TUNGSTEN - 880 Annonces

Vendredi 19 mars 2021

ROUGHING END MILL There are four carbide grades applied to general flat end mills: BT45, for milling materials of which hardness range from HRC45degree to HRC48degree, workpiece categories P, K, and softer stainless steel under M group in ISO classification. BT50, for HRC50 to HRC53degree...

Vendredi 19 mars 2021

The same as other end mills, there are flat end, corner radius end, and ball end. There are 2 flutes, 3 flutes, 4 flutes, and 6 flutes taper end mill. Different end and flutes are required by different machining situations. According to the included angle of the flute taper, there...

Vendredi 19 mars 2021

Step drill bit is a drill bit with steps in outer diameter, an advantage of which is one drill bit can replace more than one common drill bits to drill two or more different diameter holes according to the needs, and large holes can be drilled at one time without changing the drill...

Vendredi 19 mars 2021

Solid carbide rod is the most general shape of tungsten carbide blank material for cutting tools. And for cutting tools application, tungsten carbide grain size ranges from sub-micron to nano, because small tungsten carbide size enables the cutting tool with a very sharp cutting...

Mardi 02 mars 2021

TCI-bit-displayTCI-bit-display-2TCI-bit- displayTCI-bit-displayTCI-bit-displayTCI -bit-displayTCI-bit-display-2 Overview of TCI Bit Tricone bit is an important tool for oil drilling. When the cone bit is working, the cutting teeth alternately contact the bottom of the well, the rock...

Mardi 02 mars 2021

roller bit core barrel Overview of Core Barrel Roller Bit The roller bit core barrel uses high carbon steel and a special bit Angle to maintain drilling strength and efficiency. There are three types of core barrels: Core barrel with bullet teeth is used for cutting an annular ring...

Mardi 02 mars 2021

PDC Hole Opener Overview of PDC Hole Opener PDC Hole opener is designed for the enlargement of pilot holes and large hole applications. They are also used for road and river crossing applications. The hole opener is made of AISI 4145H fully heat-treated alloy steel. All products have...

Samedi 16 janvier 2021

Prix : 1000-6000USD

TAIYE, as one of the most professional drilling equipment manufacturers, provides customers with fine drill bits and they are all considered by many regular customers as the best drill and drill bit set. Different types of drill bits have different strengths in practice. According...

Jeudi 07 janvier 2021

Quantité : 10000 Piec - Prix : US$150-US$10,000

Overview of TCI Bit GREAT has a drill bit factory in place for producing tricone drills and high-quality Great Drill Bits. Tricone drills or tungsten carbide rock drill bits are an important tool for oil drilling. When the cone bit is working, the cutting teeth alternately contact...

Jeudi 07 janvier 2021

Quantité : 10000 Piec - Prix : US$150-US$10,000

Overview of Core Barrel Roller Bit Cangzhou Great Drill Bits Co.,Ltd. is one of the drill bit manufacturers in China. Its roller bit core barrel uses high carbon steel and a special bit Angle to maintain drilling strength and efficiency. There are three types of core barrels: - Core...

Samedi 14 novembre 2020

Prix : 100USD

Betalent carbide COOLANT DRILL BITS application and advantages: 1. It can be suitable for the drilling of complex materials, and can drill in a higher cutting speed. 2. Betalent carbide select the special high-performance helical hole cemented carbide rod as raw material to make...

Samedi 14 novembre 2020

Prix : 100USD

The cold heading die bears the heavy pressing load, and its female die surface bears high-pressure stress so that the die core material is required to have high strength, toughness and wear resistance, tungsten carbide with high cobalt content(Most grades applied to the heading die...)

Samedi 14 novembre 2020

Prix : 100USD

The advantages of Betalent carbide chamfer mill: A suitable negative front angle design is adopted, which takes into account the edge strength and sharpness. The large core diameter is adopted to enhance the rigidity of the end mill and make the cutting and chip removal more stable...

Samedi 14 novembre 2020

Prix : 100USD

Center finder drill bit is a common tool in machining, which plays an important role in actual production. The first application of center drill was to punch the center hole of shaft parts. With the increasing popularity of automation, it is more and more widely used in multi-functional...

Samedi 14 novembre 2020

Prix : 100USD

Cemented carbide material is a kind of alloy material which is made of hard compounds of an insoluble metal and binder metal by powder metallurgy process. Binder metals are usually iron group metals, commonly cobalt and nickel. The hardened phase is the carbide compound of transition...

