P460Q|P460QH|P460QL1|P460QL2|PRESSURE - 13358 Annonces

Mardi 04 avril 2023

Prix : 100USD

China UTMOST Valves for Coal Chemical Industry The coal chemical industry is an industry that uses coal as raw material and converts coal into solid, liquid, and gas fuels and other chemicals through chemical processing. As the core application component in the coal chemical industry...

Mardi 04 avril 2023

Prix : 100USD

China Trunnion Mounted Ball Valve As a trunnion mounted ball valve factory, UTMOST provides high quality trunnion style ball valve with ball valve trunnion service. The rear of the steel ring is equipped with a spring to ensure that the pressure ball valve seat is tightly attached to the ball...

Mardi 04 avril 2023

Prix : 100USD

Utmost U529 series smart valve positioner adopts the newest advanced micro processing and intelligent measurement and control technology, based on 3 / 3 slide nozzle baffle valve and solenoid valve technology, with single and double-acting, Hart, remote transmission, flameproof, explosion-proof...

Mardi 04 avril 2023

Prix : 100USD

G110/G150 Series China Single Seat Control Valve Straight through control valve is widely used in the precise control of gas, liquid, and other media, and the process parameters such as pressure, flow, temperature, and liquid level are kept at a given value. The single seat control...

Mardi 04 avril 2023

Prix : 100USD

A self operated control valve, also known as a self actuated temperature control valve or self actuated pressure control valve, is an auto control valve that relies on the pressure and temperature of the medium flowing through the valve as an energy source to drive the self actuated...

Samedi 01 avril 2023

Prix : USD0.1-15

A mould trial is a process by which a new mould is optimised in order to produce the desired products as efficiently as possible. This makes it one of the most important aspects of injection moulding. DETAIL OF TRIAL MOLDING Trial Molding Process Set barrel temperature according to...

Samedi 01 avril 2023

HanKing Mould serves global Automotive & Vehicle products customers, more than 10 years of experience enabling the HanKing team to provide customers the fast development time and stable quality to ensure the new project running well. HanKing engineer will analysis the filling...

Samedi 01 avril 2023

High pressure with the special double-cutting design of the cutters makes the cutting more efficient and keeps the cutter service time longer.Independent emergency stop button and European safety standard of the machine ensure the safe operation. Pressure: 150tons Power: 22kw Baling...

Samedi 01 avril 2023

This product is mainly used to cut the materials like different kinds of rubber, plastic, plastic film etc. into small pieces so that they can be handled moreeasily. Whole system manual control makes sure the durability and simple operation. Pressure: 80tons Power: 15kw Baling Chamber Height...

Samedi 01 avril 2023

XTY-300LE11070 is specially designed for cardboard, carton, newspaper, soft plastic film etc. with wide feed opening door. The wide feed opening door will lift upwards automatically when the platen goes up. The operation is very convenient. Pressure: 30tons Feed Opening Size (L*H)...

Samedi 01 avril 2023

XTY-1500LF11042 is equipped with a special door design: the front and back doors can opentogether for convenient strapping.Independent feed opening and automatic bale out design make the operation more simple and easy. Pressure: 150tons Feed Opening Size (L*H): 1100*1400mm Baling Chamber Height...

Samedi 01 avril 2023

SX-200LA8060 is another model which is popular among many customers because it can be single phase which is very necessary in some areas. Bottom liquid receiver is optional for collecting the liquid from the compressing materials. Pressure: 20tons Feed Opening Size (L*H): 700*400mm...

Samedi 01 avril 2023

XTY-600LE180100 is equipped with high-quality configurations all which help make long lifespan of the machine. NOK seal from Japan means longer lifespan of the seals. Japan A.M.C. oil pipe joint prevent the machine from oil leakage problems. Less space is needed for installation with...

Samedi 01 avril 2023

Particular cutter design with double cutting enhances the cutter working efficiency and lifespan. The Taiwan imported hydraulic valves of high quality are used to keep the stable running of the machine. Pressure: 100tons Main Motor Power: 30kw Cooling System: air cooler/water cooler...

Samedi 01 avril 2023

Kneading Screw Elements Manufacturer Kneading Element Diameter: φ20 mm ~φ300 mm Kneading block Properties: Wear-resisting, Corrode-resisting, Durable The conveying screw element is self-sweeping type, open longitudinally and closed laterally, which has strong conveying effect. Short...

Vendredi 31 mars 2023

Galvanizing line tension leveller is a continuous stretching bending straightening machine that is used in the continuous hot-dip galvanizing line. Combining the characteristics of continuous tension metal straightener and roller straightener, the strip is straightened by plastic...

