MANUFACTURERS，INDUSTRIAL - 28060 Annonces

Mardi 06 février 2024

This kind of steel bristle brush is mainly used on the surface of the workpiece, the internal polishing of the groove. We can provide an aluminum alloy base as required for installation. At the same time, the strip brush with steel bristles can be made in various types of derivative patterns...

Mardi 06 février 2024

Silicon Carbide Disc Brush The Silicon Carbide Brush is specially used to deal with the surface of the metal, such as cast iron, aluminum, steel. Metal parts produced by cutting or die casting will inevitably have burr or flanging. If the burrs are not removed, it will lead to the...

Mardi 06 février 2024

STATIONARY SEATS Rotary and stationary seal ring are the main components of a mechanical seal, which is a device that helps join systems or mechanisms together by preventing leakage. Stationary Seats (Mating Rings) are the non-rotating primary seal ring mounted in the gland plate...

Mardi 06 février 2024

Our single cartridge type seal is manufactured by balanced seal-face technology, helping to reduce energy comsumption whilst increasing reliability. Cartridge Mechanical Seal Types Cartridge type mechanical seal is assembled by the rotary ring, stationary ring, spring, secondary seal( o rings...)

Mardi 06 février 2024

Introduction of Seal Spare Parts Spring For a mechanical seal, the initial closing force ensures that the seal will function properly from startup. In end- or rotating-face mechanical seal designs, the initial closing force is provided by a spring component, which can be a single coil spring...

Mardi 06 février 2024

Seal Spare Sleeve Mechanical Part In most pumps, the portion of the shaft that is under the sealing arrangement is covered with a shaft sleeve. The shaft sleeve is a sleeve of metal, usually bronze or stainless steel, that is designed to either slide or thread onto the shaft. It...

Mardi 06 février 2024

MICRO RIGHT ANGLE PCB CONNECTOR D-SUB TYPE The right angle pin connector features gold-plated BeCu Twist Pin contacts for best performance. Sunkye Micro d sub connector pcb mount connector matches with MIL-DTL-83513 standard and accept standard jackscrews and jackpots, available...

Mardi 06 février 2024

MICRO PCB CONNECTORS PCB electrical connectors are mounted on the PCB and are typically used for PCB to PCB interconnection, or to transfer to or from the PCB from another source within the unit. Sunkye Military/Space grade micro common PCB connectors qualified with MIL-DTL-83513 standard...

Mardi 06 février 2024

MICRO CRIMP CONNECTORS These Micro-D Crimp contact type connectors feature gold-plated Becu Twist Pin contacts for best performance, the sectional area of cable: 0.1mm2~0.15mm2, 0.07mm2. Micro Crimp Style Electrical Connectors for Choice Sunkye R04A Mil Spec Crimp Style Connector...

Mardi 06 février 2024

SUNKYE TYPES OF MIL SPEC CONNECTORS Mil spec connectors, also called military grade connectors/mil grade connectors or military pcb connectors or military standard connectors or military power connectors, have been developed to satisfy the market requirements for ultra-tiny size...

Mardi 06 février 2024

Quantité : 5-2000 uni - Prix : $269-$2000

Thermal vision, see and analyze the temperature. AT31F adopts a high-performance VOx detector with high resolution and high sensitivity. Combined with the Matrix Ⅲ patented image algorithm, it provides clearer images and more temperature details. Its patented intelligent temperature...

Mardi 06 février 2024

Quantité : 5-2000 uni - Prix : $269-$2000

Eye II Series V2.0 Thermal Monocular Xeye E3 max V2 InfiRay, leading manufacturer of uncooled IRFPA InfiRay concentrates on developing infrared thermal imaging technologies and manufacturing relevant products, with completely independent intellectual property rights. InfiRay is committed...

Mardi 06 février 2024

Quantité : 5-2000 uni - Prix : $269-$2000

Portable Thermal Camera No matter how big or small the target, we have the right portable thermal imaging camera for problem solving. Portable thermal camera is a good helper for engineers with its compact and easy-taking size. Accurate temperature measurement and night vision functions...

Mardi 06 février 2024

Quantité : 5-2000 uni - Prix : $269-$2000

InfiRay®, Leader of Infrared Thermal Imaging InfiRay® concentrates on developing infrared thermal imaging technologies and manufacturing relevant products, with completely independent intellectual property rights. InfiRay is committed to providing global customers with professional...

Mardi 06 février 2024

Quantité : 100000/day

The Performance Characteristics of 3V Winding Supercapacitor： High energy, high power series Kamcap's 3v supercapacitor series is available in temperatures ranging from -40 to +65 °C and is suitable for long-term stability in high pressure environments. SE/HE series kamcap super capacitor...

