Tensioactif non ionique de silicone pour l'agriculture

Property

Specification

Appearance

Colourless to amber clear liquid

Surface tension(0.1%)

21.5mN/m MAX

Viscosity(mm2/s ,@25°C)

20~45

Cloud point(1% in water solution)

10°C MAX

Dissolution

Dissolve in water

Ion type

Nonionic

Effective content:

100%

CAS NO.:

67674-67-3

NOTE OF USE

Nonionic silicone surfactant for agriculture RJ-7033 can be used as a component of 0.5~8% in agrochemical formulations. Proposing of formulations PH value is 6~8. Users should adjust the usage of nonionic silicone surfactant according to different varieties and condition, in order to achieve the most cost-effective results. Prior to the use, compatibility testing and pilot ladder testing should be done.

The tank-mix:

As a tank mix additives, wetting agent RJ-7033 can improve spray coverage, promote absorption, and reduce the amount of spray. If the spray mixture PH is 5-8, and used within 24 hours after preparation, this silicone surfactant may play the best results.

In fact, usually we add 0.025% -0.1% silicone surfactant in the low spray volume to achieve sufficient coverage. the typical usage is as follows: