PROCESSING - 10300 Annonces

Mercredi 20 avril 2022

Quantité : more than - Prix : 3000-6500 euro per M

Description of Cold Rolled Coil Cold rolled coil, as known as CR coil, CRS or CRC. Cold rolled steel coils are a farther product that uses hot rolled steel coils to do further processing. The further processed steel coil put in a cold rolling mill where the material is cooled (at...)

Mercredi 20 avril 2022

Quantité : 500tons - Prix : USD0.015-----USD100

Category: rubber magnets/ flexible magnets Advantages: can be made into complex shape without mechanical processing Disadvantages: low magnetic energy and low working temperature Brief introduction of rubber magnetic strips: Rubber magnetic strips are mold extruded strip type rubber magnets...

Mercredi 20 avril 2022

Quantité : 500tons - Prix : USD0.015-----USD100

Category: rubber magnets/ flexible magnets Advantages: can be made into complex shape without mechanical processing Disadvantages: low magnetic energy and low working temperature Rubber magnets are compounded by the materials of ferrite magnetic powder and synthetic rubber, plastic...

Mardi 19 avril 2022

Quantité : 100,000pcs - Prix : US$0.20-US$100.00

Packaging & Bag *Material: kraft paper. *Handle: 2pcs handles fixed on top. *Printing: one black logo printed at middle front side. Packaging & Bag *Material: paper. *Handle: 2pcs handles fixed on top. *Printing: full printed. Packaging & Bag *Material: paper. *Handle...

Mardi 19 avril 2022

The rubber industry is one of the important basic industries of the national economy. cnc machining rubber not only provides people with daily-use, medical, and other light industrial rubber products that are indispensable for daily life, but also provides various rubber production...

Mardi 19 avril 2022

Prix : 10-30USD

CNC Router Bits for Sale The types of cheap cnc router bits are shown as follows: wood carving router bits, stone bits, and metal working tools. These cnc router cutting tools are generally used for the relief of sharp knives and hollow cutters. Commonly used cnc machine components...

Mardi 19 avril 2022

Prix : 10-30USD

CNC engraving tool is the tool used for slate leveling. After the measurement, the data is generated, and the data is imported into the machine's processing system for engraving, which can greatly reduce the error of the engraving machine. As one of cnc components manufacturers, we...

Mardi 19 avril 2022

Prix : 1000-6000USD

Corner board machine is a machine that professionally produces paper corner protectors. Paper edge protector machines mainly produce V shape paper angle boards and they also can make paper slip sheets and U shape paper protectors by changing molds. A paper slip sheet machine is used...

Mardi 19 avril 2022

Prototype molds are rapid processing for the molds. It's totally different from production molds as they can't be used in the long term. As a professional mold maker for over 15 years,Packson can handle all kinds of mold including prototypes. We bring not only high skilled engineering...

Mardi 19 avril 2022

Precision mold components is a process that requires high technique and the use of precision molds and precision machines. The process of precision mould is different from normal injection mold but it still belongs to injection mold. It requires strict tolerance of ±0.01 mm and it...

Mardi 19 avril 2022

Overmolding mold is made of overmolding injection molding process which is a special injection molding process that can combine various materials into a single part. Through mechanical and/or chemical bonding of two plastic materials, the overmolding injection molding process can...

Mardi 19 avril 2022

Multi cavity mould is an injection mold that has more than one cavity. The shape of each cavity is the same. Multi cavity mold design is to produce multiples of the same part for high volume production since it means each production will produce a large number of finished parts. Multi...

Mardi 19 avril 2022

With more than 20 years of experience in injection molding, as the medical silicone molding company in China, we specialize in various molding process techniques including medical device plastic injection molding and medical silicone injection molding like LSR and solid rubber to...

Mardi 19 avril 2022

2k injection molding is one type of injection mold. It is also named as two shot molding, double shot molding, double-color mold, Multi-material, or multi-component injection mold. 2k injection molding consists of two different plastic materials and colors. With over 15 years mold...

Samedi 16 avril 2022

Quantité : 10-1000 pc - Prix : USD9,000 - USD 18,00

Zillion Techs SWIR camera is based on an in-house developed InGaAs detector with multiple resolutions. The compact GH-SW640-GigE meets requirements of high sensitivity in the SWIR range from 900nm to1700nm and with accompanied by extended wavelength from 400nm to 1700nm options...

Samedi 16 avril 2022

Quantité : 10 product - Prix : USD 30,000.00-700,00

Compared with the knife-up cutting machine, it has obvious advantages, no chips, no noise, low power, energy saving, no waste of raw materials, low cost and manual processing of burrs. It is the first choice for the upgrading of merchants' cutting equipment. The cut end of the pipe...

Samedi 16 avril 2022

Quantité : 10 product - Prix : USD 30,000.00-700,00

What is the Meaning of Auxiliary Equipment？ Plastic auxiliary equipment covers a wide range, from batch raw material processing and storage to mixing and metering, to the drying, packaging, storage and transportation of finished products. It is related to the operating efficiency...

Samedi 16 avril 2022

Hot cathode of 2 feet UV tube light, made of high quality quartz. The average rated life of uv tube light 2 feet is 9000 hours. Different diameter (T5,T6,T8) of lamp ,aluminum and ceramic bases can be chosen.The 254nm (UV output) was tested in the laboratory.Two types of 2 feet UV tube light...

Samedi 16 avril 2022

Product features: 4 pin uv lamp Product functions: water treatment sterilization, air sterilization, surface sterilization, microbial killing, photooxygen catalysis, photodecomposition, surface modification, etc. Main applications of 4 pin uv lamp Air sterilization, air purification...

Samedi 16 avril 2022

Quantité : 10 product - Prix : USD 30,000.00-700,00

Hopper dryer is the replacement product of standard hot air dryer, which is improved on the basis of the original function to fully consider the environmental factors. It can dry raw materials that are moist from packaging, transportation or recycling. In the processing of raw materials...

Samedi 16 avril 2022

HX Technology also offers PCB Finish Product Assembly and circuit board enclosure, including assembly with the outer shell and with a wire connector. With two custom circuit board enclosure lines and a specialized warehouse for raw material provided by customers, we will ensure your...

Samedi 16 avril 2022

HX electronic technology process specializes in manufacturing PCBAs using fully automated, we have the 6 SMT lines equip Fuji XPF SMT machine for surface mount (SMT) and 2 through-hole technology (THT) lines. HX electronic technology is uniquely positioned to take on large mass, medium...

Samedi 16 avril 2022

After every single detail of the electronic device has been finished for the design and engineering, we will prepare for production. The needed electronic components will be purchased from our reliable suppliers globally. First article, small, medium and large serial production are...

Samedi 16 avril 2022

Metal Tech is committed to the design, manufacturing, and distribution of Wire and Wire Mesh machines, including Wire Drawing Machine, Nail Making Machine, Screw Making Machine, Gabion Machine, Chain Link Fence Machine, Welding Mesh Making Machine, Barbed Wire Making Machine, Annealing furnace...

Samedi 16 avril 2022

Quantité : 1-100,000 - Prix : $1-$10

DF has an advanced CNC machining center, carving drilling machine, turning and milling machine, wire cutting, and other equipment. With these machines and experienced staff, we can repeat the positioning accuracy within the tolerance of 0.005mm, providing a strong guarantee for precision parts...

Samedi 16 avril 2022

Quantité : 1-100,000 - Prix : $1-$10

CNC refers to cutting material with a computer numerical control machine. The CNC machining process interprets your 3D CAD model and translates data to CNC machines. The main benefit of the process is that CNC will produce parts that can replace the additive manufactured prototypes...

Samedi 16 avril 2022

Types of vehicle clutch plate Suitable for Scania The application can transmit large torque, but the structure is complex, suitable for medium and heavy machinery. The friction clutch transfers torque by the friction torque on the working surface. As a professional clutch disc supplier...

Samedi 16 avril 2022

Types of Disc Brushes The disc brush is specially used to deal with the surface of metal, such as cast iron, aluminum, steel. Metal parts produced by cutting or die casting will inevitable have burr or flanging. If the burrs are not removed, it will lead to the accumulated errors...

Samedi 16 avril 2022

Types of Clutch Disc Suitable for Renault Renault The disc 2 is fixed on the driving shaft. The disc 3 is connected with the driven shaft by a flat key or spline, and can be moved axially on the shaft. The two discs can be pressed tightly by the spring 5. When working, Relying on...

Samedi 16 avril 2022

Types of Clutch Disc Suitable for Mercedes Benz The difference is that it can be engaged or disengaged at any time during the operation or parking process of the machine, and it is fast and reliable to achieve the intermittent operation of the transmission system for speed change and reversal...