CAPACITY - 14541 Annonces

Vendredi 09 décembre 2022

The extra-deep tread pattern of Aulice L-5 gives outstanding wear life potential and the sidewall/tread intersection design gives an excellent level of damage and cut resistance. front end loader tires wheel loader excavator Abrasion Resistance Load Carrying Capacity Puncture Resistance...

Vendredi 09 décembre 2022

Prix : USD10-USD1000000

The round cooling tower uses the contact between air and water to cool the water, and uses water as the circulating coolant to absorb heat from the tower and discharge it to the atmosphere, so as to reduce the air temperature in the round shape cooling tower and produce cooling water...

Jeudi 08 décembre 2022

Quantité : 10000pcs / - Prix : USD 130 - USD 980

HMCG-II series flex spline belongs to a cup-shaped standard structure and its input shaft connects with the inner hole of the wave generator through Oldham coupling. Generally, the circular spline is fixed and the flex spline does output. Features Of HMCG-Ⅱ Series Unit Harmonic Drive...

Jeudi 08 décembre 2022

Quantité : 10000pcs / - Prix : USD 130 - USD 980

HMHG-IV series flex spline belongs to the hollow flanging standard structure. The wave generator cam has its own Input shaft and there is a support bearing inside the reducer The reducer is fully sealed and easy to install, especially suitable for the situation where there is a need...

Jeudi 08 décembre 2022

Quantité : 10000pcs / - Prix : USD 130 - USD 980

HMHG-V Series with hat-combination standard structure. The input shaft can connect with the motor directly. The cable can go through the low-speed hollow shaft Encoder can be installed on both input and output shafts Especially for Cobot and Joint modular Features of HMHG-V Unit (Hollow ...)

Jeudi 08 décembre 2022

Quantité : 10000pcs / - Prix : USD 130 - USD 980

HMCG Series is cup type of harmonic drive, it has the characteristics of compact and concise design, no backlash, input and output coaxial, excellent in positioning and rotation accuracy. HMCG Series Harmonic Drive Cup Type List HMCG-Ⅰ Series Component Harmonic Drive HMCG-I high torque...

Jeudi 08 décembre 2022

Quantité : 10000pcs / - Prix : USD 130 - USD 980

HMCG-I consists of three basic components: flexible gear, rigid gear, and wave generator. The flexible gear is a cup-shaped standard structure, and its input shaft directly cooperates with the inner hole of wave generator and connects with it through flat key or fastening screw."...

Jeudi 08 décembre 2022

Quantité : 10000pcs / - Prix : USD 130 - USD 980

HMCD-II series, with a commitment to lightweight and compact size of harmonic gear transmission, not only inherits the advantages of traditional products, but also realizes bold shape design based on the market demands. The overall machine adopts a super-flat structure that is light and compact...

Jeudi 08 décembre 2022

Quantité : 10000pcs / - Prix : USD 130 - USD 980

Through big data modeling, simulation optimization and performance verification, Han's Motion team realizes the optimal design of tooth profile, breaks through barriers of experience accumulation and correction in transmission design, and continuously improves and innovates in the...

Mercredi 07 décembre 2022

The explosion proof VFD is committed to intelligent control of mining. Our explosion proof electric motor can improve the efficiency of the equipment, and reduce the maintenance of the complete set of equipment. The explosion proof electric motor operates reliably to ensure production safety...

Samedi 03 décembre 2022

What is teardrop pallet racking? Teardrop Pallet Racking is commonly seen in North and South America market, The name, teardrop racking, comes from the perforated shape similar to water droplets. The teardrop pallet racking is mainly composed of teardrop uprights, teardrop pallet rack beams...

Samedi 03 décembre 2022

Double Deep Pallet Racking What is double deep racking? Double Deep Pallet Racking System is a high-density warehouse storage solution. Yuracking double deep pallet racks are usually arranged in four lines (two back-to-back bays) together. Our double deep pallet racking system needs...

Samedi 03 décembre 2022

Prix : $1000-200000

X Ray Inspection Machine for Sale In the inspection process of electronic components, the pcb x ray inspection equipment can be directly connected to the SMT production line for high-capacity automatic inline full inspection, it can be used offline with unloader and loader. PCB x...

Samedi 03 décembre 2022

Prix : $1000-200000

Microfocus X-ray inspection is widely used in the LED/automobile/aerospace/EMS ETC field and become a necessity for modern PCBA inspection. As a professional auto matic counting and inspection system manufacturer, Seamark Zhuomao provides SMT BGA inline x ray machines that have the...

Samedi 03 décembre 2022

01- 4CH CWDM Mux Demux CWDM Coarse Wave Division Multiplexing (CWDM) Multiplexer/Demultiplexer (MUX/DEMUX) modules support ITU-T G.694.2 wavelengths between 1270nm to 1610nm in 20nm increments. CWDM/X modules are protocol and rate transparent allowing different services up to 10Gbps...

