OBTAINED - 1212 Annonces

Vendredi 19 mai 2023

Prix : USD1000

CNG Plant Complete Flow Chart of a Flare Gas Recovery Unit CNG Compress Unit Rich methane gas meets with rich gas ethane reheated by cooling heat exchanger, this steam of gas flows through the CNG compressor to increase pressure to 25Mpag, CNG product can be obtained. The compressor...

Mercredi 17 mai 2023

Wholesale Spray Paint As the aerosol car paint suppliers, Shenzhen Sunrise New Energy Co., Ltd is well known for manufacturing and exporting industry-leading aerosol spray paints and car care products since 1995. Besides, we could offer a spray paint custom service for customers....

Mercredi 17 mai 2023

1. What is PTC thermistor? PTC thermistor (Positive Temperature Coefficient Thermistor) is a temperature-sensitive semiconductor resistor. Once it exceeds a certain temperature (Curie temperature), its resistance value increases almost stepwise with the increase of temperature. The...

Mardi 16 mai 2023

TD-CHZ16 protector integrates intelligent control functions such as over-current and short-circuit protection, under-voltage/over-voltage protection, leakage protection, remote communication management/fault memory, detection before closing, and automatic reclosing device. The new...

Mardi 16 mai 2023

A fire door is usually installed in the emergency exits of buildings to reduce the spread of fire and smoke between separate compartments. The material of our fire proof doors for sale is steel panel and rock wool core. As a professional fire resistant door manufacturer/company, Xinyi...

Vendredi 12 mai 2023

The series of PP pipe extrusion machine lines mainly extruded production: MPP power pipe, PPR, Pert, PEX, cold & hot water pipe, RB, PO, MULTI-LAYER PPR / PE Composite pipe. The pipe made by this PP pipe extruder line is widely used for water supply and radiate floor heating in house...

Vendredi 12 mai 2023

PP blow moulding machine is a product formed by a rapidly developing plastic processing method. Use PP plastic to extrude one-time blow molding. During production, the PP plastic is extruded into a tubular plastic parison, which is placed in a mold while it is hot, and compressed...

Vendredi 12 mai 2023

POY spinning machine adopted Newly designed Spin-Beam with less energy consumption by 30% compared with conventional ones. Adopted Bottom mounted spin packs with better melt flow, better temperature evenness and less manpower required. New type of poy machine quenching system providing...

Jeudi 11 mai 2023

AneSure-Mini can simultaneously measure anesthetic gas, ETCO2 and respiratory rate. Suitable for Emergency, Pre-hospital and Intra-hospital transport, Operating room as well as ICU. Features of AneSure Portable Anesthesia Multi-gas Monitors-AneSure™ Mini 01. Portable And Lightweight...

Jeudi 11 mai 2023

As a technology-based company, we have been focusing on developing and innovating carbon dioxide modules and monitors for more than 20 years. And we have been promoting etco2 series modules and cooperating with many well-known medical companies since 2008. Our products have obtained...

Jeudi 11 mai 2023

The full-black modules developed by Sunrise adopt the industry's unique ribbon horizontal extraction technology. The process quality has passed the special test of TUV authority, and obtained the invention patent of 'Full-black Modules'. Full Black Crystal Solar Panels For Sale N-type...

Mercredi 10 mai 2023

Quantité : 500 units - Prix : 8000-15000USD

Hyperbaric chamber is divided into monoplace oxygen chamber and multiplace oxygen chamber according to the different number of people treated in the chamber. It is divided into soft type hyperbaric chamber and hard type hyperbaric chamber according to the their different materials...

Mardi 09 mai 2023

Slewing Bearing Without Gear, SWBTEC slewing bearings without gear usually include ball contact type and crossed roller type. Dimension is from 80mm-2500mm, and the material is 50Mn&42CrMo4. A slewing bearing without gear is widely used on many machines too, like rotators, package...

Dimanche 07 mai 2023

Quantité : 100k - Prix : $0.005-$3.4

Greenconn connector is a connector manufacturer that has obtained the IATF16949 certification for automotive connector production. We provide products of high precision and mechanical strength, which can be applied in applications that encounter various harsh environments. Greenconn...

Samedi 06 mai 2023

Prix : 100USD

The material is obtained by grinding the coarse powder (D50 is 13 micron ~ 75 microns) . It can be used as moulding material, spraying material and composite modified pre-dispersion. Types of Grade PF PEEK Pure Resin Fine Powder ZYPEEK Supplier PF Series-770PF PEEK Pure Resin Fine...

