BOTTLE&METAL - 17117 Annonces

Jeudi 06 juillet 2023

The drying systems are used at the end of the metal printing press and coating production lines in order to improve the print quality and yield. The drying system line from the conveyor, feeding device, drying, cooling, unloading, accumulation. The main heating energy of our China...

Jeudi 06 juillet 2023

The production line monitoring technology is suitable for metal decorating printing and coating production line, which greatly improves the yield and reduce metal sheets waste. Metal sheets are an expensive material and early detection of damaged coating and contaminated margin reduces...

Jeudi 06 juillet 2023

Metal heat transfer thermal oxidation device（TNV） is used to purify industrial waste gases containing high concentrations of organic pollutants, The system is characterized by a very high utilization rate of heat in system. Combined with a downstream heat recovery system, the unit...

Jeudi 06 juillet 2023

Fully automatic metal coating is the essential process for anti-rust and brightness effect before and after printing for metal sheets made of tinplate, aluminum and steel. Perfect evenness and ergonomic design of metal decorating printing wins 100% customer satisfaction in cost efficiency...

Jeudi 06 juillet 2023

Prix : USD0.1-15

If you're looking for an economical, efficient way to route a few cables in retrofitting, nail type cable clamp is the product you need. We carry a large range of sizes of cable nail clips, of different kinds. You will find cable clamp nails easy to install on the surface, such as wall...

Jeudi 06 juillet 2023

Prix : USD0.1-15

3 to 1 shrink tubing using high-quality polymers, scientific formula, mechanical co-mixing polymer alloy, product molding after the electronic accelerator irradiation crosslinking, continuous expansion. heat Shrink tubing 3 to 1 products with environmental protection, soft, flame retardant...

Jeudi 06 juillet 2023

Soxi is one of the top plastic material dryer manufacturers , our plastic dryer machine will avoid the following questions. In the plastic machinery equipment, the plastic in the resin state easily absorbs moisture from the air. In another word, the moisture absorbed during storage...

Jeudi 06 juillet 2023

INDUSRIAL CHILLER MACHINE BY SOXI Soxi is one of the top industrial chiller machine manufacturers in China. Industrial water chiller system plays an important part in the plastic moulding process, injecting frozen water into the flow channel inside the mold, cooling the mold through...

Jeudi 06 juillet 2023

Industrial Needle Punched PET Spunbond Non-Woven Fabric Industrial PET spunbond non-woven fabric has excellent physical and mechanical properties in a wide temperature range. The long-term use temperature can reach 120°C. The electrical insulation of the polyester spunbond nonwoven...

Jeudi 06 juillet 2023

Oral medicine syringes, called mouth syringes, are applied to dispense liquid solutions and suspensions. Disposable oral syringes can be used to give almost any medication available as a capsule or tablet as an oral liquid. Oral dosing syringes are also useful for gradually increasing...

Mercredi 05 juillet 2023

Quantité : 1000kg - Prix : 400-800

Peek Bearing Material Due to its excellent mechanical strength, dynamic fatigue resistance, high-temperature resistance, creep resistance, self-lubrication and thermal expansion coefficient comparable to metals, peek bearing material is replacing more metals and other engineering...

Mercredi 05 juillet 2023

Quantité : 1000kg - Prix : 400-800

Peek Material Applications Natural peek material has excellent comprehensive properties and can replace traditional materials such as metals and ceramics in many special fields. PEEK compound has applications in mechanical engineering, aerospace, automotive industry, medical, electrical...

Mercredi 05 juillet 2023

As GreensTone CEO said, GreensTone has over 10 years of experience in the China turn key pcb assembly industry. Our core values are centered around customer service, engineering, manufacturing, and product solutions. In the beginning, we gained a stellar reputation through China...

Mercredi 05 juillet 2023

SMT PCB Assembly As SMT assembly supplier, GreensTone SMT production runs with automated SMT production processes, including single or double-sided component insertions. STM components include passive Component: components as small as 01005, 0201,0402. ICs like BGA: handle BGA of 0...

Mercredi 05 juillet 2023

Sheet metal is used to make objects of various thicknesses, from very thin sheet metal to sheet metal with a thickness greater than 6mm. Sheet metal fabrication is a subtractive process that forms metal sheets to the desired shape by using a variety of manufacturing methods. Sheet...

