PIPE - 7586 Annonces

Samedi 13 mars 2021

FEEJOY Turbine Flow Meter is a new type of intelligent measuring instrument integrating turbine flow sensors and display integration calculation. The turbine type flow meter adopts advanced ultra-low power single-chip microcomputer technology with anti-lightning and low-cost features...

Samedi 13 mars 2021

FEEJOY rotating vane flow meter is a type of highly machined precision variable area flowmeter capable of handling higher volumes and pressures than diaphragm meters. With each turn, they move a specific quantity of fluid through the meter. In a vertical cone tube that expands from...

Vendredi 05 mars 2021

Hot rolling refers to the process in which the steel is rolled above the recrystallization temperature. After cooling at room temperature, the steel is normalized and cooled to become a hot rolled finished steel product. If the application is not strict on diameter tolerance and surface finish...

Vendredi 05 mars 2021

Hot-rolling refers to a metalworking process in which the steel is rolled at above recrystallization temperature (usually exceeds 1000℉). Being heated past its recrystallization point, the steel can be properly formed, shaped, and produced in larger quantities. After being cooled...

Vendredi 05 mars 2021

OVERVIEW OF HOT ROLLED CHECKERED COIL Hot rolled checkered coils are a type of hot rolled steel coils with rhombic (teardrop) shapes on its surface. Because of the rhombic patterns, the surface of the plates is rough, which can be utilized in manufacturing products like floorboards...

Vendredi 05 mars 2021

Forging refers to a process that involves forming a metal using localized compressive forces, and it can be further divided into cold forging, warm forging, or hot forging based on temperature at which it is performed. Compared with cast steel bars, hot forged bars are harder, stronger...

Vendredi 05 mars 2021

OVERVIEW OF HOT DIPPED GALVANIZED STEEL COIL Hot-dip galvanizing refers to the process of applying a protective zinc coating to a steel sheet or iron sheet, in order to prevent rusting. As the full hard steel has undergone acid washing followed by a rolling process through the zinc pot...

Vendredi 05 mars 2021

OVERVIEW OF H-BEAM STEEL H-beam steel is a type of structural steel beam. It is named H-beam steel because of the capital H shape over its cross section with equal thickness in the two parallel flanges with no taper on the inside surface. H-beam with a competitive price is a versatile...

Vendredi 05 mars 2021

OVERVIEW OF galvanized welded steel pipe(Z60-Z500) Galvanized welded steel with competitive prices are a type of welded steel that have been coated with a layer of zinc. Zinc's intrinsic characteristics provide a barrier against corrosion, so galvanised welded steel pipe & tube...

Vendredi 05 mars 2021

OVERVIEW OF FORGED CARBON STEEL FLANGE The steel flange is a kind of steel ring, which could be forged or casted. The forged carbon steel flanges are designed to mechanically connect the part of a pipe to another pipe or a pressure vessel, pump, valve, or any other device. They usually...

Vendredi 05 mars 2021

Introduction Of Outdoor Artificial Washington Palm Tree aterial Leaves: UV-protected Plastic Leaves Trunk: Outside: UV-protected Fiberglass And Plastic Trunk Inside: Strong Steel Pipe Bottom: Square Steel Plate Total height 5 m-15 m (16 ft-50 ft) Diameter of the crown 3...

Vendredi 05 mars 2021

Introduction Of Outdoor Artificial Royal Coconut Tree If you want to create a tropical landscape, or if you are interested in the beautiful royal coconut trees in the tropics, we highly recommend a variety of artificial royal coconut trees. These man-made royal coconut trees owns...

Vendredi 05 mars 2021

Introduction Of Preserved Washington Palm Beijing Palm International Group Ltd. offers preserved Washington palms, preserved by special technique by the means of the latest modern biotechnology. Each palm tree is custom made. Material 1. Leaves: Natural Preserved Leaves 2. Trunk...

Mercredi 03 mars 2021

Quantité : more than - Prix : 3000-6500 euro per M

Description of Copper Cathode Copper is one of the basic chemical elements. In its nearly pure state, copper is a reddish-orange metal known for its high thermal and electrical conductivity. It is commonly used to produce a wide variety of products, including electrical wire, cooking...