Samedi 14 novembre 2020

Prix : 100USD

Carbide flats are referring the rectangular tungsten carbide rod, also known as tungsten carbide strips. It is produced by the same way as carbide rod, through powder(Mainly WC and Co powder as per formula) mixture, ball milling, spray tower drying, extruding, drying, sintering, (and...)

Samedi 14 novembre 2020

Prix : 100USD

Due to the high thermal conductivity of the cemented carbide, carbide roller has good heat dissipation, which shortens the time of the roll surface at high temperature, so the high temperature reaction time of the roll with the harmful impurities in the cooling water is short. Therefore...

Samedi 14 novembre 2020

Prix : 100USD

Carbide rod of which tungsten carbide grain size ranges from 0.2micron to 0.8micron, cobalt content ranges from 6% to 12%, hardness ranges from 91.4HRA to 95HRA. Carbide rod is the raw material to make cutting tools, such as end mills, reamers, turning tools, carbide planer cutters...

Mercredi 30 septembre 2020

PDC bit is Polycrystalline Diamond Compact bit ,it also named Diamond bit. According to the Material Classification： Matrix body PDC bit: It was made by tungsten carbide powder,and gauge protection is TSP. Steel body PDC bit: AISI 4145H heat treatment steel (America standard steel )...

Mercredi 30 septembre 2020

Great bits design and manufacture a wide variety of Matrix body PDC (polycrystalline diamond cutter) bits. Our PDC bits are offered in a variety of sizes, blade count and cutter sizes. The Matrix body PDC bit is sintered with tungsten carbide powder. Gauge protection with natural diamond...

Jeudi 24 septembre 2020

Quantité : 40 pieces - Prix : $42,000-357,000

TAIYE rock drill bit uses high-quality raw materials, advanced production technology and strict inspection methods to produce "Pangolin DTH" impactors and drills with excellent performance and quality. We provide pangolin DTH drill heads with diameters ranging from 90m to 305cm. Each...

Jeudi 10 septembre 2020

Prix : 0,50 €

PCD Cutting Tool Blanks E-Grind supplies the whole range of pcbn cutting tools. The largest Diameter available can be 55mm. Our PCD products provides high wearing resistance ability and high finishing surface. Our plant installs laser cutting machines and surface lapping and finishing...

Jeudi 10 septembre 2020

Prix : 0,50 €

E-Grind's Wheel Grit Diamond Series is the crystal type with yellow color and high transparency and low impurity content. It provides premium performance in impact toughness, static pressure strength, and thermal stability. Wheel Grit Diamond: EA-F280 Perfect cube-octahedral shape...

Mardi 08 septembre 2020

Some people also call sand blasting machines, sand blasting tank, portable sandblaster, open sandblasting machines and so on. The names are different, but they actually have the same meaning. Can working separated, but in most case it work with shot blasting room. Power loss of shot...

Mercredi 02 septembre 2020

Les tiges de tungstène ont des propriétés spéciales, telles qu'une faible dilatation thermique et une bonne conductivité thermique, une résistance suffisante à la résistance électrique et un module élastique élevé. Par conséquent, les tiges de tungstène sont largement utilisées dans...

Mardi 01 septembre 2020

Prix : 1 000,00 €

Overview of TCI Bit Tricone bit is an important tool for oil drilling. When the cone bit is working, the cutting teeth alternately contact the bottom of the well, the rock breaking torque is small, the contact area between the cutting teeth and the bottom of the well is small, the...

Mardi 01 septembre 2020

Overview of Core Barrel Roller Bit The roller bit core barrel uses high carbon steel and a special bit Angle to maintain drilling strength and efficiency. There are three types of core barrels: Core barrel with bullet teeth is used for cutting an annular ring in rock or concrete(also...)

Mardi 01 septembre 2020

Prix : 1 000,00 €

Overview of PDC Hole Opener PDC Hole opener is designed for the enlargement of pilot holes and large hole applications. They are also used for road and river crossing applications. The hole opener is made of AISI 4145H fully heat-treated alloy steel. All products have carbide grinding...

Vendredi 31 juillet 2020

Quantité : 8000kgs - Prix : USD0.025 - USD1.05

What is PCD wire drawing dies used for? The diamond wire drawing die blank is made by sintering diamond micropowder under the action of various metals (containing cobalt) catalysts using ultrahigh temperature and ultrahigh-pressure processes. During the sintering process, high-strength...

Vendredi 31 juillet 2020

Quantité : 8000kgs - Prix : USD0.025 - USD1.05

industrial diamond dust has the characteristics of high thermal stability, high chemical stability, good conductivity, good physical properties (high compressive strength, good heat dissipation, strong corrosion resistance, low thermal expansion rate) and so on. It has high hardness...