QSFP 40G 1310nm 10km MPO Transceiver

An optical QSFP fiber cable with an MTP/MPO connector can be plugged into the QSFP+ module receptacle. Proper alignment is ensured by the guide pins inside the receptacle. The cable usually cannot be twisted for proper channel to channel alignment. Electrical connection is achieved through a z-pluggable 38-pin connector per MSA requirement.

The module operates with single +3.3V power supply. LVCMOS/LVTTL global control signals, such as Module Present, Reset, Interrupt and Low Power Mode, are available with the modules. A 2-wire serial interface is available to send and receive more complex control signals, and to receive digital diagnostic information. Individual channels can be addressed and unused channels can be shut down for maximum design flexibility.

The product is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP+ Multi-Source Agreement (MSA). It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. The transceiver module can be managed through the I2C two-wire serial interface.

Compatibility of QSFP Transceiver

QSFPP-40GBASE-LR4 40GBASE-LR4 QSFP+ 1310nm 10km

SRX-QSFP-40G-LR4 40GBASE-LR4 QSFP+ 1310nm 10km

JNP-QSFP-40G-LR4 40GBASE-LR4 QSFP+ 1310nm 10km

Technical Specification Of QSFP 40G 1310nm 10km MPO Transceiver

Absolute Maximum Ratings

It has to be noted that the operation in excess of any absolute maximum ratings might cause permanent damage to this module.

Parameter Symbol Min Max Units Notes

Storage Temperature TS -40 85 degC

Operating Case Temperature TOP 0 70 degC

Power Supply Voltage VCC -0.5 3.6 V

Relative Humidity (non-condensation) RH 0 85 %

Damage Threshold, each Lane THd 3.3 dBm

Recommended Operating Conditions and Power Supply Requirements

Parameter Symbol Min Typical Max Units

Operating Case Temperature TOP 0 70 degC

Power Supply Voltage VCC 3.135 3.3 3.465 V

Data Rate, each Lane 10.3125 11.2 Gb/s

Control Input Voltage High 2 Vcc V

Control Input Voltage Low 0 0.8 V

Link Distance with G.652 D 0.002 10 km

If you want to know more about qsfp+ lr4 , please visit our website.

As one of transceiver suppliers, we will do our best to meet all the needs of customers.