Samedi 03 décembre 2022

AWG Mux Demux 01- Athermal AWG Module The athermal Array Waveguide Grating Module (awg mux) from Sintai is based on waveguide grating technology on the silicon substrates and adopts the unique thermal-free package design, which is a completely passive DWDM solution without power, software...

Vendredi 02 décembre 2022

Quantité : 5T - Prix : 8-200

Different gel strength affects the taste, elasticity and crispness of final products. The gel strength is enhanced with the increase in heating temperature. The thermal-irreversible gel is formed when the temperature reaches 80°C. Then increase the temperature of the curdlan gel till 130°C...

Vendredi 02 décembre 2022

Prix : USD 2500/T to USD 35

The aluminium frames around the solar panel is an important but often ignored component of a solar panel. Aluminium profile solar panel frame and mounting bracket are normally used to seal and fix solar battery components. As one of the important industrial aluminium profiles produced by Otalum...

Vendredi 02 décembre 2022

Quantité : 10000pcs - Prix : USD0.5-15000

Metal dental Cabinet Full steel structure medical treatment cabinet has strong function, good load-bearing capacity, beautiful and generous, it not only enriches your storage space, but also meets the various needs of medical staff. The cabinet body is made of high quality cold-rolled...

Jeudi 01 décembre 2022

Conventional Double Column Vertical Lathe, Regarding the column heightening model, there is a double sliding column system. The cross beam can move up and down to achieve better cutting accuracy. We have several models to be selected for the best cutting need. Features of Conventional...

Jeudi 01 décembre 2022

Walkson provides custom made big ground engaged tools (G.E.T), supplies small wheel loader dragline bucket teeth and dragline teeth. The excavator teeth can be castings and close die forging parts. Mechanical property of the cast teeth as below: Hardness HRC 48~52 AKV @20℃ ≥17J AKV...

Mercredi 30 novembre 2022

Usage of Endoscopic Retriever Bag Instruction for Use The single use endopouch retrieval bag is not intended for use when endoscopic techniques are contraindicated. The single use endo retrieval bag is not intended for use with any shape edge tissue, like crushed bones. Endoscopic...

Mercredi 30 novembre 2022

Quantité : 1000

The air cooled industrial chiller adopts a finned condenser, which has fast heat conduction and a good heat dissipation effect without the need to provide cooling water. It can provide ice water at 5~35℃, and the low-temperature type can be as low as 3℃ (the temperature difference...)

Mercredi 30 novembre 2022

Quantité : 1000

The air cooled screw chiller adopts a finned condenser, which has fast heat conduction and good heat dissipation effect without the need to provide cooling water. It can provide ice water at 5~35℃, and the low temperature type can be as low as 3℃ (the temperature difference does not exceed ±1℃)...

Mardi 29 novembre 2022

Quantité : 150000/wee - Prix : 0.2---0.8USD

450ml square PETG face wash bottle with pump of Yansen has saving consumption, large-calibre design, large capacity, and a smooth pump head. Descriptions of 450mL Square PETG Face Pump Bottle Like quality 250ml shampoo square bottle, 450ml square PETG face wash pump bottle of Yansen...

Mardi 29 novembre 2022

Quantité : 150000/wee - Prix : 0.2---0.8USD

Yansen 280ml PETG square plastic shampoo bottle for emulsion, shampoo and face wash have wide application. As they are all made from green materials, you can use them at ease. Descriptions of 280ml PETG Square Plastic Pump Bottle for Emulsion, Shampoo and Face Wash Yansen 280ml PETG...

Mardi 29 novembre 2022

Quantité : 150000/wee - Prix : 0.2---0.8USD

Yansen 200ml travel-size PET toner bottle with aluminum cap for toner uses high-quality materials with fine appearance. It is made through high-quality production process, so you can use it at ease. Descriptions of 200mL Travel-size PET Bottle With Aluminum Cap For Toner As a reliable...

Mardi 29 novembre 2022

XLNT-3000 3000W Fiber laser cutter chiller is suitable for 3000W fiber laser cutter. XLNT-3000 adopts intelligent dual-temperature dual-control mode, which can cool the fiber laser generator and QBH connector at the same time. It has an ultra-high temperature control accuracy of ±0...

Mardi 29 novembre 2022

XLNT-1500 1500W fiber water cooler is specially developed and produced to meet the cooling requirements of the 1500W fiber laser machine. XLNT-1500 fiber water chiller provides users with two intelligent temperature control modes: intelligent temperature control and constant temperature control...

Mardi 29 novembre 2022

XLNT-1000 Fiber chiller cooling system is used to cool 1000W fiber laser machine. The XLNT-1000 fiber water chiller can meet the precise temperature control requirements of fiber cutting machines and other equipment during cutting operations, and the laser chiller temperature control...