Matières premières - Import Export

Mardi 18 novembre 2014

This series of products are made from high purity materials by unique technics, which avoided the bad influence to products made by impurity and structure shorting. So they have lot of advantages such as stable volume, excellent thermal stability, high intensity, low thermal conductivity, etc...

Mardi 18 novembre 2014

The high temperature bonding agent produced by our company includes air hardening and thermal hardening types and material used includes light weight and heavy weight types. Choosing proper high temperature bonding agent ，according to the special requirements on materials of bricklaying...

Mardi 18 novembre 2014

The plastic ramming mix is characterized by good volume stability, excellent thermal shock resistance and easy construction, which can be installed on site without water addition during stirring. The mix is used plastic refractories for roof and wall of various rolling heating furnace...

Mardi 18 novembre 2014

Physical and chemical indexes Brand items index ZTJ85 ZTJ90 ZTJ93 Fixed C% >=85 >=90 >=93 H2O% <0.5</p> <0.5</p> <0.5</p> size mm 0~8 0~5 0~5 Performance Less impurity content, recovery Carbon stable, obvious...

Mardi 18 novembre 2014

Desulfurizer is the desulfurization dregs serious developed by our company for adapting out furnace refining, which not need extra expenses of investing equipment when using it. Used as out furnace desulfurization in tapping courses, it has the advantages of easy use, economic, effective...

Mardi 18 novembre 2014

Quantité : 1000 tons - Prix : 130USD per ton

The characteristics and performance of the above products: using the advanced method of composite Carbon and non-Carbon, which make the refractoriness increase, and also bring other characteristics such as long insulation watery, good spread ability, low thermal conductivity, and...

Mardi 18 novembre 2014

Physical and chemical indexes: Brand items index THG97 THG93 THG85 THG55 SiC% >=97 >=93 85±2 50±3 C% 5~10 5~15 10~20 15~30 H2O% <0.5</p> <0.5</p> <0.5</p> <3</p> Particle mm 0~200 ≤3 ≤5 ≤6...

Mardi 18 novembre 2014

Quantité : 1000 tons - Prix : 450USD per ton

Oxygen absorber is the materials used to reduce the content of Oxygen and other gases in molten steel. Our company has developed the compound deoxidize according to the needs of steel smelting application to various forms of deoxidization process. The product is good at deoxidization...

Mardi 18 novembre 2014

This product used extra alumina as the principal raw material and it is made of various additives. This product is characterized by favorable stability of heat and shock resistance, high strength and no chipping, with service life over 250 times. Physical and chemical indexes ...

Mardi 18 novembre 2014

This product is mainly used for tundish lining, which is the 3rd generation of high-tech product following insulation board and tundish coating, and this product is characterized by convenient construction, without baking and long service life. Physical and chemical indexes ...

Mardi 18 novembre 2014

Tundish coating of HN series is characterized by easy painting, no crack, erosion resistance, long service life and easy disassembly. Compared with using the insulation board, the tundish coating series can reduce nonmetallic inclusion in liquid steel, enhance cleanliness of liquid steel...

Mardi 18 novembre 2014

This plastic tube packaging is oval in 35mm with metalized screw cap mainly for BB cream, liquid foundation Characteristic: 1. Category: oval tube 2. Diameter: 35mm 3. Tube Length: Different tube length is available 4. Layer: Double layer 5. Material: Tube-PE Cap-PP 6...

Mardi 18 novembre 2014

Sliding plate fire clay has characteristics of good bonding and high refractoriness. It is the ideal material for filling sliding aperture. Physical and chemical indexes 牌号Brand HN-1 HN-2 HN-3 Al2O3 % ≥ 65 75 80 Cr2O3 %≥ 1.3 　 2 C %≥ 　 4 4 Localisation ...

Mardi 18 novembre 2014

Quantité : 2000 tons - Prix : 70-400USD per ton

Steel flow initiator is a kind of ladle slid nozzle filler which is successfully developed by our company in recent years, results show that ladle castables success rate of automatic start casting can reach above 95 percent. There is no metallic inclusion in ingot surface, is a kind...

Mardi 18 novembre 2014

Ladle gunning mixer with high grade magnesia, spinel, special binder and additive. It is characterized by good adhesion, high bonding strength, low rebound rate, easy sintering, good corrosion and erosion resistance, and is ideal material for cold and hot repairing mixer and ladle slag line...

