CURED - 440 Annonces

Mardi 05 juillet 2016

Properties: White or light gray powder (granule). The density is 1.29. Soluble in benzene, acetone, chloroform, CS2 partly soluble in , diethyl ether, CCI4 insoluble in water, gasoline and alkali with lower concentration. Meeting hot water becomes to dimethyl ammonium and CS2. Be...

Mardi 05 juillet 2016

Properties: White or light gray powder (granule). The density is 1.29. Soluble in benzene, acetone, chloroform, CS2 partly soluble in , diethyl ether, CCI4 insoluble in water, gasoline and alkali with lower concentration. Meeting hot water becomes to dimethyl ammonium and CS2. Be...

Mardi 05 juillet 2016

Properties: White or light gray powder (granule). The density is 1.29. Soluble in benzene, acetone, chloroform, CS2 partly soluble in , diethyl ether, CCI4 insoluble in water, gasoline and alkali with lower concentration. Meeting hot water becomes to dimethyl ammonium and CS2. Be...

Vendredi 08 avril 2016

Resins Characters: •Light colored and transparent granule •Applied in tyre rubber compounding, which have an excellent compatibility with a wide variety of elastomers including natural rubber (NR), synthetic rubber, polyethylene, polypropylene, Styrene-Isoprene-Styrene (SIS), Styrene...

Jeudi 31 mars 2016

Quantité : 200KG - Prix : 6.98USD

Mold making silicone rubber is generally named as two-part silicone rubber that vulcanizes at temperature. Part A is a flow-able liquid, part B is the catalyst. Applications of Mold making silicone rubber Mold making silicone rubber is mainly used in toys,gifts,decoration,plate engrave...

Mercredi 30 mars 2016

Quantité : 200KG - Prix : 10.98USD

Features and applications of Anti-yellow Electronic potting addition silicon rubber for encapsulating LED display It is a kind of low viscosity, Inherent flame resistance, two components addition cured potting silicone with heat-conducting. It cures with both on room temperature...

Dimanche 20 mars 2016

Quantité : Minimum:20 - Prix : US $6.15 - 7.98 / Ki

Condensation Silicone Rubber Product Title Welcome come to inspecting our factory, we will pick you up when you are in Guangzhou City. 4% catalyst is offered for FREE of charge Silicone range: 10-60 shore A Features Of Hot Sell High Quality Liquid Silicone Rubber for Soap Mold Making 1 ...

Vendredi 18 mars 2016

Quantité : 60t/Month - Prix : USD9.25 / kilogram

RTV-2 liquid silicone rubber for toys/ dolls/adult dolls: 1). RTV-2 liquid silicone rubber for toys/ dolls/ adult dolls are generally named as two-part addition silicone rubber that vulcanises at room temperature. 2). RTV-2 liquid silicone rubber for toys/ dolls/ adult dolls are...

Vendredi 18 mars 2016

Quantité : 60t/Month - Prix : USD9.25 / kilogram

Performance of liquid life casting silicone rubber for toy making life casting silicone rubber for toy making,liquid silicone has good mechanical performance, chemical stability with features of waterproof, corrupt resistance, physiological inert, non-toxic, tastelessness, aging-resistance...

Mardi 15 mars 2016

Quantité : 200kg - Prix : 5.15usd/kg

Mold making silicone rubber is generally named as two-part silicone rubber that vulcanizes at temperature. Part A is a flow-able liquid, part B is the catalyst. Applications of RTV-2 mold making silicone rubber for stone products: Mold making silicone rubber for stone products is...

Jeudi 10 mars 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Jeudi 10 mars 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Jeudi 10 mars 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Lundi 07 mars 2016

Quantité : 60T/MONTH - Prix : 9.4USD/KG FOB HUANGP

1.description Life casting silicone is great to make for artificial limb products such as duplicating for artificial limbs, hands, fingers, feet, other human organs, dolls, toys, body double products such as reproducing an full body from head to toe, or a torso from face to mid-section...

Lundi 07 mars 2016

Quantité : 60T/MONTH - Prix : 8.2 USD/KG FOB HUANG

1.description Platinum Cure Molding Silicone is a two parts kinds liquid silicone, which can cured on room temperature. which mainly used for mold making of concrete, stone , jewelry casting,, tire molding ,rapid protyping , vacuum foaming, any condensation silicone can used for...

Mardi 01 mars 2016

Quantité : 1 - Prix : 1,00 €

Weibao Board is a reliable substrate to receive heavy decorative finishes, such as marble or stone tiles. The board is manufactured to ISO 9001 quality management system and ISO14001 environmental management system, and has obtained the Green Product Label Award issued by National...

