Médical
JH-D10 Digital Trimmer 3 Modes Ear Hook BTE Hearing Aid / Hearing Amplifier
Quantité : 80000Pcs Prix : 3-50USD
Specification of JH-D10 Digital Trimmer 3 Modes Ear Hook BTE Hearing Aid Hearing Amplifier
|
Max Sound Output |
128±3dB |
Voltage |
D.C.1.4V |
Sound Gain |
57±5dB |
Battery Type |
LR44H/A675 |
Total Harmonic Wave Distortion |
500Hz <6%
800Hz <4%
1600Hz <1% |
Battery capacity/Mah |
68 |
Operation Current/mA |
≤4mA |
Operation current/mA |
<=3</span> span> |
Frequency Range |
200-5500Hz |
Working time/H |
56 |
Input Noise |
≤20dB |
Certification< /td>
| FDA |
Hearing Loss |
moderate,severe |
Machine size(cm) |
1.5*0.9*3.5
|
The feature of JH-D10 Digital Trimmer 3 Modes Ear Hook BTE Hearing Aid Hearing Amplifier
1. Digital hearing aid, Complete Digital Signal Processor(DSP), high sound quality and clear voice;
2. Low distortion and low noise output, 2-16 channels for options;
3. Noise-control Microphone and the digital signal processor can reduce the noise from the environment, help patient to get clear sound for them;
4. Antireaction, special design can reduce the feedback;
5. Strengthen and damp-proof
6. Double trimming: Low-frequency attenuation/ MPO
7. Mode Switch: Complete frequency / Noise Reduction / T-coil
8. The low battery voltage alarm
Mode Status:
Tune on: full range frequency mode.
Click on the Mode Swapping Button:
"DI": Full Range Frequency mode -- contains all the sounds in low and high frequencies;
"DIDI": Noise Cut mode--normally used in the noisy environment, cut the noise in low frequency and decrease the high frequency;
"DIDIDI": the telephone mode, used in answering phone calls or other environments
with the inductive loops, such as watching TV
Package Included
1 Digital hearing aid
3 Ear tips
2 Ear tube
1 Gift box
1 Manual book
2 AG13 battery
Precautions of JH-D10 Digital Trimmer 3 Modes Ear Hook BTE Hearing Aid Hearing Amplifier
1. Adjust volume to the minimum level or switch off before wearing.
2. To choose the right size of ear tips to avoid any extra noise.
3. Increase volume gradually to avoid the sudden increase in sound.
4. If you hear a howling, check the ear (silica gel) is appropriate and whether the size of the plug is tight, the appropriate choice of earplugs and plugged, make sure no air leakage.
5. Please regularly clean the earplugs in order to ensure the normal use of hearing aids.
6. Use for long periods of time, please remove the batteries to prevent rot erosion hearing aid components.
7. Keep out of reach of children.
8. The device is not water resistant.
Localisation : Floor 6, Huicheng Industrial Building, Huifengdong 2nd Road, Zhongkai High-Tech Zone, Huizhou City, Guangdong Province, China, 516000 Huizhou, Personne à contacter : Sara Wong, +86 0752 2299187
Bonne affaire : acheter au vendeur
Consultez notre guide pour effectuer une transaction en toute sécurité ! En aucun cas Algomtl ne peut être tenu responsable des annonces publiées. Seule la responsabilité du vendeur ou de l'acheteur en cas de litige est engagée. Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
Cette page concerne les importateurs et exportateurs de JH-D10 Digital Trimmer 3 Modes Ear Hook BTE Hearing Aid / Hearing Amplifier
Rechercher dans la catégorie : Médical Rechercher dans la catégorie :
hearing, hook, trimmer, modes, digital, amplifier
|
Dimanche 24 novembre 2024
Quantité : 1000 - Prix : 5,00 €
♦ Functions * 1-channel temperature monitor * 2-channel fan speed control * 6-level fan speed control (manual) * Fan speed storage function * Auto fan speed control → 40°C: Low 50°C: Middle 60°C: High * Immediate visual indication of Fan/HDD operation * Displays system...
Vendredi 05 avril 2013
Quantité : 250 comman - Prix : 0,60 €
Anti-reflet (mate), à revêtement dur, anti-salissante, facile à poser et s'enlève sans laisser de traces Le film de protection écran est conçu pour les écrans électroniques et offre une protection sûre contre les rayures et les salissures. La surface du film est mat et permettant...
- 29010 - MALAGA
- +34 9 12 69 23 06
Samedi 16 novembre 2024
<< Stable Operations, Continued Growth >> 5 Axis Machining Center-Eumach Co., Ltd. Eumach Co., Ltd. is a fresh business of machine tool industry, and concentrates on manufacturing 5 axis machining center, vertical horizontal machining center, universal milling machine...
- 429 - Taichung City
- +886 4 2581 0031
|