MOLD|FILTER - 8165 Annonces

Mercredi 22 juin 2022

Prix : 100USD

Large Metal Spinning Spinning in sheet metal belongs to the processing of local continuity, the instantaneous deformation zone is small, and the total deformation force is small. Some parts with complex shapes or materials that are difficult to deform are difficult or even impossible...

Mercredi 22 juin 2022

Prix : 100USD

Stretch forming is a technology to stretch the mental into different shaped mental parts. It also will improve the structure of the unloading part of the forming mold, which can automatically unload the parts under the action of the spring. As one of professional stretch forming companies...

Mercredi 22 juin 2022

Quantité : 100000 - Prix : 60~3000USD

Manual Dosing Pump Introduction Of Manual Metering Pump The flow rate of the manual chemical pump is constant and can be manually adjusted. The flow rate is adjusted according to the external analog signal, digital pulse signal (such as pulse signal from water meter) and RS485 communication...

Mercredi 22 juin 2022

Prix : 5000USD-30000USD

Custom Mold & Design The overmolded parts is a process that can bond different materials by the injection moulding. Plastic injection overmolding in HanKing is a technology to combine two different moulds while we called the combination of different resins in one mould as two-shot...

Mercredi 22 juin 2022

Prix : 5000USD-30000USD

A multi cavity mold can be understood, obviously referring to mold with multiple cavities. The multi 8 cavity mold comprises a multi-cavity of the same plastic part and a multi-cavity of different plastic parts. The use of multi-cavity molds for plastic injection molding of plastic...

Mercredi 22 juin 2022

Prix : 5000USD-30000USD

Injection Parts Medical HanKing has an experienced team focusing on making injection moulds and molded components for medical parts, medical instruments, medical devices, medical housing and laboratory products. Customers only need to send the part drawing to us, we will deliver quality...

Mercredi 22 juin 2022

Prix : 5000USD-30000USD

Insert Molding Technologies for Automotive Industry Mould Type: Automotive Sensor Plastic Injection Mould Production Material: Nylon PA66 No of Cavities: 4 cavities Core Material: S7 Cavity Material: S7 Mold base steel: 1.1730 with A/B plate 1.2312 Injection System: Cold runner Type of gating...

Mercredi 22 juin 2022

Prix : 5000USD-30000USD

What is medical insert molding? Insert molding tooling refers to a molding process in which an integrated product is made by inserting a pre-prepared metal material insert into a mould and then injecting the plastic resin, and the molten material is bonded to the insert, cooled and solidified...

Mercredi 22 juin 2022

Prix : 5000USD-30000USD

Industrial mould is not a mold technology process, but a type of mold that is distinguished from the purpose of use. Generally speaking, products produced with industrial moulds are used for processing or business operations, such as industrial instruments, valves, fittings, , tools, etc...

Mercredi 22 juin 2022

Quantité : 1200sets/y - Prix : USD10000-200000

ZNC EDM Sinker has X and Y-axis manual control, and Z-axis automatic control. It can do one single job after manually set position, and job setting is also manual. Ideal for molds and spare parts manufacturing industries, ZNC edm die sinker product for sale by DMNC is your best...

Mercredi 22 juin 2022

Quantité : 1200sets/y - Prix : USD10000-200000

Our edm hole drilling machine for sale are designed for the highest levels of accuracy, incredible reliability and high quality. Increasing productivity and saving time, small hole die sink edm machine provided by us is your best choice for drilling small hole. Come and contact...

Mercredi 22 juin 2022

Quantité : 1200sets/y - Prix : USD10000-200000

DK77 series cnc high speed wire cut edm has non-resistors HF power with Max cutting speed higher than 300mm2/min, Max cutting thickness is higher than 1000 mm. High accuracy linear guide way, ball screw and strong machine body with good rigidity to make sure good performance of cutting accuracy...

Mardi 21 juin 2022

ERW pipe means electric resistance welded pipe, and it is a resistance welding by 10-500 kHz of high-frequency current. The raw material of the erw welded steel pipe is hot rolled steel coil made of steel billet, and the usual material is Q195, Q215, Q235, Q355 in China ERW pipe grade...

Mardi 21 juin 2022

Quantité : meter - Prix : 0,20 €

Nylon is a synthetic material which is the most used material in the market today. It is capable of being extruded into strands of various sizes and thicknesses to suit different applications. Our nylon filter mesh is woven by monofilament yarns, the key properties of nylon filter mesh include...

