SDS-05530 0.55mm Diameter 30mm Length Glued Steel Fiber

The glued steel fiber has the best comprehensive effect, and the best combination of high strength, high flexural strength (more than 10 times continuously) and the strongest anchoring force. It is widely used in industrial floors, mortar reinforcement, shotcrete, tunnel and etc.

The Specification of SDS-05530 0.55mm Diameter 30mm Length Glued Hooked End Steel Fiber

The Advantages of SDS-05530 0.55mm Diameter 30mm Length Glued Hooked End Steel Fiber

With good dispersion in concrete;

High toughness and lower thickness;

Integrated, no pores, more efficient;

Compared with traditional concrete, concrete with glued steel fiber is more economical and efficient.

Mixing: When pouring sand and aggregates into the hopper, mix an appropriate amount of loose steel fibers evenly, and then add cement. Put it on a mixing table, dry, and mix for 2 minutes. If it is glued in rows of steel fibers, you need to add steel fibers after adding water so that the water can dissolve the bonding glue.

Put the uniformly mixed fiber concrete into the conveyor and transport.

Concrete pouring and laying should be compacted.

The Safety & Packaging of SDS-05530 0.55mm Diameter 30mm Length Hooked End Steel Fiber

Star Smith is a professional steel fibre supplier that can offer a wide range of hooked end steel fiber that meets different needs.

Packaging: 20kg or 25kg per bag/carton or as your requirements, there are 50 bags or 1000kg in a pallet,24tons per 20'container.

And the pallets should be waterproof, don't stack pallets on top of each other.

Gloves and eye protection should be used when adding the steel fibers.

If you want to know more about steel fibre rate per kg, please visit our website.