Mardi 01 mars 2016

Quantité : 1 - Prix : 1,00 €

WeatherPlank is made of WeatherPro-L fibre cement reinforced calcium silicate board, which is produced from a mixture of cement, silica, special cellulose fibres and selected fillers to impart durability, toughness and moisture resistance. It is then cured by an autoclaving process...

Mardi 01 mars 2016

Quantité : 1 - Prix : 1,00 €

Fireproof Board is off-white in color and has a smooth sanded surface on one side and a slightly textured reverse. It consists of fire rated minerals and calcium silicate matrix reinforced with selected fibers and special fillers. The board is then cured under an autoclave process...

Dimanche 28 février 2016

Before The Curing Performance Indicators A B Appearance Gray Fluid White Fluid Viscosity 1500～2500(cps) 1500～2500(cps) A: B 1: 1 Mixed Viscosity 1500～2500(cps) Operable Time 30～120(min) (Adjustable) Curing Time 3～5(h) After The Curing Hardness 40~50(Shore A) Dielectric...

Samedi 27 février 2016

Before The Curing Performance Indicators A B Appearance Gray Fluid White Fluid Viscosity 1500～2500(cps) 1500～2500(cps) A: B 1: 1 Mixed Viscosity 1500～2500(cps) Operable Time 30～120(min) (Adjustable) Curing Time 3～5(h) After The Curing Hardness 40~50(Shore A) Dielectric...

Samedi 27 février 2016

Before The Curing Performance Indicators A B Appearance Gray Fluid White Fluid Viscosity 1500～2500(cps) 1500～2500(cps) A: B 1: 1 Mixed Viscosity 1500～2500(cps) Operable Time 30～120(min) (Adjustable) Curing Time 3～5(h) After The Curing Hardness 40~50(Shore A) Dielectric...

Samedi 27 février 2016

Before The Curing Performance Indicators A B Appearance Gray Fluid White Fluid Viscosity 1500～2500(cps) 1500～2500(cps) A: B 1: 1 Mixed Viscosity 1500～2500(cps) Operable Time 30～120(min) (Adjustable) Curing Time 3～5(h) After The Curing Hardness 40~50(Shore A) Dielectric...

Mercredi 24 février 2016

Before the curing Appearance White paste Relative density 1.60～1.70(g/cm3) Surface drying time ≤15(min) After the curing Tensile strength ≥1.5（MPa） Elongation At Break ≥150(%) Shear strength ≥2.0(MPa) Hardness 35～45(Shore A) Temperature Range -60～200(℃) Volume resistivity 2...

Mercredi 24 février 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Mercredi 24 février 2016

Before The Curing Performance Indicators A B Appearance Gray Fluid White Fluid Viscosity 1500～2500(cps) 1500～2500(cps) A: B 1: 1 Mixed Viscosity 1500～2500(cps) Operable Time 30～120(min) (Adjustable) Curing Time 3～5(h) After The Curing Hardness 40~50(Shore A) Dielectric...

Mercredi 17 février 2016

Quantité : 2000MT - Prix : $3500/MT CIF

2016 (New Crop New Harvest) Color: Brown Odor: Characteristic Quality: Handpicked clean Size: Homogenous CG3 Volatile oil: 20%-25% Foreign matter: 0% Moisture: 13% - 15% Baby Cloves: 2% Max. Origin: Madagascar Packing: 50 Kg Bag New Jute Bags Minimum Quantity: 1 X 20 FCL...

Dimanche 01 novembre 2015

Quantité : 1000000kg - Prix : 1usd/kg

ZM-2 Aminosulfonic Superplasticizer This product, formed by sulfamic acid through chemical combination, has efficient water reducing, super plasticizing, strengthening effects and good adaptability on and to cement without toxicity and is crystal-free under low temperature. It...

Jeudi 13 août 2015

Quantité : 8000kg - Prix : 16usd/kg

1. Excellent tear & tensil strength 2. No shrinkage 3. Food grade and enviromental silicone 4. High quality but low price RTV Addition cure silicon rubber for artificial stone products applications: It mainly use for making molds for resin, stone, gypsum and cement product...

Jeudi 13 août 2015

Quantité : 8000kg - Prix : 8usd/kg

1. Product Feature of Electronic Potting Silicone Rubber HY-9055 silicone rubber is a kind of low viscosity, Inherent flame resistance, two components additi on cured potting silicone with heat-conducting. It cures with both on room temperature and heated te mperature. It has the...

Jeudi 13 août 2015

Quantité : 8000kg - Prix : 8.5usd/kg

Specification - Durable,High tear strength for replication,Low shrinkage,High simulation,Cover fine details mold making silicone rubber application mold making silicone rubber is primarily intended for mold making of gypsum, concrete, poly resin ,P U resin, unsaturated resin crafts...