Mardi 21 juin 2022

Quantité : 1000 pcs - Prix : 200-2000

Residential Ceiling ERV/HRV 218 With HEPA System-AG Series Thenow residential ceiling mounted energy recovery ventilator-HEPA Series added HEPA filters after G3 or F7 filter which can prevent the fine particles high efficiently. We have a completely range of energy recovery ventilation...

Mardi 21 juin 2022

Quantité : 1000 pcs - Prix : 200-2000

Constant fresh air in your home is an important aspect to maintain the indoor air quality. A good ventilation system will protect your family from unpleasant odos and harmful contaminants such as formaldehyde and VOCs. Opening window is a simply way to increase esp ventilation,...

Mardi 21 juin 2022

Quantité : 1000 pcs - Prix : 200-2000

Residential Humidity Control System Nowadays, the standards of people's living are improving, not only to install air-conditioning, floor heating, and better-conditioned homes,but also to install ventilator, dehumidification and other equipment. A person with insights who is more...

Mardi 21 juin 2022

Automotive parts mold features: 1. The part material is made by PP-TD20 normally, the part surface will make leather texture which is very high, and he product surface is not allowed to have thimble marks, gate marks, sink marks, welding marks and flash or any other defects; 2. The...

Mardi 21 juin 2022

Engine Coolant Pipe Gas-assisted plastic injection moulding equipment mainly includes nitrogen generators, superchargers, gas-assisted controllers, nitrogen storage cylinders, air intake components, gas recovery devices, molds, and injection molding machines. The function of the nitrogen...

Mardi 21 juin 2022

Plastic Pipe Mold The gas-assisted controller is used to control the pressure of nitrogen to the mold at different times, the controller is divided into a single air circuit, double air circuit, and four air circuits, each gas path can be individually controlled in terms of injection...

Mardi 21 juin 2022

8 Cavity Mold USM as a medical plastic injection mold supplier provides products including medical device plastic parts, suction tips, blood collection devices, pregnancy test sticks, culture tubes, ventilator masks, etc. If you want to know more types of shot glass mold silicone...

Mardi 21 juin 2022

4 Cavity Injection Mold The multi-cavity mold can save production time, for example, one mold can produce 1 piece of part in one minute, but it can be produced 32 pieces of parts in one minute if we make a 32-cavity mold. Multi cavity mold requires very high machining accuracy. If...

Mardi 21 juin 2022

32 Cavity Mold In terms of multi-cavity molds, we pay attention to the design of layout and runner filling balance, which is also the key to the success of multi-cavity molds. Product material: ABS material in medical-grade Mold steel: S136 HRC 52-54 Mold life: 1 million Hot runner brand...

Mardi 21 juin 2022

The rotary mold is composed of two-cavity and core sides, the two core sides are the same, only the cavity sides is different which the second color cavity is bigger than the first color, at the beginning of injection molding, the barrel of the two-color injection molding machine...

Mardi 21 juin 2022

Electronic parts 2k Electronic Drip Tip Mold advantages: 1. It can be produced very precise products; 2. The injection molding cycle is short, suitable for large-volume products; - Good product consistency and low defect rate. If you need high quality plastic moulding services, please...

Mardi 21 juin 2022

16 Cavity Mold This mold will use 4 pin-points hot nozzles for gating, and one nozzle will control 4 pieces of parts gating in order to achieve filling balance. Product material: PP material in medical-grade Mold steel: S136 HRC 52-54 Mold life: 1 million Hot runner brand: mold master Mold base...

Mardi 21 juin 2022

In the non-woven fabric industry, there are many types for customers to choose from and the non-woven polypropylene filter fabric is one of the most commonly used ones. It is characterized by its excellent filter capability and strong absorption property. Different kinds of polypropylene...

Mardi 21 juin 2022

Non-woven polypropylene fabric, or the so-called PP non-woven fabric, is a non-toxic, odorless, milky white highly crystalline polymer. It is one of the lighter types of plastics, with low water absorption and good form-ability. The surface of the non-woven polypropylene fabric...

Mardi 21 juin 2022

Non woven Filter Cloth This PET non woven drainage fabric can be used for gas and liquid filtering materials. Because the fiber fineness can reach 0.75d, a more uniform fiber distribution can be obtained, and the filtering effect of this series is also better. Specification of Non-woven...

Lundi 20 juin 2022

Quantité : 1 - Prix : 1,00 €

- Fuji HOVERDAVIS IP1 IP2 IP3 Electric Feeder 56MM 72MM 88MM For Fuji SMT Machine - 100% Original and new for Fuji SMT Machine - New and Used Optional - MOQ: 1pcs - Lead Time: In stock Shenzhen Peishang Trading Co., Ltd operates the following SMT products: 1. SMT equipment and accessories...