AUTOMATICALLY - 4623 Annonces

Samedi 21 octobre 2017

Quantité : 500tons - Prix : USD0.015-----USD100

Magnetic tools are the tools that made with a permanent magnet. They are good helper and partner for many places. For safety, magnetic tools usually made with the strongest permanent magnets-neodymium magnets. Magnetic tools are a good helper for repair shops of automobile and motorcycle...

Vendredi 20 octobre 2017

Full hydraulic compost turner machine can be carried out in the open space or workshop greenhouse. It is equipped with cab. In order to save power, auger adopts manual up and down and double sprocket and double chain drive. Under aerobic conditions of organic matter decomposition...

Mercredi 18 octobre 2017

Specifications. Pressure Rating: 1.6- 4.0Mpa Specification: Screwed: DN15-50, Flanged: DN15-50 Material: cast steel Standard flanges: DIN, ANSI, JIS; Standard screwed: NPT BSP Performance / Advantages: Adopt imported material as its hot sensitive element, and so it is high sensitivity...

Mercredi 18 octobre 2017

Brief Introduction. Inverted bucket type steam trap,as a mechanical steam trap, has outstanding performance and can be used low ,medium and high pressure. Working Principle The design makes use of the working principle of difference in density of steam and condensate. The compound...

Mercredi 18 octobre 2017

Brief Introduction. Advantages. 1.Continues discharging saturation condensed water without accumulation, and so get the maximum thermal efficiency. 2.When steam pressure changes, the ball float can adjust the opening of valve seat without influence, and so it is stable. 3.With automatic...

Mercredi 18 octobre 2017

Vacuum Negative Pressure Safety Valve Application: Vaccum Negative pressure safety valve also can be called Vacuum Relief Valve. 1. Used for negative vacuum pressure systems: when the negative vacuum presssure in the container exceeds allowable value, safety valve will open automattically...

Mercredi 18 octobre 2017

The working temperature of the AQ-20 Air Compressor Safety Valve is less than 200℃, when the pressure of equipment exceeding the allowed value, the value will turn on automatically and discharge the pressure entirely. when the pressure decrease to the stated valve, the value will...

Mardi 17 octobre 2017

Crimp elasticity detector is mainly used to determine the curl, curl elasticity, curl recovery rate and their statistical value of 1 ~ 22dtex fiber, with display and printing function. Curl elasticity detector main features: The instrument is measured by the tension loader. The length...

Mardi 17 octobre 2017

Used to determine the static conditions of the fabric in the form of friction in the laboratory conditions. The sample was charged with a predetermined friction material, and the potential of the sample after the injection of the Faraday tube was measured, and the charge amount per...

Mardi 17 octobre 2017

Introduction UL94 horizontal and vertical combustion tester is designed to simulate the early firing situation of electronic and electrical products in order to evaluate the firing hazard through this simulation technology,. when the products are on fire the tester needs to ensure...

Mardi 17 octobre 2017

Smoke Density Tester for Building Materials Smoke Density Tester for Building Materials main purpose: Building smoke density tester, plastic smoke density tester is with built-in burning lamp, and by the smoke box into a 45 ° angle, for the determination of building materials, solid...

Mardi 17 octobre 2017

Brief Introduction: Digital Elmendorf Tearing Tester is used for determining the tear strength of fabrics, non-woven, paper, cardboard, film, woven materials, polymer film, etc. Core advantages: The Digital Elmendorf Tearing Tester is using Elmendorf method to determine the tear...

Mardi 17 octobre 2017

The Moisture Management Tester is the only instrument on the market that can precisely measure the liquid management properties of performance and technical fabrics, ensuring the comfort and protection that consumers demand. Standards: AATCC 195，SN 1689.1，GB/T 21655.2 Applications...

Mardi 10 octobre 2017

Application: Wascator FOM 71 CLS Lab Washer-extractor. Standard reference washing machine. Microprocessor controlled, up to 999 washing and drying programmes can be designed as required, input via the keyboard and stored in memory. The unit is programmed as standard with BS, ISO...

Mardi 10 octobre 2017

Application: Thermal Radiation Droplet Tester, to determine the resistance to the thermal radiation through up a radiant heat source placed on the top of the sample to generate gas combustion, droplet, fiber combustion, etc. thus the fire safety of automotive interior materials is determined...

