag, 25.0 kg/drum or upon...

Vendredi 31 mars 2023

Galvanizing line tension leveller is a continuous stretching bending straightening machine that is used in the continuous hot-dip galvanizing line. Combining the characteristics of continuous tension metal straightener and roller straightener, the strip is straightened by plastic...