Mardi 02 mars 2021

Quantité : 10,000 - Prix : 0-50,000

Overview Of EM-5P portable flue gas analyzer EM-5P portable flue gas analyzer system mainly consists of gas monitoring sensors (SO2, NOx, CO, CO2), sample conditioning unit, sampling unit and heat tracing pipe. The main structural parts include gas sampler and pipeline, sample preconditioning...

Mardi 02 mars 2021

Quantité : 10,000 - Prix : 0-50,000

Among all the online continuous emission monitoring system suppliers in China, ZETIAN is the only high and new technology company that has a full set of intellectual property rights of flue gas monitoring. Its independent research and development products include ultraviolet glue gas analyzer...

Mardi 02 mars 2021

Quantité : 10,000 - Prix : 0-50,000

The instruments and analyzers produced by one of the best continuous emission monitoring system suppliers, ZETIAN now are widely used at home and abroad. They are: UV DOAS gas analyzer, laser TDLAS gas analyzer, gas analysis module, forward/backward laser dust monitoring devices...

Samedi 27 février 2021

The automatic temperature controlled integration oil press is built up with electricity controlling part, electric frying part, and auto heating & squeezing system, vacuum filtrating system. Automatic Temperature Control Integrated Oil Press Category: YZYX70ZWY Integrated Oil...

Mercredi 24 février 2021

Aluminum is a silvery-white, soft, non-magnetic, and ductile metal in the boron group. In recent years, aluminum tubes have been widely used in metallurgy, machinery, petrochemical, electronics, atomic energy, medical, agriculture, aerospace, and defense industries. Golden laser has...

Mercredi 24 février 2021

SUMBEXAUTO SM802 P Series low profile led strobe beacons, 4 basic mounts are available for selection. Which are made of high-quality PC dome and top-level LED for the brighter light source. 245mm height for flexible pipe mount, 200mm height for single bolt mount, 177mm height for...

Mercredi 24 février 2021

SUMBEXAUTO SM801 High Profile LED Rotating Beacons are impressively powerful for their size, which are made of high-quality PC dome and super bright LED for sufficient light source, available with 3 patterns: Rotating, strobe and Quad flash, just open the dome and set the patterns...

Vendredi 05 février 2021

Sheet metal is a comprehensive cold working process for metal sheets (usually below 6mm), including shearing, punching/cutting/compounding, folding, riveting, splicing, forming, etc. Its notable feature is the uniform thickness of the same part. The basic equipment of sheet metal...

Vendredi 05 février 2021

Plastic injection mold and molding is a method of using an injection machine to quickly inject molten plastic into a mold and solidify it to obtain various plastic products. As one of the most professional plastic injection molding suppliers, ETCN provides our client with plastic...

Vendredi 29 janvier 2021

Lanso, as a professional pressure gauge manufacturer & supplier, keeps on providing our customers with different types of comprehensive and high-quality products in the field of pressure measurement. Different types pressure measuring instruments are all strictly tested to ensure...

Mercredi 27 janvier 2021

Brief Introduction of Steel plastic Composite Pipe 1. Executive standard: GB / t28897-2012 2. Application: transportation of drinking water, hot and cold water, fire water, drainage, air conditioning water, medium and low compressed gas, compressed air and other media 3. Material...

Mercredi 27 janvier 2021

Steel can be used to transport fluids and powdered solids, exchange heat, and make mechanical parts and containers. It is also an economical type of steel. The steel pipe is used to make the frame, strut and mechanical support of the building structure, which can reduce the weight...

Mercredi 27 janvier 2021

Overview of Steel Scaffolding Scaffolding is a temporary structure used to support the original structure, and it is also used as a platform for the workers to work on the construction works. Steel scaffolding is made of steel pipe connected by steel fittings or couplers. Installation...

Mercredi 27 janvier 2021

What is S355JR? S355JR is a useful structural grade steel with a minimum yield strength of 355 N/mm². S355 is widely used in the structural engineering and vital construction industries, procviding high yield and tensile strength, and offering a variety of treatments and testing options...

Mercredi 27 janvier 2021

What is Grade S235JR Structural Steel? Structural steel is a standard building material made from specific grades of steel and molded to a series of industry-standard sectional shapes (or "sections"). Structural steel grades are designed according to specific chemical compositions...

Mercredi 27 janvier 2021

Q235 steel pipe are used to deliver low pressure fluids. Such steel is generally smelted by the converter or open-hearth furnace. The main raw material is molten iron and scrap steel. The content of sulfur and phosphorus in steel is higher than that of high-quality carbon structural steel...