FORMS - 6588 Annonces

Jeudi 10 mars 2022

Prix : 1000-6000USD

Hot Runner Mould for Pump Base Hot Runner Molds for Water Pump Bases The hot runner injection molding process is an advanced concept of thermal engineering which refers to moulds using a heated device to make them melt in the runner never solidify. We provide you with different types...

Jeudi 10 mars 2022

1G SFP EZX GrenTech 1.25G SFP EZX uses a 1550nm DFB laser and APD receiver, it can transmit up to 120km over single-mode fiber. It complaints with sfp+ MSA and SFF-8472, mainly uses in base stations, Gigabit Ethernet long-distance transmission, etc. Get 1.25G SFP EZX price now! 1G...

Jeudi 10 mars 2022

1G SFP EX GrenTech 1.25G SFP EX uses a DFB laser and it is a duplex LC connector. It can transmit up to 40km over 9/125uF single-mode fiber and compliants with SFF-8472 and sfp module MSA, the performance is stable, mainly uses in 1G Ethernet switches, routers and fiber channel switches, etc...

Jeudi 10 mars 2022

10G SFP+ SR GrenTech 10gb sfp+ sr transceiver adopts 850nm VCSEL laser to transmit up to 300m in OM3 sr multimode fiber. The OSA adopts COB technology, which effectively reduces power consumption and cost on the premise of ensuring product performance. It compliants with 802.3AE 10GBASE-SR...

Jeudi 10 mars 2022

10G SFP+ LR GrenTech 10 base lr can transmit up to 10km over single-mode fiber. It adopts the most popular lasers in the market, like Mitsubishi, II-VI, Uxfastic and Semtech. The performance is stable and it compliants with 10G Ethernet IEEE 802.3ae and SFF-8421, and it is widely...

Jeudi 10 mars 2022

10G sfp+ zrGrenTech 10G SFP+ 40km's transmitter uses a cooling 1550nm EML laser, and receiver uses a PIN laser. The power consumption is less than 1.5W, with ultra-low EMI and excellent ESD protection, mainly uses in 10GBASE-ER/EW, 10GBASE-ER/EW + FEC, 10G Storage system, LTE optical...

Jeudi 10 mars 2022

10G SFP+ DWDM GrenTech 10g dwdm sfp+ uses a C-band fixed wavelength (100GHz or 50GHz) cooled EML laser, with a PIN (40km) or APD (80km) receiver. It supports 10GE and OTN OTU2e standards and is compatible with SONET/SDH and 10G Fiber Channel. Contact GrenTech for more 10g dwdm sfp+ transceivers...

Jeudi 10 mars 2022

10G SFP+ CWDM The 10g cwdm sfp+ transceiver adopts DFB laser without refrigeration CWDM at the TX terminal, the wavelength ranges from 1270nm to 1610nm, and it adopts PIN at the receiving end. The maximum power consumption is less than 2W, compliants IEEE 802.3AE and SFF-8431 standards...

Jeudi 10 mars 2022

Prix : 5000-50000USD

Gantry container crane Portal Crane is indispensable lifting equipment for ports, shores, and wharfs, and they play a vital role in the efficient operation of wharfs. Portal Crane mainly includes Port Container Crane, Container Handling Crane, Container Gantry Crane, Quayside Container Crane...

Mercredi 09 mars 2022

Malaria Test Kit Malaria is a serious parasitic disease characterized by fever, chills, and anemia and is caused by a parasite that is transmitted from one human to another by the bite of infected Anopheles mosquitoes. Thereare four kinds of malaria that can infect humans: Plasmodium...

Mercredi 09 mars 2022

H.pylori infects more than half the people in the world. The prevalence of the infection varies among countries and among different groups within the same country. The prevalence rate in the United State suggests an incidence of infection of 2%. The lifetime prevalence of peptic ulcer...

Mercredi 09 mars 2022

Prix : 100USD

Two shot molding, also called double shot moulding, dual shot injection molding，multi shot injection molding or 2k injection moulding is one category of injection molding using two different thermoplastic materials to produce injection molded parts in two colors or two components...

Mercredi 09 mars 2022

Prix : 100USD

What is plastic injection molding? Plastic Injection molding is a molding method that combines injection and molding. The advantages of plastic injection molding method are fast production speed, high efficiency, operation can be automated, variety of colors, shapes can be from simple to complex...

Mercredi 09 mars 2022

Prix : 100USD

Over molding is a special plastic molding process. Overmolding insert molding is similar to the two-color molding or two-shot molding process. Metal overmolding can make the surface of the product full of softness and increase product functionality and added value. With this technology...

Mercredi 09 mars 2022

Methyltrichlorosilane (M1) 390 Name: Methyltrichlorosilane (M1) Feature: This product is a colorless transparent liquid. It is the main material of silicone products to produce methyltriethoxysilane and silane crosslinking agent (methyl triethoxysilane and methyltrimethoxysilane)...