Mercredi 29 mars 2023

Galvanizing line tension leveller is a continuous stretching bending straightening machine that is used in the continuous hot-dip galvanizing line. Combining the characteristics of continuous tension metal straightener and roller straightener, the strip is straightened by plastic...

Mercredi 29 mars 2023

Scale Breaker Scale-breaking tension leveller, also called scale breaker, is generally used for continuous pickling units. Scale breaker machine applies to bend stress to strip steel. The front and rear bridle roll applys tensile stress to the strip; Under the coordination of these two stresses...

Mercredi 29 mars 2023

Rewinding line and recoiling lines will encounter the problem of strip skidding during the actual usage which can lead to production barriers like strip deviation, at the meantime, coil processing lines can affect the security of production equipment. With the pressure roller, tension...

Mercredi 29 mars 2023

BOYA multi-roll leveler is the core equipment of finishing process in metallurgical hot and cold rolling mill. By repeatedly bending and convex straightening of the strip, the strip can be straightened with high strength and precision; Widely used in high strength steel, precision steel strip...

Mercredi 29 mars 2023

Quantité : 500 Sets/M - Prix : $1000-200000

In the inspection process of electronic components, the PCB seamark x ray inspection machine can be directly connected to the SMT production line for high-capacity automatic inline full inspection, it can be used offline with unloader and loader. PCB welding x ray machine price is...

Mercredi 29 mars 2023

OVERVIEW OF ALLOY STRUCTURAL STEEL Alloy structural steel are the type of steels formed by adding different proportions of alloying elements like manganese, chromium, nickel, molybdenum, vanadium, the addition of which is to enhance the mechanical and physical properties within...

Mercredi 29 mars 2023

Minimum Opening Angle 23° Maximum Turning Angle 90° Maximum Temperature 95°C Lever Break Torque ≥12N.m Tightening Torque 8-10N.m Specification of 35D-11 35mm Side-outlet Cartridge with Distributor Pressure VS Average Flow Rate P. (bar) 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 F...

Mercredi 29 mars 2023

Minimum Opening Angle 23° Maximum Turning Angle 100° Maximum Temperature 95°C Lever Break Torque ≥12N.m Tightening Torque 8-10N.m Specification of 35D-10 35mm Side-outlet Cartridge Pressure VS Average Flow Rate P. (bar) 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 F. (I/min) 7.5 10.5 12.7 14...

Mercredi 29 mars 2023

Minimum Opening Angle 21° Maximum Turning Angle 100° Maximum Temperature 95°C Lever Break Torque ≥6N.m Tightening Torque 6-8N.m Specification of 26H-11 26mm Side-outlet Cartridge with Distributor Pressure VS Average Flow Rate P. (bar) 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 STEP 1 ? F...

Mercredi 29 mars 2023

Minimum Opening Angle 21° Maximum Turning Angle 100° Maximum Temperature 95°C Lever Break Torque ≥6N.m Tightening Torque 6-8N.m specification of 26H-10 26mm Side-outlet Troque Cartridge Pressure VS Average Flow Rate P. (bar) 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 F. (I/min) 11...

Mercredi 29 mars 2023

Minimum Opening Angle 21° Maximum Turning Angle 100° Maximum Temperature 95°C Lever Break Torque ≥12N.m Tightening Torque 8-10N.m Specification of 25H-1 25mm Low Torque Cartridge with Distributor Pressure VS Average Flow Rate P. (bar) 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 F. (I/min) 7...

Mercredi 29 mars 2023

Quantité : 1200sets/y - Prix : USD10000-200000

General Purpose CNC EDM Wire Cut Machine F Structure DK77 series high speed wire cut EDM has non-resistors HF power with Max cutting speed higher than 300mm2/min, Max cutting thickness is higher than 1000 mm. High accuracy linear guide way, ball screw and strong machine body with...

Mercredi 29 mars 2023

Minimum Opening Angle 21° Maximum Turning Angle 100° Maximum Temperature 95°C Lever Break Torque ≥12N.m Tightening Torque 8-10N.m Specification of 25D-1 25mm ceramic disc cartridge Pressure VS Average Flow Rate P. (bar) 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 F. (I/min) 5...

Mercredi 29 mars 2023

Wanhai not just focus on the life time , but also the balance for each sector : the tighness , movement torque, the pressure resistance and flow rate which bring the final customer better experience with different mixer cartridge types . Advantages of Wanhhai Faucet Cartridge Types...