Transparent PC Injection Mold
0363
Donnez votre avis
Lire les avis
Ajouter au pense-bête
Imprimer
  • 2.6/5
  • 1
  • 2
  • 3
  • 4
  • 5
Détails
Chine (Rép. pop) Biens d'équipement

Signalez un abus

Biens d'équipement

Transparent PC Injection Mold

Quantité : USD3000-20   Prix : 30-40sets/per month

It is the most widely used thermocouple in the hot runner system, and it is characterized by low price and is suitable for vacuum oxidation in reduction or inert atmosphere, the temperature range is -200~800℃, but the commonly used temperature is only below 500℃ because the oxidation rate of the iron hot electrode will increase when over this temperature, the thick wire diameter wire can still be used in high temperature and has a long life, the thermocouple is resistant to hydrogen (H2) and carbon monoxide (CO) gas corrosion, but it can not be used in a high temperature (for example, 500°C) atmosphere containing sulfur (S).

Key Points of Transparent Injection Molding Design

1. In order to prevent the hot runner from being damaged during the assembly process, the hot runner with a manifold should be designed with a hot runner protection guidepost, and the protection guide post must be higher than the highest point of the hot runner nozzle by more than 10mm, the diameter of the hot runner protection guidepost can be same as the reset lever.

2. The front of the hot runner nozzle (normally the core side) must be made unilaterally larger by 2mm and 1.5mm deep to avoid the empty round table to reserve the thermal expansion space of the hot runner nozzle.

3. The runner at the front end of the hot runner nozzle is generally designed on the side of the movable mold to avoid processing the runner on the hot runner nozzle.

4. The hot runner nozzle needs to design a separate cooling gate to cool the nozzle to prevent problems such as gate drooling and string, gate vestige too high, the part surface at gate area too hot and deformation, cycle time too long.

5. Drain and venting slot should be designed on the ground side of the hot runner plate.

6. The outlet must be chamfered to prevent the temperature sensing wire or heating wire from being scratched.

7. The water and oil gates of the hot runner are generally designed in the direction of the non-operator side and the ground side.

8.For hot runner molds, a 5mm thick insulator plate should be added to the top plate, which is generally made of a bakelite board to prevent heat loss.

If you want to know more details of clear injection molded plastics, please visit our website.

Localisation : No.136 Xingwu Road,Wusha Community, Changan Town,Dongguan, China, 523877 Dongguan,
Personne à contacter : Jiang Jonh, 86 0769 8539 0209

usmmold

  • 3/5
Détail
Inscrit le 09 mars 2022

Site web : www.usm-mold.com/

Envoyer un email à usmmold

Bonne affaire : acheter au vendeur

Consultez notre guide pour effectuer une transaction en toute sécurité ! En aucun cas Algomtl ne peut être tenu responsable des annonces publiées. Seule la responsabilité du vendeur ou de l'acheteur en cas de litige est engagée.
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
Cette page concerne les importateurs et exportateurs de
Transparent PC Injection Mold

Rechercher dans la catégorie : Biens d'équipement
Rechercher dans la catégorie :
mold, transparent, injection
  • 2.9/5
  • 1
  • 2
  • 3
  • 4
  • 5
Roumanie 6230 Matières premières

Signalez un abus

Pellets de bois à bas prix
Pellets de bois à bas prix

Thursday 17 December 2015

Quantité : 5000 tons - Prix : 90euros per ton

Nous sommes fabricant direct et principal fournisseur de la norme européenne de granules de bois 6mm, 8mm avec la teneur en humidité: <</span>7% et la valeur calorifique: <</span>4.7kWh / kg. CARACTÉRISTIQUES de granulés de bois: 1. Application: Maison Chauffage 2...

Hochgatterer Handels-Gesellschaft gmbh

  • 6230 - Alpbachtal
  • +43 463 46568
  • 3/5
  • 1
  • 2
  • 3
  • 4
  • 5
France 13001 Habillement / Mode

Signalez un abus

Gilet Hunter anthracite Model 3023
Gilet Hunter anthracite Model 3023

Tuesday 09 December 2025

Quantité : 4 - Prix : 19,90 €

Taille dans le pack Du S AU XXL Couleur dans le pack anthracite Styles Fashion EN SAVOIR PLUS Découvrez ce tres beau et chaud gilet en laine melangé acrylique . Il se compose d'une capuche fourrée , deux poches plates a l'avant et fermeture de la veste a zip. Pack composé...

IT26

  • kalliente
  • 13001 - marseille
  • 04 91 91 38 69
  • 06 46 31 87 83
  • 2/5
  • 1
  • 2
  • 3
  • 4
  • 5
Taiwan 23511 High Tech

Signalez un abus

MX-1004PF/K Quad-View Video Processor
MX-1004PF/K Quad-View Video Processor

Tuesday 09 December 2025

E teaching bulletin's good helper ! Four picture screens demonstrated what you need. The MX-1004PF/K Quad-View Video Processor is an advanced video processor for multimedia presentations. It is an ideal solution for applications where up to four video signals must be displayed on...

Meicheng Audio Video Co., Ltd.

  • meicheng
  • 23511 - New Taipei City
  • 886 2 82280311