Mardi 06 février 2024

Quantité : 100000/day

Performance of MK Module Series Ultracapacitor Kamcap supercapacitor energy storage module with supercapacitor protection circuit, good stability and high conversion efficiency. The voltage and capacity of the super capacitor are improved by series and parallel connection, and it...

Mardi 06 février 2024

Quantité : 100000/day

Low ESR Winding Type Series Performance Characteristics of Low ESR Winding Supercaps Low internal resistance series supercaps. This product uses a new internal design and advanced materials to ensure low ESR. Typical Application of Low ESR Supercapacitor RAM, Detonator, car recorder...

Mardi 06 février 2024

Prix : 0.5-3

Portable flap wheels were made by bonding radial flaps of abrasive into a hub fitted with a spindle shank. These were intended for use with electric drills and were limited to a maximum speed of around 1,000 rpm. Specifications of Flap Wheel Abrasive Sanding Wheels With developments...

Mardi 06 février 2024

Quantité : 100000/day

Performance Characteristics of Low ESR Winding Supercaps Low internal resistance series supercaps. This product uses a new internal design and advanced materials to ensure low ESR. Typical Application of Low ESR Cap RAM, Detonator, car recorder, smart meter, vacuum switch, digital camera...

Mardi 06 février 2024

Prix : 0.5-3

Vulcanized fiber discs (commonly known as fiber discs) are round grinding wheels with a backing made of vulcanized fiber that is coated on one side with resin and abrasive grain. Abrasive fiber disc is fitted to suitable backing pads and used on angle grinders, predominantly for...

Mardi 06 février 2024

Quantité : 100000/day

Types of High Temperature Supercapacitor for Sale 2.7V High Temperature Series High temperature 85℃; Rated voltage 2.7V 1000 hours; Surge voltage 2.85V; Capacity range 1.0F~100F; Operating supercapacitor temperature range -40 ~ +85℃; Capacity attenuation ≤ 30%, internal resistance...

Mardi 06 février 2024

Floor shot blaster is a kind of shot blasting machine for concrete floors, steel plates. The bead blaster floor machine can clean up the floatation and impurities on the surface of the concrete at one time. It can also roughen the surface of the concrete road to make it uniform and rough...

Mardi 06 février 2024

Rotary shot blasting machine or table type shot blasting machine is suitable for various shapes and dimensions, casts, forged parts, pressed parts, steel, and non-ferrous metal parts and parts made from fragile materials, cleaning surface, removing casting sand and filings, consolidating...

Mardi 06 février 2024

Prix : 300USD-20000USD

In the EV charging industry, CHARGE-UNI has launched the latest generation of vehicle charging piles with years of technical precipitation by an excellent research team, which covers the four mainstream charging standard, like CHARGE-UNI's IEC standard DC charging piles are optional...

Mardi 06 février 2024

Prix : 300USD-20000USD

Industrial Car Charger With the development of the economy, people's awareness of environmental protection has been strengthened. Advocating energy saving and low carbon is an inevitable trend of social development. At present, the rapid development of industry has also brought...

Mardi 06 février 2024

Prix : 300USD-20000USD

Home Charger for Car With the further development of electric car batteries, more and more people are considering electric cars other than fuel ones, which results in explosive growth of home charging box. Unlike commercial charging stations, residential charging equipment do not...

Mardi 06 février 2024

Prix : 300USD-20000USD

Electric Vehicle Charging Applications 01 / 03 Commercial EV Car Charger High-performance AC and DC charging piles are widely used in the commercial area, its rapid power supply ability would reduce much time on charging. 02 / 03 Industrial EV Charger Up to 180KW chargers reach industrial needs...

Mardi 06 février 2024

This shape of a mold is predetermined by a mould, a block that has been hollowed out. Aluminum, steel, alloys, and copper are the most common materials used to build it. It's made up of various other mold parts, too. Our mold spare parts include lifters and ejectors as well as guides...

Mardi 06 février 2024

When it comes to plastic injection mold parts, precise moulds and precision equipment are required for precision molding or PIM. Among the topics covered in this blog are general ideas, specific traits and qualities, as well as specific options for plastic materials, precision moulds...

Lundi 05 février 2024

Overview Single-layer & three-chamber solar panel laminating machine has a loading stage, two heating laminating stages, one cooling laminating stage, and an unloading stage. Single-Layer & Three-Chamber Photovoltaic Module Laminator Advantages Single-layer and three-chamber...