Mardi 18 novembre 2014

Ladle permeable well block of chrome corundum and corundum spinel series are characterized by good volume stability, high strength at high temperature, strong erosion resistance to molten steel and good thermal shock resistance. It can be designed and produced integral well block...

Mardi 18 novembre 2014

Alumina-carbon slide gates are characterized by high strength, erosion resistance and good thermal shock resistance. They are preferred products for large/middle ladle and continuous casting tundish. They can meet the needs of different steel grades. Physical and chemical indexes...

Mardi 18 novembre 2014

Ladle nozzle well block series are developed with the newest matrix optimization technology and the theory of the most compact. They are characterized by good thermal shock resistance, strong washout resistance, steady quality and long life etc. Physical and chemical indexes 牌号Brand...

Mardi 18 novembre 2014

Ladle upper/lower nozzle series are developed with the newest matrix optimization technology and the theory of the most compact. They are characterized by good thermal shock resistance, strong washout resistance, steady quality and long life. Physical and chemical indexes Brand...

Mardi 18 novembre 2014

Quantité : 1000 tons - Prix : 300USD per ton

Ladle castables using with corundum aluminum magnesia spinel and fused magnesite as raw materials, which is made of micro-power technology and additive agent, are characterized by good construction function, high strength, good volume stability, erosion and washout resistance and...

Mardi 18 novembre 2014

Sand casting, the most widely used casting process, utilizes expendable sand molds to form complex metal parts that can be made of nearly any alloy. Because the sand mold must be destroyed in order to remove the part, called the casting, sand casting typically has a low production rate...

Mardi 18 novembre 2014

Low carbon magnesia carbon brick using with crystal magnesite, fused corundum, fused spinel, high purity and ultrafine graphite and nano composite antioxidant as raw materials, which are used for ladle slag line. Low carbon and carbon-free corundum spinel bricks are used for ladle...

Mardi 18 novembre 2014

Magnesia alumina carbon bricks, with high grade magnesite, corundum, spinel and graphite as raw materials, bonded by resin, are characterized by good slag resistance. The products are mainly used for ladle upper and lower slag line. Alumina magnesia carbon bricks, with high grade bauxite...

Mardi 18 novembre 2014

Quantité : 600 tons p - Prix : 1300USD/ ton

Coil grout is a kind of painting material used for fused alumina recommended for application to the inside face of coreless induction furnace coils. Containing a red color is to distinguish the coil grout from the working lining. This product offers the following benefits and features...

Mardi 18 novembre 2014

The product is characterized by high corrosion and erosion resistance against molten steel and slag, dense sintered layer, long service life, low consumption of per ton steel, easy construction and repairing, and energy saving. Physical and chemical indexes Items Medium Frequency...

Mardi 18 novembre 2014

This company produces the lining material is called “mixed sand” for short. This product is the main refractories of the medium frequency induction furnace used by the small steel enterprises. Its effect is in leading position. Physical and chemical indexes Ingredients SiO2 ...

Mardi 18 novembre 2014

Electric furnace gunning mix with magnesia based and magnesia-calcium based material, binder and sintering agent, is characterized by high bonding strength, strong corrosion resistance and non-spalling. When hot repairing temperature is higher than 1000℃, hot repairing effect is...

Mardi 18 novembre 2014

Electric furnace prefabricated part is characterized by high strength, good thermal shock resistance, corrosion resistance, steady quality and long life, etc. Physical and chemical indexes 牌号Brand DLD-1 DLD-2 化学成分 Chemical composition/%,≥ Al2O3 85 80 Cr­­2O3 2 ...

Mardi 18 novembre 2014

Quantité : 700 tons p

Furnace bottom tapping hole fillers are steel fillers used in steel tapping hole of large eccentric furnace bottom. This product developed by our company is adapted to the need of increasing gradually in large-scale furnace in recent years, an ideal product to replace imported products...

Mardi 18 novembre 2014

Quantité : 500 tons p

Taphole brick is molded at isostatic pressure, with fused magnesia and graphite as raw material. It is characterized by good oxidation resistance, high strength, good corrosion resistance, good integrity, easy replacing and long life and it is ideal material taphole of large and medium furnace...