Mercredi 05 juillet 2023

Which Mold do you want to do? Plastic Injection/die casting or punch mold, etc. Which Mould Material do you want choice? 45#, 50#, P20, H13, 718, 2738, NAK80, S136, SKD61, etc. Which does the Product Material want? PP, PC, PS, PE, PU, PVC, ABS, PMMA, etc. How many Cavities? Single/Multiple...

Mercredi 05 juillet 2023

Varistors, also known as voltage-dependent resistors, are used as part of surge protective devices (SPDs). Varistors are designed to provide protection against transient overvoltages by limiting the voltage across the device to a safe level. Varistors are usually composed of sintered...

Mercredi 05 juillet 2023

A PBT arrester core is a type of arrester surge protector that is designed to help protect a system from electrical surges. It is typically made from a polybutylene terephthalate (PBT) material, which is a type of thermoplastic. The PBT arrester core works by absorbing the energy...

Mercredi 05 juillet 2023

MOV stands for Metal Oxide Disc Varistor . It is a type of surge arrester that is used to protect electrical systems and equipment from overvoltage transients. It consists of a metal oxide material that acts as a voltage-dependent resistor, which limits the voltage across the device...

Mercredi 05 juillet 2023

It is a type of overvoltage protection device that is commonly used in DC arresters. It works by diverting excess current away from the protected circuit and dissipating it as heat. This prevents the circuit from being damaged by excessive voltage. MOVs are typically made from a combination...

Mercredi 05 juillet 2023

MOV Blocks MOV varistor datasheet, also called as Zinc oxide varistor or Energy block is the heart of arresters. TGE can produce AC, DC, and high gradient MOV, a wide range of products to meet the technical needs of 1-1100kV MOA and SPD, The annual MOV (also called zinc oxide blocks...)

Mercredi 05 juillet 2023

To safeguard electrical equipment from transient overvoltages, power substations frequently employ metal-oxide varistor zno (MOV) surge arresters. MOVs are made to deflect excess current away from the device they are safeguarding in order to limit the voltage to a safe level. Types...

Mercredi 05 juillet 2023

TGE developed D36 D42 series glass coating ZOV MOV which be suitable for distribution arresters according to IEC60099-4 (2014) in 2018. Based on the proven technique of high-performance metal oxide zov varistor, a special new type of metal oxide varistor basics can be used in heavy-duty...

Mercredi 05 juillet 2023

High Gradient MOV (mo varistor) GIS Arresters are surge arresters designed specifically to protect sensitive GIS (Gas Insulated Switchgear) equipment from power surges. The arresters contain a unique combination of metal oxide varistors (MOVs) that are specifically tailored to the application...

Mercredi 05 juillet 2023

Arrester core is a type of electrical equipment used to protect electrical systems from damage due to lightning strikes or other forms of electrical surges. It consists of a metal core surrounded by an insulating material. The MOV core absorbs the energy of the surge, preventing it...

Mercredi 05 juillet 2023

Welcome to the world of 35kV Duriton Core, the most advanced arrester core in the industry. Our 35kv surge arrester core is made with superior-quality metal oxide varistor (MOV) material to ensure maximum protection, reliability and durability. The Duriton Core is ideal for applications...

Mercredi 05 juillet 2023

Quantité : 130-140 To - Prix : USD 1.5-6.0 / kgs

2In addition to the good physical and chemical properties of ordinary film, Hesun devotes to developing and researching special-purpose applications, successfully turning out a series of functional films to meet different industrial demands, including released film, super gloss film...

Mercredi 05 juillet 2023

Quantité : 1200sets/y - Prix : USD10000-200000

CNC Die Sinking EDM Machine For Sale As a professional CNC Die Sinker EDM Machine manufacturer, we aim at providing you erosion machines with high quality. EDM sinker for sale is waiting for your contact with a warm welcome. We are available if you have any questions about spark...

Mercredi 05 juillet 2023

Prix : $0.02~$0.40 per piec

The coated stainless steel cable tie has an automatic locking function, it is resistant to wear, corrosion, and fire. The reusable coated stainless steel wire cable ties produced by SAICHUANG, one of the most professional coated stainless steel cable tie supplier, are not easy to loosen...

Mercredi 05 juillet 2023

Prix : $0.02~$0.40 per piec

As a professional plastic cable tie manufacturers. Our zip/plastic cable ties factory provide reusable cable ties, which is used to bundle cables and wires to keep them organized and secure. Cable tie wraps are fast tying, good insulation, self-locking fastening, and convenient to use...