Samedi 06 mai 2023

Prix : 100USD

The traditional shock test (also known as the classic shock test) mainly simulates the actual shock environment by the shock effect produced by a simple pulse. This method has great limitations, there is a trend to be replaced by shock response spectrum (SRS) standard srs test. The...

Samedi 06 mai 2023

Reliability, Reliability, and Reliability. This is what all maintenance teams will focus on in the chemical plants, reliability can be easily obtained through EAMic® CMMS: System embedded failure analysis report, ultra red and vibration pen (equipment temperature and vibration data...)

Samedi 06 mai 2023

Prix : 100USD

The traditional shock test (also known as the classic shock test) mainly simulates the actual shock environment by the shock effect produced by a simple pulse. This method has great limitations, there is a trend to be replaced by shock response spectrum (SRS) standard srs test....

Vendredi 05 mai 2023

Quantité : 200,000/mo - Prix : 20USD-200USD

Beoka NOTE 6 professional sports recovery massage gun is welcomed by the customers for the following features: - Medica-grade: This body sports massage gun is a medical-grade massage gun. It has 9 second-class medical device registration certificates. - Enough Quality Assurance...

Samedi 29 avril 2023

Ginger extract powder is extracted from the root of ginger by CO2 Extraction. Ginger is a kind of medicinal and edible plant with a wide range of uses. The ginger original juice also has very good antioxidant properties and can be used to prevent oxidative rancidity of meat products...

Vendredi 28 avril 2023

Name: Trimethylchlorosilane Feature: Trimethyl chloro silane is a colorless or light yellow transparent irritating liquid. Trimethylchlorosilane CAS NO.: 75-77-4 Technical Data of Trimethylchlorosilane Testing Items Testing Standards Trimethylchlorosilane /% ≥ 99.5 Methyltrichlorosilane...

Vendredi 28 avril 2023

HTV quality or high-temperature vulcanized silicone rubber is used in the compression molding press. Special silicone rubber materials are chosen based on their intended use, whether they need to be fire, oil, or heat resistant. Food and medical qualities have FDA and BFR approvals...

Vendredi 28 avril 2023

Delta Robot Definition With competitive delta robot cost and price, bat series delta robot has great advantages in operational applications like fast grasping and sorting as well as programming. Due to the fine delta robot parts, its positioning accuracy is superior, and its re-positioning...

Jeudi 27 avril 2023

chemical inventory management software chemical asset management software Reliability, Reliability, and Reliability. This is what all maintenance teams will focus on in the chemical plants, reliability can be easily obtained through EAMic® CMMS: System embedded failure analysis report...

Samedi 22 avril 2023

History & Evolution CHICOLINK JEWELRY is an exported-oritened enterprise,engaged in the sale and production of 316L Stainless Steel Fashion Jewellery for Men,Women & Kids,also experienced supplier for Metal Part for Bag Accessories. We provide guaranteed service,good pricing...

Jeudi 13 avril 2023

Quantité : 30-40sets/ - Prix : USD3000-200000

2K Molds The rotary mold is composed of two-cavity and core sides, the two core sides are the same, only the cavity sides is different which the second color cavity is bigger than the first color, at the beginning of injection molding, the barrel of the two-color injection molding...

Mercredi 12 avril 2023

Quantité : 1000t/m - Prix : 2-15 USD

Using Polyamide 66 as the basic resin, the tensile strength of nylon 66 is obtained by blending and modifying with the addition of a toughening agent. The flexural strength, abrasion resistance and creep resistance of Nylon 66 are very outstanding. What is the pa6 tensile strength of nylon...

Mercredi 12 avril 2023

Superlead scanner has been focusing on the innovation of QR code and vision inspection equipment for many years. We are China bulk barcode scanner wholesale manufacturer. After years of development, we have formed our own core technology, obtained 27 invention patents, 10 utility...

Samedi 08 avril 2023

bulk organic potato starch is obtained by pulverizing, filtering, and precipitating organic potatoes, and drying the obtained precipitate. Pekhill has a stable supply chain of organic raw materials and advanced processing technology. APPLICATIONS OF ORGANIC POTATO STARCH: In confectionery...

Vendredi 07 avril 2023

Haisan as a amusement park equipment suppliers south africa Haisan water park equipment has a high market share in the world, and which investors are keen to choose. Haisan has one of the world's largest water park equipment manufacturing base covering 120,000 square meters integrated...