Mercredi 09 mars 2022

Name: Fumed silica Appearance: Fluffy white powder. Technical Data of Fumed Silica Item Indexes The nitrogen adsorption specific surface area/（m2/g） Typical values±30 Loss on ignition/% ≤ 2.5 Silica content/% ≥ 99.8 Suspension PH 3.7~4.5 Al2O3 content/（mg/kg） ≤ 400 TiO2...

Mercredi 09 mars 2022

This product is a colorless transparent liquid, inflammable, explosive. Dimethyl dichloro silane is the raw material of silicone products, the reaction generated under the influence of water HCL, avoid sharp, contact heat, fire, and static electric spark. Document Download Technical...

Mercredi 09 mars 2022

Product Name: Dimethylcyclosiloxane (DMC) Molecular Formula: [(CH3 ) 2 SiO]n ，n=3~7 CAS No.: 69430-24-6 Physical and Chemical Properties: Flash Point: 55℃ Relative Density (water=1): 0.956 Appearance: Colorless transparent liquid without visible impurity Technical Data of Dimethylcyclosiloxane...

Mercredi 09 mars 2022

Prix : 10-30USD

A Wall lamp is typically a lighting fixture that is installed on the wall or headboard. Lamp light for wall, as a kind of cheap lamps for sale, comes in a wide variety of different forms due to different purposes, such as vanity lights, bedside wall lights, task wall lights, corridor wall lights...

Mercredi 09 mars 2022

Quantité : 100000 - Prix : 40.00-200.00 USD

It's a 1 piece structure composed of multiple layers od ballistic fibre and PVB resin for top protection. The ergonomically designed shell over the head center line provides optimum coverage of the head form the fatal threats of fragments and shrapnel. Integrate outer shell and adjustable...

Mardi 08 mars 2022

Insert Mould Insert molding is an injection molding process used to encapsulate a component in a plastic part. The insert injection molding process can be divided into two basic steps. First, the component is loaded into the mold before the molding process. Second, it takes the shape...

Mardi 08 mars 2022

Basic Dental Equipment We have a variety of instruments and equipment for tooth preparation, dental extraction forceps, surgical scissors, probes, orthodontic tools, syringes, spatulas，they are widely used in all kinds of dental surgery. Explorers The Explorers are used to probe the...

Mardi 08 mars 2022

What Is a Dental Handpiece Dental handpiece burs is a tool commonly used in dental treatment for oral patients. Dental handpiece cleaning machine can be divided into high speed handpiece and low speed handpiece.The speed of high-speed handpiece reaches 350-420,000 revolutions per minute...

Mardi 08 mars 2022

420J1 stainless steel: After quenching, it has high hardness and good corrosion resistance (magnetic). After quenching, the hardness of 420J2 stainless steel is higher than that of 420J1 steel (magnetic). There are 44 equivalent materials for AISI 420 Equivalent Stainless Steel. Generally...

Mardi 08 mars 2022

410 stainless steel strip 1mm is a stainless steel grade produced in accordance with the American ASTM standard, which is equivalent to my country's 1Cr13 stainless steel material, S41000 (American AISI, ASTM). Carbon content 0.15%, chromium content 13%, 410 stainless steel strip...

Mardi 08 mars 2022

AISI 310s is austenitic chromium-nickel stainless steel with good oxidation resistance and corrosion resistance. Because of the higher percentage of chromium and nickel, 310S has much better creep strength, can work continuously at high temperatures, and has good high temperature resistance ...

Mardi 08 mars 2022

304H stainless steel is a high-carbon material of 304 stainless steel. We provide ss 304 sheet in good price. More details of the ss 304 sheet price , please contact us. The H in 304H refers to high temperature. High carbon content is the guarantee of high-temperature strength. GB150...

Mardi 08 mars 2022

It is a higher-end variety in the J series, suitable for small-angle deep-drawn products, and most products that require deep-drawing and salt spray tests will choose it. Such as sinks, kitchen utensils, bathroom products, kettles, thermos cups, door hinges, pots, etc. Sus 201 J4...

Mardi 08 mars 2022

201 grade stainless steel has certain acid and alkali resistance, high density, no bubbles, no pinholes, etc. It is used to produce high-quality materials for various watch cases and watchband back covers. Mainly used to make decorative tubes, industrial tubes, and some shallow stretched...

Mardi 08 mars 2022

BALL VALVES As one of pneumatic ball valve suppliers , MstnLand provides high performance ball valve products, including Trunnion mounted ball valve, Floating ball valve, Welded structure ball valve, Top entry ball valve, Wafer ball valve, Butt treaded socket welding ball valve...