Mardi 10 octobre 2017

Applications: Vertical Flammability Chamber for measuring the vertical flame spread for childrens' sleepwear, fabrics, other textile materials or resilient filling materials used in upholstered furniture. Comprises a draft free stainless steel cabinet with observation window and...

Mardi 10 octobre 2017

Fabric Surface Flammability Tester Standards: GB / T 8745-2001 Textiles combustion properties of the fabric surface burning time determination, ISO 10047: 1993, Textile fabric surface burning time determination Application: Suitable for measuring the surface burning time of textile...

Mardi 10 octobre 2017

Digital bursting strength tester Standards： GB/T7742, FZ/T60019, ISO 13938.2, NEXT TEST METHOD 22 2006 ,WOOLMARK TM29 2000,EDANA 80.3-99,ISO 2758,ASTMD 3786,JISL108 Scope of application: Digital bursting strength tester is used for the detection of woven, knitted, non-woven fabrics...

Samedi 23 septembre 2017

Used to determine the static conditions of the fabric in the form of friction in the laboratory conditions. The sample was charged with a predetermined friction material, and the potential of the sample after the injection of the Faraday tube was measured, and the charge amount per...

Samedi 23 septembre 2017

The Moisture Management Tester is the only instrument on the market that can precisely measure the liquid management properties of performance and technical fabrics, ensuring the comfort and protection that consumers demand. Standards: AATCC 195，SN 1689.1，GB/T 21655.2 Applications...

Samedi 23 septembre 2017

Application: Wascator FOM 71 CLS Lab Washer-extractor. Standard reference washing machine. Microprocessor controlled, up to 999 washing and drying programmes can be designed as required, input via the keyboard and stored in memory. The unit is programmed as standard with BS, ISO...

Samedi 23 septembre 2017

Application: Thermal Radiation Droplet Tester, to determine the resistance to the thermal radiation through up a radiant heat source placed on the top of the sample to generate gas combustion, droplet, fiber combustion, etc. thus the fire safety of automotive interior materials is determined...

Samedi 23 septembre 2017

Fabric Surface Flammability Tester Standards: GB / T 8745-2001 Textiles combustion properties of the fabric surface burning time determination, ISO 10047: 1993, Textile fabric surface burning time determination Application: Suitable for measuring the surface burning time of textile...

Vendredi 15 septembre 2017

Application This machine is applied to recover and purify various high-precision lubricating oil such as hydraulic oil, mechanical oil, coolant oil, gear oil, heat treatment oil, industrial oil, mineral oil and so on. The purifier can fast degas, dewater, and remove the impurity and...

Vendredi 15 septembre 2017

Application This purifier integrates fine filter, high efficiency demulsification and dehydration into one body. This machine, which can remove large of water without heating, creates the fastest dehydration. speed in domestic at present. This machine can quickly separate water from the oil...

Jeudi 14 septembre 2017

Fabric UV resistance tester Instrument features: 1. Cover the spectral region of UVA and UVB, spectral range: 290-400nm, wavelength repeatability: 0.25nm, the system data cumulative record storage interval 1,2,5 nm optional, monochrome resolution: 1.66nm, wavelength accuracy of ± 0...

Jeudi 14 septembre 2017

Medical mouth mask flame retardant property tester Standard: GB 19083-2010 medical protective mask technical requirements Scope: It is the special test equipment mainly used for testing medical masks flame retardant properties. Instrument Description: The device is a mask with a head...

Jeudi 14 septembre 2017

Flexible carpet thickness tester Standard: ISO 1765: 1986，ISO 1766: 1999 (BS)，BS 4051: 1987 (1996) ，BS 4098: 1975 (1996)，BS 5808: 1991 (1996)，Wools of New Zealand test method 142 Scope: Fabric thickness tester / elastic carpet gauge / carpet thickness meter used to measure the thickness...

Mardi 12 septembre 2017

Bally Type Flexometer 6-12-24 Working Places Standards: EN ISO 20344: 6.6, I.U.P.10+20, I.U.P.20, UNI 4818, DIN 53.351 Dauer-Faltverhalten, UNE/I.U.P.20 Ensayos de resistencia a la flexion continuada Applications： The Bally flexometer is the internationally-accepted method for the...

Vendredi 08 septembre 2017

Prix : 500 000,00 €

Introduction: Cooling the cream sandwich to make it strong enough for cutting and packing,cooling the wafer to ensure a clean cut. The capacity of the wafer cooler depends on the performance of the equipment and the cooling time required for the product. The cooling time can be set...