Sany 46 meters concrete pump, Isuzu chassis, RZ type, classical 5 booms, high working stability.
Manufacture Date is April of the year 2011 and pumping Volume is 124400cmb and Mileage is 35100km.
Comprehensive maintenance, direct to the construction site.
Overview of equipment:
Five-section RZ arm frame, the fabric is flexible.
X-shape outrigger, single side support, suitable for narrow site construction.
The fabric height of the three-axis chassis reaches 46 meters, and the chassis boom is configured with the best specifications.
Computer energy saving control, automatic power matching, the average energy saving is 20%.
The pump system is flexible to install, reducing the impact on the base frame and the wear of the concrete piston. reduce the impact on the base frame and the wear of the concrete piston.
The new control system is free to upgrade automatically.
The fault self-diagnosis system can automatically diagnose 150 faults and troubleshoot efficiently.
Intelligent boom system is easy to control, and can automatically pour for boom vertically or horizontally.
Safety precautions of Used Sany 46 Meters Concrete Pump
1. The supporting ground must be horizontal. Otherwise it is necessary to make a horizontal supporting surface.
2. the Sany concrete pump truck must be supported on a solid ground. If the maximum pressure of the supporting leg is greater than the allowable pressure on the ground, the supporting plate or auxiliary square shall be used to increase the supporting surface area.
3. When the Sany pump truck is supported near the pit or slope, sufficient safety spacing should be reserved.
4. When supporting, the whole machine should keep horizontal. The maximum horizontal Angle before and after the whole machine should not exceed 3 degrees.
5. When the legs are expanded or folded, the area in which they rotate is the danger zone. Individuals within the scope may be hurt.
6. When supporting, all legs must be extended to the specified position. (The supporting leg is aligned with the upper arrow on the ear, and the front supporting arm is aligned with the extension arm arrow on the front supporting leg) Otherwise there may be a danger of tilting.
7. The cantilever can be operated only when the supporting leg has been set up. The cantilever must be placed on the main support before the leg can be folded.
8. The cantilever must be closed immediately after a decrease in stability is detected. After removing disadvantageous factor, place them according to requirement afresh. The factors including rain, snow, and so on.
This page is an introduction of the used sany concrete pump and the sany concrete pumps for sale,welcome to know about it.
Localisation : Central Int'l Machinery Logistics Park, Hetang Township, Yuetang District, Xiangtan, Hunan. , 411100 hunan,
Personne à contacter : Tang Bruce , +18 1 53 79 28 25